|
Approfondimenti
Sito Internet: www.unsider.it
Presidente: Giuliano Boato
Direttore: Giuliano Corbella
Viale Sarca 336 - 20126 Milano - Tel. 0266146551 - Telefax 0266146559
CAMPO DI ATTIVITÀ
Siderurgia, compresi i materiali ferrosi in senso lato e in modo più specifico minerali metallici (cromo, ferro, manganese, ecc.), ferroleghe, prodotti di ghisa e di acciaio della prima e seconda lavorazione (colati, laminati, fucinati, stampati a caldo, trafilati, formati a freddo, saldati, ecc.): lingotti, semilavorati, prodotti piani (lamiere e nastri), prodotti lunghi (vergella, filo, barre, profilati, tubi), getti, flange, raccordi, funi, prodotti da filo (chiodi, reti, ecc.), rivestiti e no, per tutti gli impieghi - Fonderia (attrezzi, macchine, terre per fonderia, modelli, ecc.) - Materiale rotabile ferrotranviario e rotaie ferroviarie e tranviarie - Materiali e prodotti refrattari - Tubazioni industriali - Materiale, equipaggiamento e strutture in mare per le industrie del petrolio e del gas naturale - Relative attività industriali, produttive e commerciali
| TC CEN DI COMPETENZA |
|---|
| CEN/TC 107 |
Prefabricated district heating pipe systems |
| CEN/TC 12 |
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries |
| CEN/TC 168/WG 2 |
Steel wire ropes, their terminations and wire rope slings |
| CEN/TC 187 |
Refractory products and materials |
| CEN/TC 190 |
Foundry technology |
| CEN/TC 190/WG 1 |
Technical conditions of delivery and cast iron designation |
| CEN/TC 190/WG 10 |
Inner defects |
| CEN/TC 190/WG 11 |
Surface inspection |
| CEN/TC 190/WG 4 |
Production equipment, tools, foundry auxiliaries (e.g. patterns permanent moulds, moulding materials) |
| CEN/TC 190/WG 5 |
Grey cast iron and compacted graphite cast iron |
| CEN/TC 190/WG 6 |
Malleable cast iron |
| CEN/TC 190/WG 7 |
Spheroidal graphite, silicon molybdenum and austempered ductile iron |
| CEN/TC 190/WG 8 |
High alloyed cast iron |
| CEN/TC 202 |
Foundry machinery |
| CEN/TC 203 |
Cast iron pipes, fittings and their joints |
| CEN/TC 242/WG 3 |
Ropes |
| CEN/TC 267 |
Industrial piping and pipelines |
| CEN/TC 342 |
Metal hoses, hose assemblies, bellows and expansion joints |
| CEN/TC 74 |
Flanges and their joints |
| TC ISO DI COMPETENZA |
|---|
| ISO/TC 102 |
Iron ore and direct reduced iron |
| ISO/TC 102/SC 1 |
Sampling |
| ISO/TC 102/SC 2 |
Chemical analysis |
| ISO/TC 102/SC 3 |
Physical testing |
| ISO/TC 105 |
Steel wire ropes |
| ISO/TC 132 |
Ferroalloys |
| ISO/TC 17 |
Steel |
| ISO/TC 17/SC 1 |
Methods of determination of chemical composition |
| ISO/TC 17/SC 10 |
Steel for pressure purposes |
| ISO/TC 17/SC 11 |
Steel castings |
| ISO/TC 17/SC 12 |
Continuous mill flat rolled products |
| ISO/TC 17/SC 15 |
Railway rails and their fasteners |
| ISO/TC 17/SC 16 |
Steels for the reinforcement and prestressing of concrete |
| ISO/TC 17/SC 17 |
Steel wire rod and wire products |
| ISO/TC 17/SC 19 |
Technical delivery conditions for steel tubes for pressure purposes |
| ISO/TC 17/SC 19/WG 1 |
Non-destructive testing |
| ISO/TC 17/SC 20 |
General technical delivery conditions, sampling and mechanical testing methods |
| ISO/TC 17/SC 3 |
Steels for structural purposes |
| ISO/TC 17/SC 4 |
Heat treatable and alloy steels |
| ISO/TC 17/SC 9 |
Tinplate and blackplate |
| ISO/TC 17/WG 21 |
Calculation Method for CO2 emission Intensity at steel production sites |
| ISO/TC 25 |
Cast irons and pig irons |
| ISO/TC 33 |
Refractories |
| ISO/TC 5 |
Ferrous metal pipes and metallic fittings |
| ISO/TC 5/SC 1 |
Steel tubes |
| ISO/TC 5/SC 1/WG 4 |
Coatings of tubular products |
| ISO/TC 5/SC 10 |
Metallic flanges and their joints |
| ISO/TC 5/SC 11 |
Metal hoses and expansion joints |
| ISO/TC 5/SC 2 |
Cast iron pipes, fittings and their joints |
| ISO/TC 5/SC 5 |
Threaded fittings, solder fittings, welding fittings, pipe threads, thread gauges |
| ISO/TC 67 |
Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries |
| ISO/TC 67/SC 2 |
Pipeline transportation systems |
| ISO/TC 67/SC 3 |
Drilling and completion fluids, and well cements |
| ISO/TC 67/SC 4 |
Drilling and production equipment |
| ISO/TC 67/SC 5 |
Casing, tubing and drill pipe |
| ISO/TC 67/SC 6 |
Processing equipment and systems |
| ISO/TC 67/SC 7 |
Offshore structures |
| TC ECISS DI COMPETENZA |
|---|
| ECISS/TC 10 |
Structural steels - Grades and qualities |
| ECISS/TC 10/SC 1 |
Structural steel - Hollow sections |
| ECISS/TC 10/SC 4 |
Structural steels - Sheet piling |
| ECISS/TC 100 |
General issues |
| ECISS/TC 101 |
Test methods for steel (other than chemical analysis) |
| ECISS/TC 102 |
Methods of chemical analysis for iron and steel |
| ECISS/TC 103 |
Structural steels other than reinforcements |
| ECISS/TC 104 |
Concrete reinforcing and prestressing steels |
| ECISS/TC 105 |
Steels for heat treatment, alloy steels, free-cutting steels and stainless steels |
| ECISS/TC 106 |
Wire rod and wires |
| ECISS/TC 107 |
Steels for pressure purposes |
| ECISS/TC 108 |
Steel sheet and strip for electrical applications |
| ECISS/TC 109 |
Coated and uncoated flat products to be used for cold forming |
| ECISS/TC 11 |
Structural steel sections and hot rolled steel bars for engineering use - Dimensions and tolerances |
| ECISS/TC 110 |
Steel tubes, and iron and steel fittings |
| ECISS/TC 110/WG 1 |
Tubes for pressure purposes |
| ECISS/TC 110/WG 10 |
Tubes for mechanical and general engineering purposes |
| ECISS/TC 110/WG 3 |
Fittings |
| ECISS/TC 110/WG 4 |
Coatings for steel tubes |
| ECISS/TC 110/WG 5 |
Tube for the conveyance of aqueous liquids |
| ECISS/TC 110/WG 6 |
Tube threads and service tubes |
| ECISS/TC 110/WG 7 |
Dimensions and tolerances |
| ECISS/TC 110/WG 9 |
Non-destructive testing |
| ECISS/TC 111 |
Steel castings and forgings |
| ECISS/TC 12 |
Structural steels and steels for pressure purposes, flat products - Dimensions and tolerances |
| ECISS/TC 15 |
Wire-rod - Qualities, dimensions, tolerances and specific tests |
| ECISS/TC 19 |
Concrete reinforcing and prestressing steels - Properties, dimensions, tolerances and specific tests |
| ECISS/TC 19/SC 1 |
Reinforcing steel not for prestressing |
| ECISS/TC 19/SC 2 |
Prestressing steels |
| ECISS/TC 2 |
Steel - Physico-chemical and non-destructive testing |
| ECISS/TC 20 |
Methods of chemical analysis of ferrous products |
| ECISS/TC 22 |
Steels for pressure purposes - Qualities |
| ECISS/TC 23 |
Steels for heat treatment, alloy steels and free-cutting steels - Qualities and dimensions |
| ECISS/TC 23/SC 1 |
Stainless steels |
| ECISS/TC 27 |
Surface coated flat products - Qualities, dimensions, tolerances and specific tests |
| ECISS/TC 27/SC 1 |
Continuously organic coated (coil coated) steel flat products |
| ECISS/TC 29 |
Steel tubes and fittings for steel tubes |
| ECISS/TC 29/SC 1 |
Tubes for pressure purposes |
| ECISS/TC 29/SC 10 |
Non-destructive testing |
| ECISS/TC 29/SC 11 |
Tubes for mechanical and general engineering purposes |
| ECISS/TC 29/SC 2 |
Line pipe |
| ECISS/TC 29/SC 3 |
Fittings |
| ECISS/TC 29/SC 6 |
Tube threads and service tubes |
| ECISS/TC 29/SC 7 |
Terminology and symbols |
| ECISS/TC 29/SC 8 |
Dimensions and tolerances |
| ECISS/TC 29/SC 9 |
Mechanical testing of tubes |
| ECISS/TC 30 |
Steel wires |
| ECISS/TC 30/SC 1 |
Wire coatings |
| ECISS/TC 30/SC 2 |
Steel wire for springs |
| ECISS/TC 31 |
Steel castings |
| ECISS/TC 5 |
Definition, classification and conventional designation of pig iron and ferro alloys |
|
