Compila i campi per il download gratuito della UNI/PdR richiesta





Si No


Trattamento dei dati personali – informativa ex art.13 DLgs. 196/2003

Ai sensi dell'articolo 13 del DLgs. 196/2003, UNI - titolare del trattamento dei dati, domiciliato in via Sannio 2 - 20137 Milano - informa che i dati richiesti sono raccolti e trattati per finalità di:

- verifica che non vengano violate le norme sul diritto d’autore - informazione e promozione commerciale di prodotti e servizi UNI - indagini di mercato inerenti le attività UNI.

Per quanto riguarda il trattamento dei dati, esso viene effettuato in modo da garantire la sicurezza e riservatezza degli stessi mediante:

- strumenti manuali - strumenti informatici.

Nel caso in cui non venisse accordato il consenso al trattamento dei dati si segnala che verranno meno le prestazioni richieste di cui al punto precedente senza che UNI possa essere tenuto responsabile per il disservizio. Infine, come previsto dall'art. 7 del DLgs. 196/2003, si comunica al conferente dati che è in suo diritto accedere ai propri dati per consultarli, aggiornarli, cancellarli nonché opporsi al loro trattamento per legittimi motivi.

Trattamento dei dati personali – Consenso ex artt. 23,24,25 DLgs. 196/2003

Il sottoscritto, dato atto di avere ricevuto l'informativa prevista all'art. 13 del DLgs. 196/2003 in materia di tutela delle persone e di altri soggetti rispetto al trattamento dei dati personali, espressamente garantisce il suo consenso ai sensi degli articoli 23, 24, 25 del summenzionato decreto (inclusivo di raccolta, registrazione, organizzazione, conservazione, elaborazione, modificazione, selezione, estrazione, raffronto, utilizzo, interconnessione, blocco, comunicazione, diffusione, cancellazione, distruzione) secondo i termini della summenzionata informativa e nei limiti ivi indicati, dei propri dati personali acquisiti o che saranno acquisiti in futuro dall'UNI.

X

MENU

Sito Internet: www.unichim.it
Presidente:
Bruno Brianzoli
Segretario Generale:
Giovanni Perego

Piazzale R. Morandi 2 - 20121 Milano - Tel. 0276004450 - Telefax 0276014176

CAMPO DI ATTIVITÀ
Problemi analitici di base - Pitture per edilizia, vernici per legno, per materie plastiche e per la protezione di strutture in metallo - Adesivi - Prodotti petroliferi e lubrificanti - Fluidi per la lavorazione dei metalli - Combustibili solidi - Agenti tensioattivi - Campionamento ed analisi delle acque reflue, superficiali, potabili, ecc. - Campionamento, metodologie di analisi, determinazione degli inquinanti nell'atmosfera e nei flussi delle emissioni - Campionamento e analisi negli ambienti di lavoro e studi sul microclima ambientale - Metodi di analisi per i principali prodotti antiparassitari e determinazione dei loro residui - Prodotti fertilizzanti - Prodotti aromatizzanti e oli essenziali - Disinfettanti - Incapsulanti per cemento amianto - Interpretazione delle norme sulla certificazione per il settore chimico - Taratura della strumentazione analitica chimica - Metodi informatici di statistica chimica - Chemiometria - Analisi delle superfici - Validazione di metodi analitici - Materiali di riferimento - Sistemi di gestione della qualità, dell'ambiente, della sicurezza e dell'igiene ambientale nell'industria chimica - Fuochi artificiali - Esplosivi per uso civile - Sistemi qualità nei laboratori microbiologici

 

TC CEN DI COMPETENZA
ASD-STAN Aerospace
ASD-STAN/D 0 Technical Authority
ASD-STAN/D 1 General
ASD-STAN/D 1/S 1 LOTAR Long Term Archiving and Retrieval of Digital Technical Product Data
ASD-STAN/D 1/S 2 MOAA Modular and Open Avionics Architecture
ASD-STAN/D 1/S 3 ICE Ideal Cabin Environment
ASD-STAN/D 1/S 4 UAS Unmanned Air Systems
ASD-STAN/D 1/S 5 RFID Radio Frequency IDentification
ASD-STAN/D 2 Electrical
ASD-STAN/D 2/S 1 Electrical Network
ASD-STAN/D 2/S 10 Optical
ASD-STAN/D 2/S 2 Cables & Stripping Tools
ASD-STAN/D 2/S 3 Elements of Connection (Connectors, Contacts, rear accessories, crimping tools
ASD-STAN/D 2/S 4 Relays, Switches, Push-Buttons
ASD-STAN/D 2/S 5 Protection Devices
ASD-STAN/D 2/S 6 Lighting (Lamps, LED, etc.)
ASD-STAN/D 2/S 7 Batteries
ASD-STAN/D 2/S 8 Installation Technologies
ASD-STAN/D 2/S 9 Data Bus
ASD-STAN/D 3 Mechanical
ASD-STAN/D 3/S 1 Parts of Mechanical Systems
ASD-STAN/D 3/S 2 Fasteners
ASD-STAN/D 3/S 3 Hydraulics
ASD-STAN/D 4 Materials
ASD-STAN/D 4/S 1 Light Alloys
ASD-STAN/D 4/S 3 Steels
ASD-STAN/D 4/S 4 Welding / Brazing
ASD-STAN/D 4/S 5 Test Methods
ASD-STAN/D 4/WG 8 Composite
ASD-STAN/D 6 Quality
ASD-STAN/D 6/S 1 EAQG European Aerospace Quality Group
ASD-STAN/D 7 E-Standards
ASD-STAN/D 8 Customer & Product Support
CEN/CLC/ETSI/JWG eAcc European Joint WG on eAccessibility under mandate M/376
CEN/CLC/JWG 1 Energy audits
CEN/CLC/JWG 3 Energy Management and related services - General requirements and qualification procedures
CEN/CLC/JWG 4 Energy efficiency and saving calculation
CEN/CLC/JWG 8 Privacy management in products and services
CEN/CLC/JWG 9 Energy measurement plan for organisations
CEN/CLC/JWG AIMD CEN/CENELEC Joint Working Group on Active Implantable Medical Devices
CEN/CLC/TC 1 Criteria for conformity assessment bodies
CEN/CLC/TC 2 Power Engineering
CEN/CLC/TC 3 Quality management and corresponding general aspects for medical devices
CEN/CLC/TC 4 Services for fire safety and security systems
CEN/CLC/TC 5 Space
CEN/SS B02 Structures
CEN/SS C01 Food Products
CEN/SS F01 Technical drawings
CEN/SS F02 Units and symbols
CEN/SS F05 Measuring Instruments
CEN/SS F12 Information Processing Systems
CEN/SS F16 Graphical symbols
CEN/SS F17 Administrative documents
CEN/SS F20 Quality assurance
CEN/SS H10 Sewing machines
CEN/SS H22 Smokers' lighters
CEN/SS H99 Products for household and leisure use - Undetermined
CEN/SS I09 Small tools
CEN/SS M11 Powder metallurgy
CEN/SS N21 Gaseous fuels and combustible gas
CEN/SS S02 Transfusion equipment
CEN/SS S03 Syringes
CEN/SS S26 Environmental management
CEN/SS S99 Health, environment and medical equipment - Undetermined
CEN/SS T01 Shipbuilding and maritime structures
CEN/TC 10 Lifts, escalators and moving walks
CEN/TC 10/SC 1 Building hoists
CEN/TC 102 Sterilizers and associated equipment for processing of medical devices
CEN/TC 104 Concrete and related products
CEN/TC 104/SC 1 Concrete - Specification, performance, production and conformity
CEN/TC 104/SC 3 Admixtures for concrete
CEN/TC 104/SC 8 Protection and repairs of concrete structures
CEN/TC 106 Large kitchen appliances using gaseous fuels
CEN/TC 107 Prefabricated district heating and district cooling pipe system
CEN/TC 109 Central heating boilers using gaseous fuels
CEN/TC 110 Heat exchangers
CEN/TC 110/WG 1 Heat exchangers used in the field of refrigeration and air conditioning
CEN/TC 110/WG 6 Revision of EN 308
CEN/TC 112 Wood-based panels
CEN/TC 113 Heat pumps and air conditioning units
CEN/TC 113/WG 10 Heat pumps for domestic hot water production and revision of EN 16147
CEN/TC 113/WG 11 Direct expansion-to-water units
CEN/TC 113/WG 14 Revision of EN 1397
CEN/TC 113/WG 6 Refrigerant compressors - Presentation of performance data
CEN/TC 113/WG 7 Heat Pumps, air conditioners and chilling liquid packages - testing and rating at part load conditions
CEN/TC 113/WG 8 Rating and testing for performance
CEN/TC 113/WG 9 Sound rating of heat pumps, air conditioners and liquid chilling packages
CEN/TC 114 Safety of machinery
CEN/TC 119 Intermodal Loading Units and Cargo Securing (ILUCS)
CEN/TC 12 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
CEN/TC 121 Welding and allied processes
CEN/TC 121/SC 4 Quality management in the field of welding
CEN/TC 122 Ergonomics
CEN/TC 123 Lasers and photonics
CEN/TC 124 Timber structures
CEN/TC 125 Masonry
CEN/TC 125/WG 2 Mortar
CEN/TC 125/WG 4 Test methods
CEN/TC 126 Acoustic properties of building elements and of buildings
CEN/TC 126/WG 6 Laboratory measurement of the flanking transmission
CEN/TC 126/WG 7 Laboratory measurement of airborne and structure borne sound from building equipment
CEN/TC 127 Fire safety in buildings
CEN/TC 127/WG 3 Fire Doors
CEN/TC 128 Roof covering products for discontinuous laying and products for wall cladding
CEN/TC 128/SC 1 General requirements for roofing products - Types and scope of tests
CEN/TC 128/SC 10 Gutters
CEN/TC 128/SC 11 Double skin metal faced insulating sandwich panels for roofing and cladding
CEN/TC 128/SC 2 Concrete roofing tiles
CEN/TC 128/SC 3 Clay roofing tiles
CEN/TC 128/SC 4 Fibre-cement products for roofing
CEN/TC 128/SC 6 Bitumen shingles and corrugated sheets for roofing
CEN/TC 128/SC 7 Roofing products from metal sheet
CEN/TC 128/SC 8 Slate and stone products for roofing
CEN/TC 128/SC 9 Prefabricated accessories for roofing
CEN/TC 129 Glass in building
CEN/TC 130 Space heating appliances without integral heat sources
CEN/TC 130/WG 10 Trench convectors and fan assisted radiators and convectors
CEN/TC 130/WG 11 Radiators
CEN/TC 130/WG 12 Connections for heating appliances
CEN/TC 130/WG 13 Determination of parameters for the efficiency of heating and cooling emission products in relation to prEN 15316-2. Coordination - Group
CEN/TC 130/WG 7 Pre-fabricated heating panels, definitions, testing and methods for determining heat outputs
CEN/TC 130/WG 9 Floor heating - Systems and components
CEN/TC 131 Gas burners using fans
CEN/TC 132 Aluminium and aluminium alloys
CEN/TC 132/WG 16 Aluminium alloys for marine applications (shipbuilding, marine and offshore structure)
CEN/TC 132/WG 7 Sheets, strips and plates
CEN/TC 133 Copper and copper alloys
CEN/TC 133/WG 1 Unwrought copper products
CEN/TC 133/WG 10 Methods of analysis
CEN/TC 133/WG 2 Rolled flat products
CEN/TC 133/WG 3 Copper tubes (installation and industrial)
CEN/TC 133/WG 4 Extruded and drawn products, forgings and scrap
CEN/TC 133/WG 8 Fittings
CEN/TC 134 Resilient, textile and laminate floor coverings
CEN/TC 135 Execution of steel structures and aluminium structures
CEN/TC 136 Sports, playground and other recreational facilities and equipment
CEN/TC 136/SC 1 Playground equipment for children
CEN/TC 137 Assessment of workplace exposure to chemical and biological agents
CEN/TC 138 Non-destructive testing
CEN/TC 138/WG 11 Themographic testing
CEN/TC 139 Paints and varnishes
CEN/TC 140 In vitro diagnostic medical devices
CEN/TC 142 Woodworking machines - Safety
CEN/TC 143 Machine tools - Safety
CEN/TC 143/WG 1 Metal forming machine tools - Safety
CEN/TC 144 Tractors and machinery for agriculture and forestry
CEN/TC 144/WG 1 General safety requirements
CEN/TC 144/WG 2 Tractors and self propelled machines
CEN/TC 144/WG 3 Mobile machines and trailers
CEN/TC 144/WG 4 Portable machines and pedestrian controlled machines
CEN/TC 144/WG 6 Manually portable forestry machinery
CEN/TC 144/WG 7 Garden equipment
CEN/TC 144/WG 8 Forestry machinery
CEN/TC 145 Plastics and rubber machines
CEN/TC 146 Packaging machines - Safety
CEN/TC 147 Cranes - Safety
CEN/TC 148 Continuous handling equipment and systems - Safety
CEN/TC 149 Power-operated warehouse equipment
CEN/TC 15 Inland navigation vessels
CEN/TC 150 Industrial Trucks - Safety
CEN/TC 150/WG 2 Variable reach trucks
CEN/TC 151 Construction equipment and building material machines - Safety
CEN/TC 151/WG 1 Earth-moving machinery - Safety
CEN/TC 152 Fairground and amusement park machinery and structures - Safety
CEN/TC 153 Machinery intended for use with foodstuffs and feed
CEN/TC 154 Aggregates
CEN/TC 154/SC 1 Aggregates for mortars
CEN/TC 154/SC 2 Aggregates for concrete, including those for use in roads and pavements
CEN/TC 154/SC 3 Bituminous bound aggregates
CEN/TC 154/SC 4 Hydraulic bound and unbound aggregates
CEN/TC 154/SC 5 Lightweight aggregates
CEN/TC 154/SC 6 Test methods
CEN/TC 155 Plastics piping systems and ducting systems
CEN/TC 155/WG 1 Installation outside building structures of flexible piping systems and rainwater infiltration and storage/attenuation systems
CEN/TC 155/WG 10 Systems of polyolefin material for soil & waste discharge and non-pressure drainage and sewerage
CEN/TC 155/WG 12 Pressure systems of polyolefin material for gas supply, water supply and drainage and sewerage
CEN/TC 155/WG 13 Systems with structured-wall pipes for non-pressure drainage and sewerage - PE, PP, PVC-U
CEN/TC 155/WG 14 Systems of glass-reinforced thermosetting plastics for all applications - Polyester, epoxy and polyester resin based concrete
CEN/TC 155/WG 15 Pipes and fittings for piping systems for rainwater discharge
CEN/TC 155/WG 16 Systems for hot and cold water applications
CEN/TC 155/WG 17 Rehabilitation of pipeline systems
CEN/TC 155/WG 20 Thermoplastics ancillaries for soil and waste discharge and gravity buried drainage and sewerage systems
CEN/TC 155/WG 21 Assessment of conformity
CEN/TC 155/WG 23 Thermoplastics systems for industrial applications
CEN/TC 155/WG 25 Recycling of PVC-U, PE and PP materials
CEN/TC 155/WG 26 Systems for storm water handling
CEN/TC 155/WG 27 Environmental aspects
CEN/TC 155/WG 28 Lifetime expectancy
CEN/TC 155/WG 6 PVC piping systems for non-pressure soil and waste and solid-wall piping systems for underground drainage
CEN/TC 155/WG 8 Systems for water supply and pressure drainage and sewerage - PVC-U (solid wall)
CEN/TC 156 Ventilation for buildings
CEN/TC 156/WG 1 Terminology
CEN/TC 156/WG 14 Ventilation of commercial kitchens
CEN/TC 156/WG 16 Joint Working Group between CEN/TC 156 and CEN/TC 113 - Multifunctional balanced ventilation units for single family dwellings, including heat pumps
CEN/TC 156/WG 17 Fans
CEN/TC 156/WG 18 Ventilation in hospitals
CEN/TC 156/WG 19 Joint Working Group between CEN/TC 156, CEN/TC 169 and CEN/TC 371 - Revision of EN 15251:2007
CEN/TC 156/WG 2 Natural and mechanical powered residential ventilation
CEN/TC 156/WG 20 Revision of EN 13779
CEN/TC 156/WG 21 Revision of calculation standards EN15241, 15242 and 15243
CEN/TC 156/WG 23 Guidelines for inspection of ventilation systems and air conditioning systems
CEN/TC 156/WG 3 Ductwork
CEN/TC 156/WG 4 Air terminal devices
CEN/TC 156/WG 5 Air handling units
CEN/TC 156/WG 6 Design criteria for the indoor environment
CEN/TC 156/WG 8 Installation
CEN/TC 156/WG 9 Fire precautions for air distribution systems in buildings
CEN/TC 158 Head protection
CEN/TC 159 Hearing protectors
CEN/TC 160 Protection against falls from height including working belts
CEN/TC 161 Foot and leg protectors
CEN/TC 162 Protective clothing including hand and arm protection and lifejackets
CEN/TC 162/WG 9 Motorcycle rider protective clothing
CEN/TC 163 Sanitary appliances
CEN/TC 164 Water supply
CEN/TC 164/WG 8 Sanitary tapware
CEN/TC 164/WG 9 Drinking water treatment
CEN/TC 165 Waste water engineering
CEN/TC 165/WG 4 Manhole tops, gully tops, drainage channels and other ancillary components for use outside buildings
CEN/TC 166 Chimneys
CEN/TC 166/SC 2 Chimneys and their components with inner linings of metal
CEN/TC 166/SC 2/WG 1 Corrosion Test Method
CEN/TC 166/SC 2/WG 2 System Chimneys and Test Methods
CEN/TC 166/SC 2/WG 3 Metal chimneys - Liners and connecting flue pipes
CEN/TC 166/SC 2/WG 4 Multiappliance systems
CEN/TC 166/SC 2/WG 5 Metal chimneys for room sealed applications
CEN/TC 166/WG 1 General requirements
CEN/TC 166/WG 2 Thermal and fluid dynamic calculation methods for chimneys
CEN/TC 166/WG 3 Clay/Ceramic chimneys
CEN/TC 166/WG 4 Chimneys and their components with inner linings of plastic
CEN/TC 166/WG 5 Chimneys and their components with inner linings of concrete
CEN/TC 167 Structural bearings
CEN/TC 168 Chains, ropes, webbing, slings and accessories - Safety
CEN/TC 169 Light and lighting
CEN/TC 169/WG 1 Basic terms and criteria
CEN/TC 169/WG 11 Daylight
CEN/TC 169/WG 12 Joint Working Group with CEN/TC 226 - Road lighting
CEN/TC 169/WG 2 Lighting of work places
CEN/TC 169/WG 3 Emergency lighting in buildings
CEN/TC 169/WG 4 Sports lighting
CEN/TC 169/WG 6 Tunnel lighting
CEN/TC 169/WG 7 Photometry
CEN/TC 169/WG 9 Energy performance of buildings
CEN/TC 170 Ophthalmic optics
CEN/TC 171 Heat cost allocation
CEN/TC 171/WG 1 Heat cost allocators
CEN/TC 172 Pulp, paper and board
CEN/TC 175 Round and sawn timber
CEN/TC 176 Heat meters
CEN/TC 176/WG 2 Heat Meters - Requirements, test methods and technical editing
CEN/TC 177 Prefabricated reinforced components of autoclaved aerated concrete or light-weight aggregate concrete with open structure
CEN/TC 178 Paving units and kerbs
CEN/TC 178/WG 1 Precast concrete products
CEN/TC 178/WG 2 Natural stone products
CEN/TC 180 Decentralized gas heating
CEN/TC 181 Dedicated liquefied petroleum gas appliances
CEN/TC 182 Refrigerating systems, safety and environmental requirements
CEN/TC 182/WG 10 Eco design requirements
CEN/TC 182/WG 11 Revision of EN 14624
CEN/TC 182/WG 2 Design and testing
CEN/TC 182/WG 4 Competence
CEN/TC 182/WG 6 Revision of EN 378
CEN/TC 182/WG 7 JWG CEN/TC 182/CEN/TC 54 Pressure vessels for refrigerating systems
CEN/TC 182/WG 9 Tightness of components
CEN/TC 183 Waste management
CEN/TC 184 Advanced technical ceramics
CEN/TC 184/SC 1 Advanced technical ceramics - ceramic composites
CEN/TC 185 Fasteners
CEN/TC 185/WG 6 Structural bolting
CEN/TC 186 Industrial thermoprocessing - Safety
CEN/TC 186/WG 1 Industrial furnaces and heating equipment - Common safety requirements
CEN/TC 186/WG 2 Combustion and fuel handling systems - Safety requirements
CEN/TC 186/WG 3 Controlled atmospheres - Safety requirements
CEN/TC 186/WG 4 Particular safety requirments for hot dip galvanising-;Salt bath-; Material melting, remelting and liquid phase maintaining-; Vacuum-thermoprocessing
CEN/TC 186/WG 5 Noise test code for industrial thermoprocessing equipment including its ancillary handling equipment
CEN/TC 187 Refractory products and materials
CEN/TC 188 Conveyor belts
CEN/TC 189 Geosynthetics
CEN/TC 19 Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin.
CEN/TC 19/JWG 1 Vegetable fats and oils and their by-products for use in automotive fuels (Joint working group with CEN/TC 307)
CEN/TC 19/WG 14 Cold flow properties
CEN/TC 19/WG 15 Vapour pressure methods
CEN/TC 19/WG 27 Elemental analysis of petroleum and related products
CEN/TC 19/WG 31 Total contamination
CEN/TC 19/WG 33 Bio-lubricants
CEN/TC 19/WG 34 Diesel fuel cold operability correlation
CEN/TC 19/WG 36 Precision evaluation
CEN/TC 19/WG 38 New Fuels Coordination and Planning
CEN/TC 19/WG 39 Lubricity and seizure protection
CEN/TC 19/WG 40 Distillation characteristics
CEN/TC 19/WG 9 Chromatographic test methods
CEN/TC 190 Foundry technology
CEN/TC 190/WG 9 Cast magnesium
CEN/TC 191 Fixed firefighting systems
CEN/TC 191/SC 1 Smoke and heat control systems and components
CEN/TC 191/WG 1 Fire extinguishing media - Powder
CEN/TC 191/WG 10 Water mist systems
CEN/TC 191/WG 2 Foam extinguishing systems
CEN/TC 191/WG 3 Fire extinguishing media - Foam
CEN/TC 191/WG 4 Powder extinguishing systems
CEN/TC 191/WG 5 Sprinkler systems
CEN/TC 191/WG 6 Gas extinguishing Systems and components
CEN/TC 191/WG 9 Hydrant and hose reel systems
CEN/TC 192 Fire and Rescue Service Equipment
CEN/TC 193 Adhesives
CEN/TC 193/SC 1 Adhesives for wood and derived timber products
CEN/TC 193/WG 1 General terminology - General physical and chemical tests
CEN/TC 193/WG 2 Structural adhesives
CEN/TC 193/WG 3 Adhesives for paper and board, packaging and disposable sanitary products
CEN/TC 193/WG 4 Building adhesives
CEN/TC 193/WG 5 Adhesives for leather and footwear
CEN/TC 194 Utensils in contact with food
CEN/TC 195 Air filters for general air cleaning
CEN/TC 195/WG 1 Particulate air filters for general ventilation
CEN/TC 195/WG 2 HEPA and ULPA filters
CEN/TC 195/WG 4 Filter face dimension of air filters for general ventilation
CEN/TC 195/WG 5 Gas phase filters
CEN/TC 195/WG 6 Execution of Mandate M/461
CEN/TC 196 Machines for underground mines - Safety
CEN/TC 197 Pumps
CEN/TC 198 Printing and paper machinery - Safety
CEN/TC 202 Foundry machinery
CEN/TC 203 Cast iron pipes, fittings and their joints
CEN/TC 204 Sterilization of medical devices
CEN/TC 205 Non-active medical devices
CEN/TC 206 Biological and clinical evaluation of medical devices
CEN/TC 207 Furniture
CEN/TC 208 Elastomeric seals for joints in pipework and pipelines
CEN/TC 209 Zinc and zinc alloys
CEN/TC 209/WG 6 Methods of analysis and testing
CEN/TC 210 GRP tanks and vessels
CEN/TC 211 Acoustics
CEN/TC 212 Pyrotechnic articles
CEN/TC 213 Cartridge operated hand-held tools - Safety
CEN/TC 214 Textile machinery and accessories
CEN/TC 215 Respiratory and anaesthetic equipment
CEN/TC 216 Chemical disinfectants and antiseptics
CEN/TC 217 Surfaces for sports areas
CEN/TC 218 Rubber and plastics hoses and hose assemblies
CEN/TC 219 Cathodic protection
CEN/TC 223 Soil improvers and growing media
CEN/TC 224 Personal identification and related personal devices with secure element, systems, operations and privacy in a multi sectorial environment
CEN/TC 224/WG 6 User Interface
CEN/TC 225 AIDC technologies
CEN/TC 226 Road equipment
CEN/TC 226/WG 1 Crash barriers, safety fences, guard rails and bridge parapets
CEN/TC 226/WG 11 Variable message signs
CEN/TC 226/WG 2 Horizontal road signs
CEN/TC 226/WG 3 Vertical signs
CEN/TC 226/WG 4 Traffic control
CEN/TC 226/WG 6 Noise reducing devices
CEN/TC 227 Road materials
CEN/TC 227/WG 5 Surface characteristics
CEN/TC 228 Heating systems and water based cooling systems in buildings
CEN/TC 228/WG 1 General performance requirements of heating systems and sub-systems in buildings
CEN/TC 228/WG 4 Calculation methods and system performance and evaluation
CEN/TC 228/WG 5 Hydraulic Surface Heating and Cooling Systems
CEN/TC 229 Precast concrete products
CEN/TC 23 Transportable gas cylinders
CEN/TC 230 Water analysis
CEN/TC 230/WG 1 Physical and biochemical methods
CEN/TC 230/WG 2 Biological methods co-ordination group
CEN/TC 230/WG 4 Performance Requirements for Water Monitoring Equipment
CEN/TC 231 Mechanical vibration and shock
CEN/TC 232 Compressors, vacuum pumps and their systems
CEN/TC 233 Biotechnology
CEN/TC 234 Gas infrastructure
CEN/TC 234/WG 1 Gas installations
CEN/TC 234/WG 11 Gas Quality
CEN/TC 234/WG 3 Gas Transportation
CEN/TC 234/WG 5 Gas measuring
CEN/TC 234/WG 6 Gas pressure regulation
CEN/TC 234/WG 7 Gas compression
CEN/TC 234/WG 8 Industrial piping
CEN/TC 235 Gas pressure regulators and associated safety devices for use in gas transmission and distribution
CEN/TC 236 Non industrial manually operated shut-off valves for gas and particular combinations valves-other products
CEN/TC 237 Gas meters
CEN/TC 238 Test gases, test pressures, appliance categories and gas appliance types
CEN/TC 239 Rescue systems
CEN/TC 239/WG 1 Medical vehicles and their equipment - Stretchers and other patient handling equipment
CEN/TC 240 Thermal spraying and thermally sprayed coatings
CEN/TC 241 Gypsum and gypsum based products
CEN/TC 242 Safety requirements for passenger transportation by rope
CEN/TC 243 Cleanroom technology
CEN/TC 245 Leisure accommodation vehicles
CEN/TC 246 Natural stones
CEN/TC 247 Building Automation, Controls and Building Management
CEN/TC 247/WG 3 Building Automation and Control and Building Management Systems
CEN/TC 247/WG 4 Open System Data Transmission
CEN/TC 247/WG 6 Electronic control equipment for HVAC applications, integrated room automation, controls and management systems
CEN/TC 248 Textiles and textile products
CEN/TC 248/WG 10 Size system of clothing
CEN/TC 248/WG 16 Textiles in the healthcare system
CEN/TC 248/WG 20 Safety of children's clothing
CEN/TC 248/WG 24 Test methods for the flammability of textiles
CEN/TC 248/WG 26 Textiles -Test methods for analysis of EC restricted substances
CEN/TC 248/WG 3 Ropes, slings, twines and fishing nets
CEN/TC 248/WG 30 Composition - Qualitative and quantitative analysis of fibres and fibre mixtures
CEN/TC 248/WG 31 Smart textiles
CEN/TC 248/WG 34 Joint Working Group between CEN/TC 248 and CEN/TC 252 - Risks in the sleeping environment
CEN/TC 248/WG 35 Slide (zip) fasteners
CEN/TC 248/WG 4 Coated fabrics
CEN/TC 248/WG 9 Prioritization of research topics
CEN/TC 249 Plastics
CEN/TC 249/WG 11 Plastics recycling
CEN/TC 249/WG 12 Plastics jacketing
CEN/TC 249/WG 13 Wood Plastics Composites (WPC)
CEN/TC 249/WG 14 PVC-P swimming pool liners
CEN/TC 249/WG 15 Fibre-reinforced composites
CEN/TC 249/WG 16 Welding of thermoplastics
CEN/TC 249/WG 17 Biopolymers
CEN/TC 249/WG 19 Light exposure
CEN/TC 249/WG 20 Analytical methods for contaminants in recycled plastics
CEN/TC 249/WG 21 Profiles for windows and doors
CEN/TC 249/WG 4 Decorative laminated sheets based on thermosetting resins
CEN/TC 249/WG 5 Thermoplastic profiles for building applications
CEN/TC 249/WG 7 Thermoplastic films for use in agriculture
CEN/TC 249/WG 8 Cellular plastics
CEN/TC 249/WG 9 Characterisation of degradability
CEN/TC 250 Structural Eurocodes
CEN/TC 250/SC 1 Eurocode 1: Actions on structures
CEN/TC 250/SC 10 EN 1990 Basis of structural design
CEN/TC 250/SC 11 Structural Glass
CEN/TC 250/SC 2 Eurocode 2: Design of concrete structures
CEN/TC 250/SC 2/WG 2 Design of fastenings for use in concrete
CEN/TC 250/SC 3 Eurocode 3 - Design of steel structures
CEN/TC 250/SC 4 Eurocode 4: Design of composite steel and concrete structures
CEN/TC 250/SC 5 Eurocode 5: Design of timber structures
CEN/TC 250/SC 6 Eurocode 6: Design of masonry structures
CEN/TC 250/SC 7 Eurocode 7 - Geotechnical design
CEN/TC 250/SC 8 Eurocode 8: Earthquake resistance design of structures
CEN/TC 250/SC 9 Eurocode 9: Design of aluminium structures
CEN/TC 250/WG 2 Assessment and Retrofitting of Existing Structures
CEN/TC 251 Health informatics
CEN/TC 252 Child use and care articles
CEN/TC 254 Flexible sheets for waterproofing
CEN/TC 254/SC 1 Bitumen sheeting
CEN/TC 254/SC 2 Synthetic sheets
CEN/TC 255 Hand-held, non-electric power tools - Safety
CEN/TC 256 Railway applications
CEN/TC 256/SC 1 Infrastructure
CEN/TC 256/SC 1/WG 40 Noise barriers
CEN/TC 256/SC 2 Rolling stock products
CEN/TC 256/SC 3 Rolling Stock Systems
CEN/TC 256/WG 1 Fire Protection
CEN/TC 260 Fertilizers and liming materials
CEN/TC 261 Packaging
CEN/TC 261/SC 4 Packaging and Environment
CEN/TC 261/SC 5 Primary packaging and transport packaging
CEN/TC 262 Metallic and other inorganic coatings, including for corrosion protection and corrosion testing of metals and alloys
CEN/TC 263 Secure storage of cash, valuables and data media
CEN/TC 264 Air quality
CEN/TC 265 Metallic tanks for the storage of liquids
CEN/TC 265/WG 8 Shop fabricated tanks
CEN/TC 265/WG 9 Site built tanks for liquids at ambient, refrigerated and cryogenic temperatures
CEN/TC 266 Thermoplastic static tanks
CEN/TC 266/WG 2 Thermoplastic tanks fabricated by fusion techniques
CEN/TC 266/WG 3 Thermoplastic tanks made by the blow moulding and/or the rotational moulding processes
CEN/TC 266/WG 4 Thermoplastic tanks made by the blow moulding and/or the rotational moulding processes, for the storage of oils having a flash point above 55 °C or 60 °C
CEN/TC 267 Industrial piping and pipelines
CEN/TC 268 Cryogenic vessels and specific hydrogen technologies applications
CEN/TC 269 Shell and water-tube boilers
CEN/TC 269/WG 1 Water-tube boilers
CEN/TC 269/WG 2 Shell boilers
CEN/TC 270 Internal combustion engines
CEN/TC 271 Surface treatment equipment - Safety
CEN/TC 274 Aircraft ground support equipment
CEN/TC 275 Food analysis - Horizontal methods
CEN/TC 275/WG 6 Microbiology of the food chain
CEN/TC 276 Surface active agents
CEN/TC 277 Suspended ceilings
CEN/TC 278 Intelligent transport systems
CEN/TC 279 Value management - Value analysis, function analysis
CEN/TC 281 Appliances, solid fuels and firelighters for barbecuing
CEN/TC 281/WG 1 Barbecues burning solid fuels
CEN/TC 281/WG 2 Solid fuels for use in barbecue appliances
CEN/TC 281/WG 3 Firelighters for igniting solid fuels for use in barbecue appliances.
CEN/TC 281/WG 4 Single use barbecues using solid fuels
CEN/TC 282 Installation and equipment for LNG
CEN/TC 285 Non-active surgical implants
CEN/TC 286 Liquefied petroleum gas equipment and accessories
CEN/TC 287 Geographic Information
CEN/TC 288 Execution of special geotechnical works
CEN/TC 289 Leather
CEN/TC 289/WG 1 Chemical test methods
CEN/TC 289/WG 2 Physical test methods
CEN/TC 289/WG 3 Fastness test methods
CEN/TC 289/WG 4 Technical specifications on the use of leather and terminology
CEN/TC 290 Dimensional and geometrical product specification and verification
CEN/TC 292 Characterization of waste
CEN/TC 293 Assistive products for persons with disability
CEN/TC 294 Communication systems for meters
CEN/TC 295 Residential solid fuel burning appliances
CEN/TC 295/WG 1 Cookers
CEN/TC 295/WG 2 Roomheaters
CEN/TC 295/WG 3 Open fires and inserts, with and without doors
CEN/TC 295/WG 4 Independent boilers
CEN/TC 295/WG 5 Test methods
CEN/TC 295/WG 6 Requirements of the Mandate M 129 "Space Heating Appliances"
CEN/TC 295/WG 7 Heat storage stoves
CEN/TC 295/WG 8 Mechanically Fed Roomheaters and Inserts including Open Fires
CEN/TC 295/WG 9 Tiled Stoves
CEN/TC 296 Tanks for the transport of dangerous goods
CEN/TC 297 Free-standing industrial chimneys
CEN/TC 297/WG 2 Concrete chimneys
CEN/TC 297/WG 3 Steel chimneys
CEN/TC 297/WG 4 Linings
CEN/TC 298 Pigments and extenders
CEN/TC 299 Gas-fired sorption appliances, indirect fired sorption appliances, gas-fired endothermic engine heat pumps and domestic gas-fired washing and drying appliances.
CEN/TC 301 Road vehicles
CEN/TC 301/WG 11 Safety of roller brake testers
CEN/TC 301/WG 13 L-category vehicles RMI
CEN/TC 301/WG 6 M/421 Vehicle OBD, repair and maintenance information
CEN/TC 301/WG 7 Supplementary grip devices
CEN/TC 301/WG 8 Tires pressure gauges metrology
CEN/TC 301/WG 9 Interoperability between tires pressure gauges with tires pressure management system
CEN/TC 302 Milk and milk products - Methods of sampling and analysis
CEN/TC 303 Floor screeds and screed materials
CEN/TC 304 Information and communications technologies - European localization requirements
CEN/TC 305 Potentially explosive atmospheres - Explosion prevention and protection
CEN/TC 307 Oilseeds, vegetable and animal fats and oils and their by-products - Methods of sampling and analysis
CEN/TC 308 Characterization and management of sludge
CEN/TC 309 Footwear
CEN/TC 310 Advanced automation technologies and their applications
CEN/TC 312 Thermal solar systems and components
CEN/TC 312/WG 1 Solar collectors
CEN/TC 312/WG 2 Factory made systems
CEN/TC 312/WG 3 Thermal solar systems and components; Custom built systems
CEN/TC 312/WG 4 Labelling and Marking
CEN/TC 313 Centrifuges - Safety requirements
CEN/TC 314 Mastic asphalt for waterproofing
CEN/TC 315 Spectator facilities
CEN/TC 316 Medical products utilizing cells, tissues and/or their derivatives
CEN/TC 317 Derivatives from coal pyrolysis
CEN/TC 318 Hydrometry
CEN/TC 319 Maintenance
CEN/TC 319/WG 10 Maintenance within physical asset management
CEN/TC 319/WG 9 Qualification of personnel
CEN/TC 320 Transport - Logistics and services
CEN/TC 321 Explosives for civil uses
CEN/TC 322 Equipments for making and shaping of metals - Safety requirements
CEN/TC 323 Raised access floors
CEN/TC 323/SC 1 Hollow floors
CEN/TC 325 Crime prevention through building, facility and area design
CEN/TC 326 Natural Gas Vehicles - Fuelling and Operation
CEN/TC 327 Animal feeding stuffs - Methods of sampling and analysis
CEN/TC 329 Tourism services
CEN/TC 329/WG 3 Recreational Diving Services
CEN/TC 33 Doors, windows, shutters, building hardware and curtain walling
CEN/TC 33/WG 5 Industrial, commercial and garage doors and gates
CEN/TC 330 Qualification of construction enterprises
CEN/TC 331 Postal services
CEN/TC 332 Laboratory equipment
CEN/TC 333 Cycles
CEN/TC 334 Irrigation techniques
CEN/TC 335 Solid biofuels
CEN/TC 336 Bituminous binders
CEN/TC 337 Road operation equipment and products
CEN/TC 338 Cereal and cereal products
CEN/TC 339 Slip resistance of pedestrian surfaces - Methods of evaluation
CEN/TC 340 Anti-seismic devices
CEN/TC 341 Geotechnical Investigation and Testing
CEN/TC 342 Metal hoses, hose assemblies, bellows and expansion joints
CEN/TC 343 Solid Recovered Fuels
CEN/TC 343/WG 1 Terminology and Quality Assurance
CEN/TC 343/WG 2 Fuel specifications and classes
CEN/TC 343/WG 3 Sampling, sample reduction and supplementary test methods
CEN/TC 343/WG 4 Physical/Mechanical tests
CEN/TC 343/WG 5 Chemical Tests
CEN/TC 344 Steel static storage systems
CEN/TC 345 Characterization of soils
CEN/TC 346 Conservation of Cultural Heritage
CEN/TC 347 Methods for analysis of allergens
CEN/TC 348 Facility Management
CEN/TC 349 Sealants for joints in building construction
CEN/TC 350 Sustainability of construction works
CEN/TC 351 Construction Products - Assessment of release of dangerous substances
CEN/TC 352 Nanotechnologies
CEN/TC 353 Information and Communication Technologies for Learning, Education and Training
CEN/TC 354 Non-type approved light motorized vehicles for the transportation of persons and goods and related facilities
CEN/TC 355 Lighters
CEN/TC 357 Stretched ceilings
CEN/TC 360 Coating systems for chemical apparatus and plants against corrosion
CEN/TC 361 Polymer modified bituminous thick coatings for waterproofing - Definitions/requirements and test methods
CEN/TC 362 Healthcare services - Quality management systems
CEN/TC 363 Organic contaminants (tar) in biomass producer gases
CEN/TC 364 High Chairs
CEN/TC 365 Internet Filtering
CEN/TC 366 Materials obtained from End-of-Life Tyres (ELT)
CEN/TC 367 Breath-alcohol testers
CEN/TC 369 Candle fire safety
CEN/TC 371 Energy Performance of Buildings project group
CEN/TC 371/WG 1 EPBD Standards group
CEN/TC 377 Air Traffic Management
CEN/TC 38 Durability of wood and wood-based products
CEN/TC 381 Management consultancy services
CEN/TC 382 PFOS
CEN/TC 383 Sustainably produced biomass for energy applications
CEN/TC 383/WG 3 Biodiversity and environmental aspects
CEN/TC 386 Photocatalysis
CEN/TC 388 Perimeter Protection
CEN/TC 389 Innovation Management
CEN/TC 391 Societal and Citizen Security
CEN/TC 392 Cosmetics
CEN/TC 393 Equipment for storage tanks and for filling stations
CEN/TC 393/WG 2 Leak detecting devices for tanks and pipes
CEN/TC 393/WG 3 Overfill prevention devices for static tanks for liquid petroleum fuels
CEN/TC 395 Engineering consultancy services
CEN/TC 396 Earthworks
CEN/TC 397 Baling presses - Safety requirements
CEN/TC 398 Child Protective Products
CEN/TC 399 Gas Turbines applications - Safety
CEN/TC 400 Horizontal standards in the fields of sludge, biowaste and soil
CEN/TC 401 Reduced Ignition Propensity Cigarettes
CEN/TC 402 Domestic Pools and Spas
CEN/TC 403 Aesthetic surgery and aesthetic non-surgical medical services
CEN/TC 406 Mechanical products - Ecodesign methodology
CEN/TC 407 Cylindrical helical springs made from round wire and bar - Calculation and design
CEN/TC 408 Natural gas and biomethane for use in transport and biomethane for injection in the natural gas grid
CEN/TC 409 Beauty Salon Services
CEN/TC 410 Consumer confidence and nomenclature in the diamond industry
CEN/TC 411 Bio-based products
CEN/TC 413 Insulated means of transport for temperature sensitive goods with or without cooling and/or heating device
CEN/TC 413/WG 1 Insulated means of transport for temperature sensitive goods - Equipment
CEN/TC 413/WG 2 EN 16440 - devices
CEN/TC 415 Sustainable and Traceable Cocoa
CEN/TC 416 Health risk assessment of chemicals
CEN/TC 419 Forensic Science Processes
CEN/TC 421 Emission safety of combustible air fresheners
CEN/TC 422 Side curtains ventilation systems - safety
CEN/TC 423 Means of measuring and/or recording temperature in the cold chain
CEN/TC 426 Domestic appliances used for water treatment not connected to water supply
CEN/TC 427 Services of Medical Doctors with additional qualification in Homeopathy
CEN/TC 428 Digital competences and ICT Professionalism
CEN/TC 429 Food hygiene - Commercial warewashing machines - Hygiene requirements and testing
CEN/TC 430 Nuclear energy, nuclear technologies, and radiological protection
CEN/TC 431 Service Chain for Social Care Alarms
CEN/TC 432 Competency for Customs Representatives
CEN/TC 433 Entertainment Technology - Machinery, equipment and installations
CEN/TC 434 Electronic Invoicing
CEN/TC 435 Tattooing services
CEN/TC 436 Cabin Air Quality on civil aircraft - Chemical Agents
CEN/TC 437 Electronic cigarettes and e-liquids
CEN/TC 438 Additive Manufacturing
CEN/TC 439 Private security services
CEN/TC 44 Commercial and Professional Refrigerating Appliances and Systems, Performance and Energy Consumption
CEN/TC 44/WG 1 Commercial refrigerated display cabinets
CEN/TC 44/WG 2 Service refrigerated cabinets and counters for use in commercial kitchens
CEN/TC 44/WG 3 Professional ice cream machines
CEN/TC 44/WG 4 Walk-in cold rooms
CEN/TC 44/WG 5 Refrigerated display cabinets for artisan and self made gelato
CEN/TC 44/WG 6 Commercial beverage coolers and ice cream freezers
CEN/TC 440 Electronic Public Procurement
CEN/TC 441 Fuel labelling
CEN/TC 442 Building Information Modelling (BIM)
CEN/TC 443 Feather and down
CEN/TC 443/WG 1 Feather and Down used as filling material
CEN/TC 443/WG 2 Feather and Down - Filling power
CEN/TC 444 Test methods for environmental characterization of solid matrices
CEN/TC 445 Digital information Interchange in the Insurance Industry
CEN/TC 447 Horizontal standards for the provision of services
CEN/TC 448 Funeral services
CEN/TC 449 Quality of care for elderly people in ordinary or residential care facilities
CEN/TC 46 Fireplaces for liquid fuels
CEN/TC 46/WG 1 Oil stoves with vaporizing burners
CEN/TC 46/WG 2 Fireplaces for Ethanol/Gel
CEN/TC 47 Atomizing oil burners and their components - Function - Safety - Testing
CEN/TC 47/WG 4 Oil supply systems
CEN/TC 48 Domestic gas-fired water heaters
CEN/TC 49 Gas cooking appliances
CEN/TC 50 Lighting columns and spigots
CEN/TC 51 Cement and building limes
CEN/TC 52 Safety of toys
CEN/TC 53 Temporary works equipment
CEN/TC 54 Unfired pressure vessels
CEN/TC 54/WG 5 Accumulators
CEN/TC 54/WG 51 A - Overall co-ordination, scope of standard and vessel classification
CEN/TC 54/WG 52 B - Material selection
CEN/TC 54/WG 53 C - Design methods
CEN/TC 54/WG 54 D - Manufacture
CEN/TC 54/WG 55 E - Inspection and testing
CEN/TC 54/WG 58 G - Nodular cast iron vessels
CEN/TC 54/WG 59 Creep
CEN/TC 54/WG 6 Pressure vessels constructed from nickel or nickel alloys
CEN/TC 54/WG 60 Aluminium
CEN/TC 54/WG 7 Pressure vessels constructed from titanium and titanium alloys
CEN/TC 55 Dentistry
CEN/TC 57 Central heating boilers
CEN/TC 57/WG 1 Central heating boilers for solid fuels
CEN/TC 57/WG 2 Requirements for efficiency and emission and test methods for central heating boilers
CEN/TC 57/WG 3 Oilfired air heaters
CEN/TC 57/WG 4 Low pressure boilers
CEN/TC 57/WG 5 Heating boilers for fuel oil
CEN/TC 57/WG 6 Airborne noise emissions
CEN/TC 57/WG 7 Pellet burners
CEN/TC 57/WG 8 Energy efficiency requirements for warm water storage tanks
CEN/TC 57/WG 9 Electrical power consumption for heat generators
CEN/TC 58 Safety and control devices for burners and appliances burning gaseous or liquid fuels
CEN/TC 62 Independent gas-fired space heaters
CEN/TC 67 Ceramic tiles
CEN/TC 69 Industrial valves
CEN/TC 69/WG 1 Basic standards
CEN/TC 70 Manual means of fire fighting equipment
CEN/TC 72 Fire detection and fire alarm systems
CEN/TC 74 Flanges and their joints
CEN/TC 79 Respiratory protective devices
CEN/TC 79/SC 7 Diving apparatus
CEN/TC 85 Eye protective equipment
CEN/TC 88 Thermal insulating materials and products
CEN/TC 88/WG 1 Common general test methods
CEN/TC 88/WG 10 Building equipment and industrial installations
CEN/TC 88/WG 11 Vacuum insulation products (VIP)
CEN/TC 88/WG 12 Prefabricated products of bonded expanded perlite
CEN/TC 88/WG 13 Expanded cork boards (ICB)
CEN/TC 88/WG 14 Terminology
CEN/TC 88/WG 16 Factory production control
CEN/TC 88/WG 17 Wood fibre boards (WF)
CEN/TC 88/WG 18 External thermal insulation composite systems
CEN/TC 88/WG 19 Polyethylene foam
CEN/TC 88/WG 2 Coordinating group
CEN/TC 88/WG 20 Expanded clay lightweight aggregates
CEN/TC 88/WG 21 Reflective insulation products
CEN/TC 88/WG 22 Factory made calcium silicate (CS) products
CEN/TC 88/WG 3 Mineral wool
CEN/TC 88/WG 4 Expanded polystyrene foam (EPS)
CEN/TC 88/WG 5 Rigid cellular polystyrene, extruded
CEN/TC 88/WG 6 Rigid cellular polyurethane and polyisocyanurate
CEN/TC 88/WG 7 Rigid cellular phenolic foam
CEN/TC 88/WG 8 Cellular glass (CG)
CEN/TC 88/WG 9 Mineral bonded wood wool (including multi-layered products)
CEN/TC 89 Thermal performance of buildings and building components
CEN/TC 89/WG 10 Moisture
CEN/TC 89/WG 12 Reflective insulation products
CEN/TC 89/WG 13 In-situ thermal performance of construction products, building elements and structures
CEN/TC 89/WG 7 Thermal properties of doors and windows
CEN/TC 92 Water meters
CEN/TC 93 Ladders
CEN/TC 98 Lifting platforms
CEN/TC 98/WG 3 Vehicle lifting devices
CEN/TC 99 Wallcoverings
ECISS/TC 100 General issues
ECISS/TC 101 Test methods for steel (other than chemical analysis)
ECISS/TC 102 Methods of chemical analysis for iron and steel
ECISS/TC 103 Structural steels other than reinforcements
ECISS/TC 103/WG 1 Sheet piles
ECISS/TC 103/WG 3 Hollow sections
ECISS/TC 103/WG 4 Hot-rolled patterned steel strip and plate/sheet
ECISS/TC 103/WG 5 Hot rolled steel channels, I and H sections
ECISS/TC 104 Concrete reinforcing and prestressing steels
ECISS/TC 104/WG 1 Weldable reinforcing steels
ECISS/TC 104/WG 4 Pre-stressing steels
ECISS/TC 104/WG 5 Protected and sheathed strands for pre-stressing
ECISS/TC 105 Steels for heat treatment, alloy steels, free-cutting steels and stainless steels
ECISS/TC 106 Wire rod and wires
ECISS/TC 107 Steels for pressure purposes
ECISS/TC 108 Steel sheet and strip for electrical applications
ECISS/TC 109 Coated and uncoated flat products to be used for cold forming
ECISS/TC 110 Steel tubes, and iron and steel fittings
ECISS/TC 110/WG 1 Tubes for pressure purposes
ECISS/TC 110/WG 10 Tubes for mechanical and general engineering purposes
ECISS/TC 110/WG 2 Line pipe
ECISS/TC 110/WG 3 Fittings
ECISS/TC 110/WG 5 Tube for the conveyance of aqueous liquids
ECISS/TC 110/WG 6 Tube threads and service tubes
ECISS/TC 110/WG 7 Dimensions and tolerances
ECISS/TC 110/WG 9 Non-destructive testing
ECISS/TC 111 Steel castings and forgings



TC ISO DI COMPETENZA
IIW International Institute of Welding
ISO/CASCO Committee on conformity assessment
ISO/IEC JPC 2 Joint Project Committee - Energy efficiency and renewable energy sources - Common terminology
ISO/IEC JPC 2/WG 1 Energy efficiency - Concepts and diagrams
ISO/IEC JPC 2/WG 2 Inputs from existing reference documents
ISO/IEC JPC 2/WG 3 Renewable energy sources - Terms and definitions
ISO/IEC JTC 1 Information technology
ISO/IEC JTC 1/SC 17 Cards and personal identification
ISO/IEC JTC 1/SC 2 Coded character sets
ISO/IEC JTC 1/SC 22 Programming languages, their environments and system software interfaces
ISO/IEC JTC 1/SC 23 Digitally Recorded Media for Information Interchange and Storage
ISO/IEC JTC 1/SC 24 Computer graphics, image processing and environmental data representation
ISO/IEC JTC 1/SC 25 Interconnection of information technology equipment
ISO/IEC JTC 1/SC 27 IT Security techniques
ISO/IEC JTC 1/SC 27/WG 1 Information security management systems
ISO/IEC JTC 1/SC 27/WG 5 Identity management and privacy technologies
ISO/IEC JTC 1/SC 28 Office equipment
ISO/IEC JTC 1/SC 29 Coding of audio, picture, multimedia and hypermedia information
ISO/IEC JTC 1/SC 29/WG 11 Coding of moving pictures and audio
ISO/IEC JTC 1/SC 31 Automatic identification and data capture techniques
ISO/IEC JTC 1/SC 32 Data management and interchange
ISO/IEC JTC 1/SC 34 Document description and processing languages
ISO/IEC JTC 1/SC 35 User interfaces
ISO/IEC JTC 1/SC 35/WG 6 User interfaces accessibility
ISO/IEC JTC 1/SC 36 Information technology for learning, education and training
ISO/IEC JTC 1/SC 37 Biometrics
ISO/IEC JTC 1/SC 38 Cloud Computing and Distributed Platforms
ISO/IEC JTC 1/SC 39 Sustainability for and by Information Technology
ISO/IEC JTC 1/SC 40 IT Service Management and IT Governance
ISO/IEC JTC 1/SC 6 Telecommunications and information exchange between systems
ISO/IEC JTC 1/SC 7 Software and systems engineering
ISO/IEC JTC 1/WG 11 Smart cities
ISO/PC 245 Cross-border trade of second-hand goods
ISO/PC 252 Natural gas fuelling stations for vehicles
ISO/PC 273 Customer contact centres
ISO/PC 277 Sustainable procurement
ISO/PC 278 Anti-bribery management systems
ISO/PC 280 Management Consultancy
ISO/PC 283 Occupational health and safety management systems
ISO/PC 286 Collaborative business relationship management -- Framework
ISO/PC 287 Chain of custody of wood and wood-based products
ISO/PC 295 Audit data collection
ISO/PC 302 Guidelines for auditing management systems
ISO/PC 305 Sustainable non-sewered sanitation systems
ISO/REMCO Committee on reference materials
ISO/TC 1 Screw threads
ISO/TC 10 Technical product documentation
ISO/TC 10/SC 1 Basic conventions
ISO/TC 10/SC 10 Process plant documentation
ISO/TC 10/SC 6 Mechanical engineering documentation
ISO/TC 10/SC 8 Construction documentation
ISO/TC 10/WG 16 3D models: Presentation of product definition data
ISO/TC 10/WG 18 Drawing and writing instruments
ISO/TC 10/WG 19 Harmonization ISO 129 and ISO 128 series
ISO/TC 100 Chains and chain sprockets for power transmission and conveyors
ISO/TC 101 Continuous mechanical handling equipment
ISO/TC 102 Iron ore and direct reduced iron
ISO/TC 102/SC 1 Sampling
ISO/TC 102/SC 2 Chemical analysis
ISO/TC 102/SC 3 Physical testing
ISO/TC 104 Freight containers
ISO/TC 104/SC 1 General purpose containers
ISO/TC 104/SC 2 Specific purpose containers
ISO/TC 104/SC 4 Identification and communication
ISO/TC 105 Steel wire ropes
ISO/TC 105/WG 5 Steel wire ropes for general purposes -- Minimum requirements
ISO/TC 106 Dentistry
ISO/TC 106/SC 1 Filling and restorative materials
ISO/TC 106/SC 2 Prosthodontic materials
ISO/TC 106/SC 3 Terminology
ISO/TC 106/SC 4 Dental instruments
ISO/TC 106/SC 6 Dental equipment
ISO/TC 106/SC 7 Oral care products
ISO/TC 106/SC 8 Dental implants
ISO/TC 106/SC 9 Dental CAD/CAM systems
ISO/TC 107 Metallic and other inorganic coatings
ISO/TC 107/SC 3 Electrodeposited coatings and related finishes
ISO/TC 107/SC 4 Hot dip coatings (galvanized, etc.)
ISO/TC 107/SC 7 Corrosion tests
ISO/TC 107/SC 8 Chemical conversion coatings
ISO/TC 108 Mechanical vibration, shock and condition monitoring
ISO/TC 108/SC 2 Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures
ISO/TC 108/SC 3 Use and calibration of vibration and shock measuring instruments
ISO/TC 108/SC 4 Human exposure to mechanical vibration and shock
ISO/TC 108/SC 5 Condition monitoring and diagnostics of machine systems
ISO/TC 108/SC 6 Vibration and shock generating systems
ISO/TC 109 Oil and gas burners
ISO/TC 109/WG 1 Forced draught gas burners
ISO/TC 109/WG 2 Forced draught oil burners
ISO/TC 11 Boilers and pressure vessels
ISO/TC 110 Industrial trucks
ISO/TC 110/SC 1 General terminology
ISO/TC 110/SC 1/WG 1 Terminology of complete industrial trucks
ISO/TC 110/SC 2 Safety of powered industrial trucks
ISO/TC 110/SC 4 Rough-terrain trucks
ISO/TC 110/SC 5 Sustainability
ISO/TC 111 Round steel link chains, chain slings, components and accessories
ISO/TC 111/SC 1 Chains and chain slings
ISO/TC 111/SC 3 Components and accessories
ISO/TC 112 Vacuum technology
ISO/TC 113 Hydrometry
ISO/TC 113/SC 1 Velocity area methods
ISO/TC 113/SC 2 Flow measurement structures
ISO/TC 113/SC 5 Instruments, equipment and data management
ISO/TC 113/SC 6 Sediment transport
ISO/TC 113/SC 8 Ground water
ISO/TC 115 Pumps
ISO/TC 115/SC 1 Dimensions and technical specifications of pumps
ISO/TC 115/SC 2 Methods of measurement and testing
ISO/TC 115/SC 3 Installation and special application
ISO/TC 117 Fans
ISO/TC 117/WG 10 Vocabulary and definition of categories
ISO/TC 117/WG 11 Energy efficiency classification
ISO/TC 117/WG 12 System effect factors
ISO/TC 117/WG 13 Jet fans
ISO/TC 117/WG 7 Performance testing of fans
ISO/TC 117/WG 9 Air curtain units
ISO/TC 118 Compressors and pneumatic tools, machines and equipment
ISO/TC 118/SC 1 Process compressors
ISO/TC 118/SC 1/WG 1 Joint TC 118/SC 1-TC 67/SC 6 WG : Turbo compressors/expanders for petroleum, chemical and gas industry services
ISO/TC 118/SC 1/WG 2 Joint TC 118/SC 1-TC 67/SC 6 WG : Reciprocating compressors for petroleum, chemical and gas industry services
ISO/TC 118/SC 1/WG 3 Joint TC 118/SC 1-TC 67/SC 6 WG : Rotary type positive displacement compressors for petroleum, chemical and gas industry services
ISO/TC 118/SC 3 Pneumatic tools and machines
ISO/TC 118/SC 3/WG 3 Vibrations in hand-held tools
ISO/TC 118/SC 3/WG 4 Tightening of threaded fasteners
ISO/TC 118/SC 3/WG 7 Safety of fastener driving tools
ISO/TC 118/SC 4 Compressed air treatment technology
ISO/TC 118/SC 4/WG 1 Compressed air purity specification and compressed air treatment equipment
ISO/TC 118/SC 6 Air compressors and compressed air systems
ISO/TC 118/SC 6/WG 1 Performance specifications
ISO/TC 118/SC 6/WG 2 Safety
ISO/TC 118/SC 6/WG 4 Energy management
ISO/TC 119 Powder metallurgy
ISO/TC 119/SC 2 Sampling and testing methods for powders (including powders for hardmetals)
ISO/TC 119/SC 3 Sampling and testing methods for sintered metal materials (excluding hardmetals)
ISO/TC 119/SC 4 Sampling and testing methods for hardmetals
ISO/TC 12 Quantities and units
ISO/TC 120 Leather
ISO/TC 120/SC 1 Raw hides and skins, including pickled pelts
ISO/TC 120/SC 2 Tanned leather
ISO/TC 120/SC 3 Leather products
ISO/TC 121 Anaesthetic and respiratory equipment
ISO/TC 121/SC 1 Breathing attachments and anaesthetic machines
ISO/TC 121/SC 2 Airways and related equipment
ISO/TC 121/SC 3 Lung ventilators and related equipment
ISO/TC 121/SC 4 Terminology and semantics
ISO/TC 121/SC 6 Medical gas systems
ISO/TC 121/SC 8 Suction devices for hospital and emergency care use
ISO/TC 122 Packaging
ISO/TC 122/SC 3 Performance requirements and tests for means of packaging, packages and unit loads (as required by ISO/TC 122)
ISO/TC 122/SC 4 Packaging and the environment
ISO/TC 123 Plain bearings
ISO/TC 123/SC 2 Materials and lubricants, their properties, characteristics, test methods and testing conditions
ISO/TC 123/SC 3 Dimensions, tolerances and construction details
ISO/TC 123/SC 5 Quality analysis and assurance
ISO/TC 123/SC 6 Terms and common items
ISO/TC 126 Tobacco and tobacco products
ISO/TC 126/SC 1 Physical and dimensional tests
ISO/TC 126/SC 2 Leaf tobacco
ISO/TC 126/SC 3 Vape and vapour products
ISO/TC 127 Earth-moving machinery
ISO/TC 127/SC 1 Test methods relating to safety and machine performance
ISO/TC 127/SC 2 Safety, ergonomics and general requirements
ISO/TC 127/SC 3 Machine characteristics, electrical and electronic systems, operation and maintenance
ISO/TC 127/SC 4 Terminology, commercial nomenclature, classification and ratings
ISO/TC 130 Graphic technology
ISO/TC 131 Fluid power systems
ISO/TC 131/SC 1 Symbols, terminology and classifications
ISO/TC 131/SC 2 Pumps, motors and integral transmissions
ISO/TC 131/SC 3 Cylinders
ISO/TC 131/SC 4 Connectors and similar products and components
ISO/TC 131/SC 4/WG 4 Hydraulic and pneumatic quick-action couplings
ISO/TC 131/SC 4/WG 9 Pneumatic connectors
ISO/TC 131/SC 5 Control products and components
ISO/TC 131/SC 5/WG 2 Hydraulic control products
ISO/TC 131/SC 5/WG 3 Pneumatic control products
ISO/TC 131/SC 5/WG 5 Treatment of air
ISO/TC 131/SC 6 Contamination control
ISO/TC 131/SC 6/WG 1 Sampling, contamination analysis and reporting
ISO/TC 131/SC 6/WG 2 Filter and separator evaluation
ISO/TC 131/SC 6/WG 3 Component and system cleanliness
ISO/TC 131/SC 7 Sealing devices
ISO/TC 131/SC 8 Product testing
ISO/TC 131/SC 8/WG 1 Hydraulic component and system sound measurement
ISO/TC 131/SC 9 Installations and systems
ISO/TC 131/WG 1 Accumulators
ISO/TC 131/WG 4 Determination of the reliability of pneumatic components by testing
ISO/TC 132 Ferroalloys
ISO/TC 133 Clothing sizing systems - size designation, size measurement methods and digital fittings
ISO/TC 134 Fertilizers and soil conditioners
ISO/TC 135 Non-destructive testing
ISO/TC 135/SC 2 Surface methods
ISO/TC 135/SC 3 Ultrasonic testing
ISO/TC 135/SC 4 Eddy current testing
ISO/TC 135/SC 5 Radiographic testing
ISO/TC 135/SC 6 Leak testing
ISO/TC 135/SC 7 Personnel qualification
ISO/TC 135/SC 8 Thermographic testing
ISO/TC 135/SC 9 Acoustic emission testing
ISO/TC 136 Furniture
ISO/TC 137 Footwear sizing designations and marking systems
ISO/TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/TC 138/AG 0 Advisory group
ISO/TC 138/SC 1 Plastics pipes and fittings for soil, waste and drainage (including land drainage)
ISO/TC 138/SC 2 Plastics pipes and fittings for water supplies
ISO/TC 138/SC 2/WG 1 Plastics piping systems for hot and cold water applications
ISO/TC 138/SC 2/WG 2 Plastics piping systems for irrigation
ISO/TC 138/SC 2/WG 3 PVC piping systems for water supply
ISO/TC 138/SC 2/WG 4 PE piping systems for water supply
ISO/TC 138/SC 3 Plastics pipes and fittings for industrial applications
ISO/TC 138/SC 3/WG 7 Revision of industrial application standards
ISO/TC 138/SC 4 Plastics pipes and fittings for the supply of gaseous fuels
ISO/TC 138/SC 4/WG 1 Mechanical fittings for plastics pipe systems
ISO/TC 138/SC 4/WG 2 Fusion of PE Pipe Systems
ISO/TC 138/SC 4/WG 3 PE Pipe Systems
ISO/TC 138/SC 4/WG 5 Multi-layer Pipe Systems
ISO/TC 138/SC 4/WG 6 Butt Fusion Procedures
ISO/TC 138/SC 4/WG 7 Polyamid Pipe Systems
ISO/TC 138/SC 5 General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications
ISO/TC 138/SC 5/WG 17 Alternative test methods
ISO/TC 138/SC 5/WG 18 Test methods for joints with mechanical fittings
ISO/TC 138/SC 5/WG 20 Slow crack growth (SCG)
ISO/TC 138/SC 5/WG 5 Polyolefin pipes
ISO/TC 138/SC 6 Reinforced plastics pipes and fittings for all applications
ISO/TC 138/SC 6/WG 1 Methods of test
ISO/TC 138/SC 6/WG 3 Specifications for pipe systems
ISO/TC 138/SC 6/WG 5 Installation
ISO/TC 138/SC 7 Valves and auxiliary equipment of plastics materials
ISO/TC 138/SC 8 Rehabilitation of pipeline systems
ISO/TC 138/SC 8/WG 1 Classification and information on design and applications of plastics piping systems used for pipeline rehabilitation
ISO/TC 138/SC 8/WG 2 Plastics piping systems for rehabilitation of underground drainage and sewerage networks (non-pressure and pressure)
ISO/TC 138/SC 8/WG 3 Plastics piping systems for rehabilitation of underground water supply networks
ISO/TC 138/SC 8/WG 4 Plastics piping systems for rehabilitation of underground gas supply networks
ISO/TC 138/SC 8/WG 5 Plastics piping systems for trenchless replacement of underground pipeline networks
ISO/TC 138/WG 8 Basic geometrical characteristics of thermoplastics pipes
ISO/TC 14 Shafts for machinery and accessories
ISO/TC 142 Cleaning equipment for air and other gases
ISO/TC 142/TG 2 Air filters for residential applications
ISO/TC 142/WG 1 Terminology
ISO/TC 142/WG 10 Joint between ISO/TC 142 and ISO/TC 85/SC 2: Aerosol filters for nuclear applications
ISO/TC 142/WG 11 Portable room air cleaners for comfort applications
ISO/TC 142/WG 12 Sustainability of air cleaning equipment and media
ISO/TC 142/WG 2 UV-C technology
ISO/TC 142/WG 3 General ventilation filters
ISO/TC 142/WG 4 HEPA and ULPA filters
ISO/TC 142/WG 5 Dust collectors, droplet separators and purifiers
ISO/TC 142/WG 6 Flat sheet media testing
ISO/TC 142/WG 7 Durability of cleanable filter media used in dust removal applications
ISO/TC 142/WG 8 Cleaning equipment for air and other gases
ISO/TC 142/WG 9 Particulate air filter intake systems for rotary machinery and stationary internal combustion engines
ISO/TC 145 Graphical symbols
ISO/TC 145/SC 1 Public information symbols
ISO/TC 145/SC 2 Safety identification, signs, shapes, symbols and colours
ISO/TC 145/SC 3 Graphical symbols for use on equipment
ISO/TC 146 Air quality
ISO/TC 146/SC 1 Stationary source emissions
ISO/TC 146/SC 2 Workplace atmospheres
ISO/TC 146/SC 3 Ambient atmospheres
ISO/TC 146/SC 4 General aspects
ISO/TC 146/SC 5 Meteorology
ISO/TC 146/SC 6 Indoor air
ISO/TC 147 Water quality
ISO/TC 147/SC 1 Terminology
ISO/TC 147/SC 2 Physical, chemical and biochemical methods
ISO/TC 147/SC 3 Radioactivity measurements
ISO/TC 147/SC 4 Microbiological methods
ISO/TC 147/SC 5 Biological methods
ISO/TC 147/SC 6 Sampling (general methods)
ISO/TC 149 Cycles
ISO/TC 149/SC 1 Cycles and major sub-assemblies
ISO/TC 150 Implants for surgery
ISO/TC 150/SC 1 Materials
ISO/TC 150/SC 2 Cardiovascular implants and extracorporeal systems
ISO/TC 150/SC 4 Bone and joint replacements
ISO/TC 150/SC 5 Osteosynthesis and spinal devices
ISO/TC 153 Valves
ISO/TC 153/WG 1 Valve actuators and valve actuators attachments
ISO/TC 154 Processes, data elements and documents in commerce, industry and administration
ISO/TC 154/WG 6 Trusted eCommunications
ISO/TC 155 Nickel and nickel alloys
ISO/TC 156 Corrosion of metals and alloys
ISO/TC 157 Non-systemic contraceptives and STI barrier prophylactics
ISO/TC 158 Analysis of gases
ISO/TC 159 Ergonomics
ISO/TC 159/SC 1 General ergonomics principles
ISO/TC 159/SC 3 Anthropometry and biomechanics
ISO/TC 159/SC 4 Ergonomics of human-system interaction
ISO/TC 159/SC 5 Ergonomics of the physical environment
ISO/TC 160 Glass in building
ISO/TC 160/SC 1 Product considerations
ISO/TC 160/SC 2 Use considerations
ISO/TC 161 Controls and protective devices for gas and/or oil
ISO/TC 162 Doors and windows
ISO/TC 163 Thermal performance and energy use in the built environment
ISO/TC 163/SC 1 Test and measurement methods
ISO/TC 163/SC 1/WG 10 Air tightness of buildings
ISO/TC 163/SC 1/WG 15 Thermography of buildings and industrial installations
ISO/TC 163/SC 1/WG 16 In-situ measurement of thermal resistance and thermal transmittance of opaque building elements
ISO/TC 163/SC 1/WG 17 Solar heat gain coefficient of windows and doors
ISO/TC 163/SC 1/WG 7 Ageing of thermal insulation
ISO/TC 163/SC 1/WG 8 Moisture content and moisture permeability
ISO/TC 163/SC 2 Calculation methods
ISO/TC 163/SC 2/WG 15 Energy Performance calculation methods
ISO/TC 163/SC 2/WG 9 Calculation of heat transmission
ISO/TC 163/SC 3 Thermal insulation products
ISO/TC 163/SC 3/AHG 1 Insulation standards for warm climates
ISO/TC 163/SC 3/AHG 2 Format of standards
ISO/TC 163/SC 3/WG 10 Sheep wool thermal insulation products
ISO/TC 163/SC 3/WG 11 Vacuum insulation panels
ISO/TC 163/SC 3/WG 9 Exterior insulation and finish systems
ISO/TC 163/WG 3 Energy performance buildings
ISO/TC 163/WG 4 Joint between ISO/TC 163 and ISO/TC 205: Energy performance of buildings using holistic approach
ISO/TC 164 Mechanical testing of metals
ISO/TC 164/SC 1 Uniaxial testing
ISO/TC 164/SC 2 Ductility testing
ISO/TC 164/SC 3 Hardness testing
ISO/TC 164/SC 4 Toughness testing -- Fracture (F), Pendulum (P), Tear (T)
ISO/TC 164/SC 5 Fatigue testing
ISO/TC 165 Timber structures
ISO/TC 166 Ceramic ware, glassware and glass ceramic ware in contact with food
ISO/TC 168 Prosthetics and orthotics
ISO/TC 17 Steel
ISO/TC 17/SC 1 Methods of determination of chemical composition
ISO/TC 17/SC 10 Steel for pressure purposes
ISO/TC 17/SC 11 Steel castings
ISO/TC 17/SC 12 Continuous mill flat rolled products
ISO/TC 17/SC 15 Railway rails, rails fasteners, wheels and wheelsets
ISO/TC 17/SC 16 Steels for the reinforcement and prestressing of concrete
ISO/TC 17/SC 16/WG 10 Revision of ISO 15835
ISO/TC 17/SC 16/WG 8 Revision of ISO 15630
ISO/TC 17/SC 16/WG 9 Revision of ISO 10144
ISO/TC 17/SC 17 Steel wire rod and wire products
ISO/TC 17/SC 17/WG 3 Steel wire rods for conversion to wire
ISO/TC 17/SC 17/WG 9 Steel wire for bridge cables
ISO/TC 17/SC 19 Technical delivery conditions for steel tubes for pressure purposes
ISO/TC 17/SC 19/WG 1 Non-destructive testing
ISO/TC 17/SC 20 General technical delivery conditions, sampling and mechanical testing methods
ISO/TC 17/SC 3 Steels for structural purposes
ISO/TC 17/SC 4 Heat treatable and alloy steels
ISO/TC 17/SC 7 Methods of testing (other than mechanical tests and chemical analysis)
ISO/TC 17/SC 9 Tinplate and blackplate
ISO/TC 170 Surgical instruments
ISO/TC 171 Document management applications
ISO/TC 171/SC 1 Quality, preservation and integrity of information
ISO/TC 171/SC 2 Document file formats, EDMS systems and authenticity of information
ISO/TC 172 Optics and photonics
ISO/TC 172/SC 7 Ophthalmic optics and instruments
ISO/TC 172/SC 9 Electro-optical systems
ISO/TC 173 Assistive products for persons with disability
ISO/TC 173/SC 1 Wheelchairs
ISO/TC 173/SC 2 Classification and terminology
ISO/TC 173/SC 3 Aids for ostomy and incontinence
ISO/TC 173/SC 7 Accessible design
ISO/TC 174 Jewellery
ISO/TC 176 Quality management and quality assurance
ISO/TC 176/SC 1 Concepts and terminology
ISO/TC 176/SC 2 Quality systems
ISO/TC 176/SC 3 Supporting technologies
ISO/TC 176/WG 4 Qualty management systems - Application of ISO 9001 in local government
ISO/TC 178 Lifts, escalators and moving walks
ISO/TC 179 Masonry
ISO/TC 179/SC 1 Unreinforced masonry
ISO/TC 179/SC 2 Reinforced masonry
ISO/TC 179/SC 3 Test methods
ISO/TC 18 Zinc and zinc alloys
ISO/TC 180 Solar energy
ISO/TC 180/SC 1 Climate - Measurement and data
ISO/TC 180/SC 1/WG 1 Revision of ISO 9060
ISO/TC 180/SC 4 Systems - Thermal performance, reliability and durability
ISO/TC 180/WG 1 Nomenclature
ISO/TC 180/WG 3 Collector components and materials
ISO/TC 181 Safety of toys
ISO/TC 182 Geotechnics
ISO/TC 184 Automation systems and integration
ISO/TC 184/SC 1 Physical device control
ISO/TC 184/SC 4 Industrial data
ISO/TC 184/SC 5 Interoperability, integration, and architectures for enterprise systems and automation applications
ISO/TC 185 Safety devices for protection against excessive pressure
ISO/TC 185/WG 12 Bursting discs
ISO/TC 185/WG 13 Safety valves and bursting disc devices in combination
ISO/TC 185/WG 18 Performance testing
ISO/TC 186 Cutlery and table and decorative metal hollow-ware
ISO/TC 188 Small craft
ISO/TC 188/SC 1 Personal safety equipment
ISO/TC 188/SC 2 Engines and propulsion systems
ISO/TC 189 Ceramic tile
ISO/TC 190 Soil quality
ISO/TC 190/SC 1 Evaluation of criteria, terminology and codification
ISO/TC 190/SC 2 Sampling
ISO/TC 190/SC 3 Chemical methods and soil characteristics
ISO/TC 190/SC 4 Biological methods
ISO/TC 190/SC 7 Soil and site assessment
ISO/TC 192 Gas turbines
ISO/TC 192/JWG 15 Joint WG between ISO/TC 192 and IEC/TC 5/JMT 17 : Gas turbines - Noise
ISO/TC 192/WG 10 Gas turbine safety
ISO/TC 192/WG 11 Acceptance tests
ISO/TC 192/WG 12 Microturbines
ISO/TC 192/WG 13 Cogeneration systems
ISO/TC 192/WG 14 Acceptance tests - Combined Cycle Power Plants
ISO/TC 192/WG 4 Joint TC 192-TC 67/SC 6 WG : Gas turbine
ISO/TC 192/WG 8 Trend monitoring systems
ISO/TC 192/WG 9 Electric power applications
ISO/TC 193 Natural gas
ISO/TC 193/SC 1 Analysis of natural gas
ISO/TC 194 Biological and clinical evaluation of medical devices
ISO/TC 195 Building construction machinery and equipment
ISO/TC 195/SC 1 Machinery and equipment for concrete work
ISO/TC 197 Hydrogen technologies
ISO/TC 197/TAB 1 Technical Advisory Board
ISO/TC 197/WG 15 Gaseous hydrogen - Cylinders and tubes for stationary storage
ISO/TC 197/WG 17 Pressure swing adsorption system for hydrogen separation and purification
ISO/TC 197/WG 24 Gaseous hydrogen fueling stations – General requirements
ISO/TC 197/WG 5 Gaseous hydrogen land vehicle refuelling connection devices
ISO/TC 198 Sterilization of health care products
ISO/TC 199 Safety of machinery
ISO/TC 2 Fasteners
ISO/TC 2/SC 11 Fasteners with metric external thread
ISO/TC 2/SC 12 Fasteners with metric internal thread
ISO/TC 2/SC 13 Fasteners with non-metric thread
ISO/TC 2/SC 14 Surface coatings
ISO/TC 2/SC 7 Reference standards
ISO/TC 2/WG 13 Washer and non-threaded fasteners
ISO/TC 2/WG 17 Stainless steel fasteners
ISO/TC 20 Aircraft and space vehicles
ISO/TC 20/SC 1 Aerospace electrical requirements
ISO/TC 20/SC 10 Aerospace fluid systems and components
ISO/TC 20/SC 10/WG 6 Couplings for rigid pipe
ISO/TC 20/SC 10/WG 8 Hydraulic fluids and fluid contamination control
ISO/TC 20/SC 13 Space data and information transfer systems
ISO/TC 20/SC 14 Space systems and operations
ISO/TC 20/SC 16 Unmanned aircraft systems
ISO/TC 20/SC 4 Aerospace fastener systems
ISO/TC 20/SC 9 Air cargo and ground equipment
ISO/TC 201 Surface chemical analysis
ISO/TC 201/SC 1 Terminology
ISO/TC 201/SC 3 Data management and treatment
ISO/TC 201/SC 4 Depth profiling
ISO/TC 201/SC 6 Secondary ion mass spectrometry
ISO/TC 201/SC 7 Electron spectroscopies
ISO/TC 201/SC 8 Glow discharge spectroscopy
ISO/TC 201/SC 9 Scanning probe microscopy
ISO/TC 202 Microbeam analysis
ISO/TC 202/SC 2 Electron probe microanalysis
ISO/TC 202/SC 3 Analytical electron microscopy
ISO/TC 204 Intelligent transport systems
ISO/TC 205 Building environment design
ISO/TC 205/WG 1 General principles
ISO/TC 205/WG 2 Design of energy-efficient buildings
ISO/TC 205/WG 3 Building Automation and Control System (BACS) Design
ISO/TC 205/WG 5 Indoor thermal environment
ISO/TC 205/WG 7 Indoor visual environment
ISO/TC 205/WG 8 Radiant heating and cooling systems
ISO/TC 205/WG 9 Heating and cooling systems
ISO/TC 206 Fine ceramics
ISO/TC 207 Environmental management
ISO/TC 207/SC 1 Environmental management systems
ISO/TC 207/SC 2 Environmental auditing and related environmental investigations
ISO/TC 207/SC 3 Environmental labelling
ISO/TC 207/SC 4 Environmental performance evaluation
ISO/TC 207/SC 5 Life cycle assessment
ISO/TC 207/SC 7 Greenhouse gas management and related activities
ISO/TC 208 Thermal turbines for industrial application (steam turbines, gas expansion turbines)
ISO/TC 209 Cleanrooms and associated controlled environments
ISO/TC 21 Equipment for fire protection and fire fighting
ISO/TC 21/SC 11 Smoke and heat control systems and components
ISO/TC 21/SC 2 Manually transportable fire extinguishers
ISO/TC 21/SC 3 Fire detection and alarm systems
ISO/TC 21/SC 5 Fixed firefighting systems using water
ISO/TC 21/SC 6 Foam and powder media and firefighting systems using foam and powder
ISO/TC 21/SC 8 Gaseous media and firefighting systems using gas
ISO/TC 210 Quality management and corresponding general aspects for medical devices
ISO/TC 211 Geographic information/Geomatics
ISO/TC 212 Clinical laboratory testing and in vitro diagnostic test systems
ISO/TC 213 Dimensional and geometrical product specifications and verification
ISO/TC 213/AG 1 Strategic planning
ISO/TC 213/AG 12 Mathematical support group
ISO/TC 213/AG 13 Analysis of interdependence of specifications with respect to product function, verification and testing
ISO/TC 213/AG 2 Final Auditing Standards Team
ISO/TC 213/WG 10 Coordinate measuring machines
ISO/TC 213/WG 12 Size
ISO/TC 213/WG 14 Vertical GPS principles
ISO/TC 213/WG 15 GPS extraction and filtration techniques
ISO/TC 213/WG 16 Areal and profile surface texture
ISO/TC 213/WG 17 Facilitation of GPS implementation
ISO/TC 213/WG 18 Geometrical tolerancing
ISO/TC 213/WG 2 Datums and datum systems
ISO/TC 213/WG 4 Uncertainty of measurement and decision rules
ISO/TC 213/WG 6 General requirements for geometrical product specification (GPS) measuring equipment
ISO/TC 213/WG 9 Dimensional and geometrical tolerancing for castings
ISO/TC 214 Elevating work platforms
ISO/TC 215 Health informatics
ISO/TC 215/WG 1 Architecture, Frameworks and Models
ISO/TC 215/WG 2 Systems and Device Interoperability
ISO/TC 215/WG 3 Semantic content
ISO/TC 215/WG 4 Security, Safety and Privacy
ISO/TC 215/WG 6 Pharmacy and medicines business
ISO/TC 216 Footwear
ISO/TC 217 Cosmetics
ISO/TC 218 Timber
ISO/TC 219 Floor coverings
ISO/TC 22 Road vehicles
ISO/TC 22/SC 31 Data communication
ISO/TC 22/SC 31/JWG 1 Joint ISO/TC 22/SC 31 - IEC/TC 69: Vehicle to grid communication interface (V2G CI)
ISO/TC 22/SC 31/WG 2 Vehicle diagnostic protocols
ISO/TC 22/SC 31/WG 3 In-vehicle networks
ISO/TC 22/SC 31/WG 4 Network applications
ISO/TC 22/SC 31/WG 5 Test equipment/Data eXchange Formats
ISO/TC 22/SC 32 Electrical and electronic components and general system aspects
ISO/TC 22/SC 32/WG 1 Ignition Equipment
ISO/TC 22/SC 32/WG 2 Environmental conditions
ISO/TC 22/SC 32/WG 3 Electromagnetic compatibility
ISO/TC 22/SC 32/WG 4 Automotive electrical cables
ISO/TC 22/SC 32/WG 5 Fuses and circuit breakers
ISO/TC 22/SC 32/WG 6 On-board electrical connections
ISO/TC 22/SC 32/WG 8 Functional safety
ISO/TC 22/SC 32/WG 9 Electrical connections between towing and towed vehicles
ISO/TC 22/SC 33 Vehicle dynamics and chassis components
ISO/TC 22/SC 33/WG 4 Function and components of braking systems
ISO/TC 22/SC 33/WG 7 TPMS
ISO/TC 22/SC 34 Propulsion, powertrain and powertrain fluids
ISO/TC 22/SC 35 Lighting and visibility
ISO/TC 22/SC 35/WG 1 Lighting and light-signalling
ISO/TC 22/SC 35/WG 2 Safety glazing
ISO/TC 22/SC 35/WG 3 Visibility
ISO/TC 22/SC 36 Safety and impact testing
ISO/TC 22/SC 36/WG 1 Car collision test procedures
ISO/TC 22/SC 36/WG 2 Child restraint systems
ISO/TC 22/SC 36/WG 3 Instrumentation
ISO/TC 22/SC 36/WG 4 Virtual testing
ISO/TC 22/SC 36/WG 5 Anthropomorphic test devices
ISO/TC 22/SC 36/WG 6 Performance criteria expressed in biomechanical terms
ISO/TC 22/SC 36/WG 7 Traffic accident analysis methodology
ISO/TC 22/SC 37 Electrically propelled vehicles
ISO/TC 22/SC 38 Motorcycles and mopeds
ISO/TC 22/SC 39 Ergonomics
ISO/TC 22/SC 39/WG 3 Controls, displays, and tell-tale localization
ISO/TC 22/SC 39/WG 5 Symbols
ISO/TC 22/SC 39/WG 7 Hand reach and R and H point determination
ISO/TC 22/SC 39/WG 8 TICS on-board-MMI
ISO/TC 22/SC 40 Specific aspects for light and heavy commercial vehicles, busses and trailers
ISO/TC 22/SC 41 Specific aspects for gaseous fuels
ISO/TC 220 Cryogenic vessels
ISO/TC 221 Geosynthetics
ISO/TC 221/WG 3 Mechanical properties
ISO/TC 222 Personal financial planning
ISO/TC 224 Service activities relating to drinking water supply systems and wastewater systems - Quality criteria of the service and performance indicators
ISO/TC 225 Market, opinion and social research
ISO/TC 227 Springs
ISO/TC 228 Tourism and related services
ISO/TC 228/WG 1 Diving services
ISO/TC 229 Nanotechnologies
ISO/TC 23 Tractors and machinery for agriculture and forestry
ISO/TC 23/SC 13 Powered lawn and garden equipment
ISO/TC 23/SC 14 Operator controls, operator symbols and other displays, operator manuals
ISO/TC 23/SC 15 Machinery for forestry
ISO/TC 23/SC 17 Manually portable forest machinery
ISO/TC 23/SC 18 Irrigation and drainage equipment and systems
ISO/TC 23/SC 19 Agricultural electronics
ISO/TC 23/SC 2 Common tests
ISO/TC 23/SC 3 Safety and comfort
ISO/TC 23/SC 4 Tractors
ISO/TC 23/SC 6 Equipment for crop protection
ISO/TC 23/SC 7 Equipment for harvesting and conservation
ISO/TC 232 Learning services outside formal education
ISO/TC 234 Fisheries and aquaculture
ISO/TC 238 Solid biofuels
ISO/TC 238/WG 1 Terminology
ISO/TC 238/WG 2 Fuel specifications and classes
ISO/TC 238/WG 4 Physical and mechanical test methods
ISO/TC 238/WG 5 Chemical test methods
ISO/TC 238/WG 6 Sampling and sample preparation
ISO/TC 238/WG 7 Safety of solid biofuels
ISO/TC 241 Road traffic safety management systems
ISO/TC 242 Energy Management
ISO/TC 242/CAG Chairman advisory group
ISO/TC 242/TG 1 Task Group MSS
ISO/TC 242/WG 1 Energy Management
ISO/TC 242/WG 2 Energy performance metrics
ISO/TC 242/WG 3 Joint TC 242 - TC 257 WG: Measurement & verification of organizational energy performance - General principles and guidelines
ISO/TC 242/WG 4 Opportunities for Improvement
ISO/TC 242/WG 5 Energy Services
ISO/TC 242/WG 6 Data for Energy Management Systems
ISO/TC 244 Industrial furnaces and associated processing equipment
ISO/TC 244/WG 1 General safety requirements
ISO/TC 244/WG 2 Safety requirements for combustion and fuel handling systems
ISO/TC 244/WG 3 Method of energy balance and efficiency
ISO/TC 244/WG 4 Vocabulary
ISO/TC 244/WG 5 Protective system
ISO/TC 244/WG 6 Safety requirements for generation and use of protective and reactive gases
ISO/TC 244/WG 7 Requirements for machinery and equipment for production of steel by electric arc furnaces
ISO/TC 249 Traditional chinese medicine
ISO/TC 25 Cast irons and pig irons
ISO/TC 251 Asset management
ISO/TC 254 Safety of amusement rides and amusement devices
ISO/TC 255 Biogas
ISO/TC 255/WG 1 Terms, definitions and classification scheme for the production, conditioning and utilization of biogas
ISO/TC 257 Evaluation of energy savings
ISO/TC 257/JWG 4 Joint TC 257-TC 242 WG: General calculation methods on energy efficiency and savings for organisations and other enterprises
ISO/TC 257/WG 1 Definition of a methodological framework applicable to calculation and reporting on energy savings
ISO/TC 257/WG 2 General calculation methods on energy efficiency and savings for countries, regions or cities
ISO/TC 257/WG 3 General technical rules for measurement, calculation and verification of energy savings of projects
ISO/TC 258 Project, programme and portfolio management
ISO/TC 26 Copper and copper alloys
ISO/TC 260 Human resource management
ISO/TC 261 Additive manufacturing
ISO/TC 262 Risk management
ISO/TC 264 Fireworks
ISO/TC 265 Carbon dioxide capture, transportation, and geological storage
ISO/TC 267 Facilities management
ISO/TC 269 Railway applications
ISO/TC 269/SC 1 Infrastructure
ISO/TC 269/SC 2 Rolling stock
ISO/TC 269/SC 3 Operations and services
ISO/TC 27 Solid mineral fuels
ISO/TC 27/SC 1 Coal preparation: Terminology and performance
ISO/TC 27/SC 3 Coke
ISO/TC 27/SC 4 Sampling
ISO/TC 27/SC 5 Methods of analysis
ISO/TC 270 Plastics and rubber machines
ISO/TC 272 Forensic sciences
ISO/TC 274 Light and lighting
ISO/TC 275 Sludge recovery, recycling, treatment and disposal
ISO/TC 276 Biotechnology
ISO/TC 279 Innovation management
ISO/TC 28 Petroleum products and related products of synthetic or biological origin
ISO/TC 28/SC 2 Measurement of petroleum and related products
ISO/TC 28/SC 4 Classifications and specifications
ISO/TC 28/SC 5 Measurement of refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels
ISO/TC 28/SC 7 Liquid Biofuels
ISO/TC 282 Water reuse
ISO/TC 289 Brand evaluation
ISO/TC 29 Small tools
ISO/TC 29/SC 10 Assembly tools for screws and nuts, pliers and nippers
ISO/TC 29/SC 2 Holding tools, adaptive items and interfaces
ISO/TC 29/SC 5 Grinding wheels and abrasives
ISO/TC 29/SC 8 Tools for pressing and moulding
ISO/TC 29/SC 9 Tools with defined cutting edges, cutting items
ISO/TC 290 Online reputation
ISO/TC 291 Domestic gas cooking appliances
ISO/TC 292 Security and resilience
ISO/TC 293 Feed machinery
ISO/TC 296 Bamboo and rattan
ISO/TC 297 Waste management, recycling and road operation service
ISO/TC 298 Rare earth
ISO/TC 299 Robotics
ISO/TC 30 Measurement of fluid flow in closed conduits
ISO/TC 30/SC 2 Pressure differential devices
ISO/TC 30/SC 5 Velocity and mass methods
ISO/TC 30/SC 7 Volume methods including water meters
ISO/TC 300 Solid recovered fuels
ISO/TC 300/WG 2 Specification and classes
ISO/TC 300/WG 3 Sampling and sample reduction
ISO/TC 300/WG 4 Physical and mechanical tests
ISO/TC 300/WG 5 Chemical tests and determination of biomass content
ISO/TC 300/WG 6 Safety of solid recovered fuels
ISO/TC 301 Energy management and energy savings
ISO/TC 301/CAG Chairman Advisory Group
ISO/TC 301/TG 1 NWIP Task Group
ISO/TC 301/TG 2 Communication Task Group
ISO/TC 301/TG 3 Terminology Task group
ISO/TC 301/WG 1 Energy management
ISO/TC 301/WG 10 Energy savings in organizations
ISO/TC 301/WG 11 Economics and financial evaluation
ISO/TC 301/WG 12 Energy savings evaluators
ISO/TC 301/WG 13 Evaluation of energy savings of thermal power plant
ISO/TC 301/WG 2 Energy performance metrics
ISO/TC 301/WG 3 Measurement and verification of organizational energy performance -- General principles and guidelines
ISO/TC 301/WG 4 Opportunities for improvement
ISO/TC 301/WG 5 Energy services
ISO/TC 301/WG 6 Data for energy management systems
ISO/TC 301/WG 7 Methodological framework of calculation and reporting on energy savings
ISO/TC 301/WG 8 Energy savings in regions
ISO/TC 301/WG 9 Energy savings of projects
ISO/TC 306 Foundry machinery
ISO/TC 31 Tyres, rims and valves
ISO/TC 31/SC 10 Cycle, moped, motorcycle tyres and rims
ISO/TC 31/SC 3 Passenger car tyres and rims
ISO/TC 31/SC 3/WG 19 Runflat tyre system capabilities
ISO/TC 31/SC 4 Truck and bus tyres and rims
ISO/TC 31/SC 5 Agricultural tyres and rims
ISO/TC 31/SC 6 Off-the-road tyres and rims
ISO/TC 31/SC 7 Industrial tyres and rims
ISO/TC 31/SC 9 Valves for tube and tubeless tyres
ISO/TC 31/WG 8 Methods for measuring snow and ice grip performance
ISO/TC 33 Refractories
ISO/TC 34 Food products
ISO/TC 34/SC 10 Animal feeding stuffs
ISO/TC 34/SC 11 Animal and vegetable fats and oils
ISO/TC 34/SC 12 Sensory analysis
ISO/TC 34/SC 15 Coffee
ISO/TC 34/SC 16 Horizontal methods for molecular biomarker analysis
ISO/TC 34/SC 17 Management systems for food safety
ISO/TC 34/SC 2 Oleaginous seeds and fruits and oilseed meals
ISO/TC 34/SC 3 Fruits and vegetables and their derived products
ISO/TC 34/SC 4 Cereals and pulses
ISO/TC 34/SC 5 Milk and milk products
ISO/TC 34/SC 6 Meat, poultry, fish, eggs and their products
ISO/TC 34/SC 7 Spices, culinary herbs and condiments
ISO/TC 34/SC 9 Microbiology
ISO/TC 35 Paints and varnishes
ISO/TC 35/SC 10 Test methods for binders for paints and varnishes
ISO/TC 35/SC 12 Preparation of steel substrates before application of paints and related products
ISO/TC 35/SC 14 Protective paint systems for steel structures
ISO/TC 35/SC 9 General test methods for paints and varnishes
ISO/TC 37 Terminology and other language and content resources
ISO/TC 37/SC 1 Principles and methods
ISO/TC 37/SC 2 Terminographical and lexicographical working methods
ISO/TC 37/SC 3 Systems to manage terminology, knowledge and content
ISO/TC 37/SC 4 Language resource management
ISO/TC 37/SC 5 Translation, interpreting and related technology
ISO/TC 38 Textiles
ISO/TC 38/SC 1 Tests for coloured textiles and colorants
ISO/TC 38/SC 2 Cleansing, finishing and water resistance tests
ISO/TC 38/SC 20 Fabric descriptions
ISO/TC 38/SC 23 Fibres and yarns
ISO/TC 38/SC 23/WG 5 Fibres - Natural proteins
ISO/TC 38/SC 24 Conditioning atmospheres and physical tests for textile fabrics
ISO/TC 38/WG 22 Composition and chemical testing
ISO/TC 39 Machine tools
ISO/TC 39/SC 10 Safety
ISO/TC 39/SC 10/WG 1 Metal forming machines
ISO/TC 39/SC 2 Test conditions for metal cutting machine tools
ISO/TC 39/SC 4 Woodworking machines
ISO/TC 39/SC 6 Noise of machine tools
ISO/TC 39/SC 8 Work holding spindles and chucks
ISO/TC 39/WG 12 Environmental evaluation of machine tools
ISO/TC 4 Rolling bearings
ISO/TC 4/SC 11 Linear motion rolling bearings
ISO/TC 4/SC 4 Tolerances, tolerance definitions and symbols (including GPS)
ISO/TC 4/SC 5 Needle, cylindrical and spherical roller bearings
ISO/TC 4/SC 6 Insert bearings
ISO/TC 4/SC 7 Spherical plain bearings
ISO/TC 4/SC 8 Load ratings and life
ISO/TC 4/SC 9 Tapered roller bearings
ISO/TC 41 Pulleys and belts (including veebelts)
ISO/TC 41/SC 1 Friction
ISO/TC 41/SC 3 Conveyor belts
ISO/TC 41/SC 4 Synchronous belt drives
ISO/TC 42 Photography
ISO/TC 43 Acoustics
ISO/TC 43/SC 1 Noise
ISO/TC 43/SC 2 Building acoustics
ISO/TC 43/SC 2/WG 29 Acoustic classification scheme for buildings
ISO/TC 43/SC 3 Underwater acoustics
ISO/TC 44 Welding and allied processes
ISO/TC 44/SC 10 Quality management in the field of welding
ISO/TC 44/SC 11 Qualification requirements for welding and allied processes personnel
ISO/TC 44/SC 12 Soldering materials
ISO/TC 44/SC 3 Welding consumables
ISO/TC 44/SC 5 Testing and inspection of welds
ISO/TC 44/SC 6 Resistance welding and allied mechanical joining
ISO/TC 44/SC 7 Representation and terms
ISO/TC 44/SC 8 Equipment for gas welding, cutting and allied processes
ISO/TC 44/SC 9 Health and safety
ISO/TC 45 Rubber and rubber products
ISO/TC 45/SC 1 Rubber and plastics hoses and hose assemblies
ISO/TC 45/SC 2 Testing and analysis
ISO/TC 45/SC 2/WG 5 Chemical tests
ISO/TC 45/SC 3 Raw materials (including latex) for use in the rubber industry
ISO/TC 45/SC 4 Products (other than hoses)
ISO/TC 45/SC 4/WG 2 Rubber seals
ISO/TC 46 Information and documentation
ISO/TC 46/SC 10 Requirements for document storage and conditions for preservation
ISO/TC 46/SC 11 Archives/records management
ISO/TC 46/SC 4 Technical interoperability
ISO/TC 46/SC 8 Quality - Statistics and performance evaluation
ISO/TC 46/SC 9 Identification and description
ISO/TC 47 Chemistry
ISO/TC 47/SC 1 General methods
ISO/TC 48 Laboratory equipment
ISO/TC 48/SC 4 Density measuring instruments
ISO/TC 48/SC 5 Quality of glassware
ISO/TC 5 Ferrous metal pipes and metallic fittings
ISO/TC 5/SC 1 Steel tubes
ISO/TC 5/SC 10 Metallic flanges and their joints
ISO/TC 5/SC 11 Metal hoses and expansion joints
ISO/TC 5/SC 2 Cast iron pipes, fittings and their joints
ISO/TC 5/SC 5 Threaded fittings, solder fittings, welding fittings, pipe threads, thread gauges
ISO/TC 51 Pallets for unit load method of materials handling
ISO/TC 52 Light gauge metal containers
ISO/TC 52/SC 6 Aerosol containers
ISO/TC 54 Essential oils
ISO/TC 58 Gas cylinders
ISO/TC 58/SC 2 Cylinder fittings
ISO/TC 58/SC 3 Cylinder design
ISO/TC 58/SC 3/WG 27 Composite cylinders
ISO/TC 58/SC 4 Operational requirements for gas cylinders
ISO/TC 59 Buildings and civil engineering works
ISO/TC 59/SC 13 Organization of information about construction works
ISO/TC 59/SC 14 Design life
ISO/TC 59/SC 15 Performance description of houses
ISO/TC 59/SC 16 Accessibility and usability of the built environment
ISO/TC 59/SC 17 Sustainability in buildings and civil engineering works
ISO/TC 59/SC 18 Construction procurement
ISO/TC 59/SC 2 Terminology and harmonization of languages
ISO/TC 59/SC 3 Functional/user requirements and performance in building construction
ISO/TC 59/SC 8 Sealants
ISO/TC 6 Paper, board and pulps
ISO/TC 6/SC 2 Test methods and quality specifications for paper and board
ISO/TC 60 Gears
ISO/TC 60/SC 1 Nomenclature and wormgearing
ISO/TC 60/SC 1/WG 4 Terminology and notation of gears
ISO/TC 60/SC 1/WG 7 Worm gears
ISO/TC 60/SC 2 Gear capacity calculation
ISO/TC 61 Plastics
ISO/TC 61/SC 1 Terminology
ISO/TC 61/SC 1/WG 1 Terms and definitions
ISO/TC 61/SC 1/WG 3 Symbols
ISO/TC 61/SC 10 Cellular plastics
ISO/TC 61/SC 10/WG 10 Joint TC 163/SC 3-TC 61/SC 10 WG : Plastic insulation
ISO/TC 61/SC 10/WG 11 Physical and chemical properties
ISO/TC 61/SC 10/WG 12 Mechanical and endurance properties
ISO/TC 61/SC 10/WG 14 Products and materials
ISO/TC 61/SC 11 Products
ISO/TC 61/SC 11/WG 11 Wood-plastic composites
ISO/TC 61/SC 11/WG 2 Decorative laminates and solid surfacing materials
ISO/TC 61/SC 11/WG 3 Plastics films and sheeting
ISO/TC 61/SC 11/WG 5 Polymeric adhesives
ISO/TC 61/SC 12 Thermosetting materials
ISO/TC 61/SC 12/WG 2 Phenolic resins
ISO/TC 61/SC 12/WG 5 Unsaturated polyesters, epoxy resins and other resins
ISO/TC 61/SC 12/WG 6 Polyurethane raw materials
ISO/TC 61/SC 13 Composites and reinforcement fibres
ISO/TC 61/SC 13/WG 1 Reinforcements and reinforcement products
ISO/TC 61/SC 13/WG 2 Laminates and moulding compounds
ISO/TC 61/SC 2 Mechanical behavior
ISO/TC 61/SC 2/WG 1 Static properties
ISO/TC 61/SC 2/WG 2 Hardness and surface properties
ISO/TC 61/SC 2/WG 3 Impact and high speed properties
ISO/TC 61/SC 2/WG 5 Temperature dependent properties
ISO/TC 61/SC 2/WG 6 Dimensions of test specimens
ISO/TC 61/SC 2/WG 7 Fracture and fatigue properties
ISO/TC 61/SC 2/WG 8 Forms of data presentation
ISO/TC 61/SC 4 Burning behaviour
ISO/TC 61/SC 4/WG 10 Lighters
ISO/TC 61/SC 4/WG 11 Development of Technical Report ISO/TR 20118
ISO/TC 61/SC 4/WG 2 Smoke opacity and corrosivity
ISO/TC 61/SC 4/WG 8 Ignitability and fire growth
ISO/TC 61/SC 4/WG 9 Composites and semi-finished products
ISO/TC 61/SC 5 Physical-chemical properties
ISO/TC 61/SC 5/WG 11 Analytical methods
ISO/TC 61/SC 5/WG 22 Biodegradability
ISO/TC 61/SC 5/WG 23 Biobased plastics
ISO/TC 61/SC 5/WG 5 Viscosity
ISO/TC 61/SC 5/WG 8 Thermal analysis
ISO/TC 61/SC 5/WG 9 Rheology
ISO/TC 61/SC 6 Ageing, chemical and environmental resistance
ISO/TC 61/SC 6/WG 2 Exposure to light
ISO/TC 61/SC 6/WG 3 Various exposures
ISO/TC 61/SC 6/WG 7 Basic standards
ISO/TC 61/SC 9 Thermoplastic materials
ISO/TC 61/SC 9/WG 14 Polymer dispersions
ISO/TC 61/SC 9/WG 15 Polycarbonate
ISO/TC 61/SC 9/WG 18 Preparation of test specimens
ISO/TC 61/SC 9/WG 20 Poly(vinyl chloride)
ISO/TC 61/SC 9/WG 21 Polyoxymethylene
ISO/TC 61/SC 9/WG 22 PTFE raw materials and products
ISO/TC 61/SC 9/WG 23 Polymers and copolymers of vinyl alcohol
ISO/TC 61/SC 9/WG 24 Polyphenylene ethers
ISO/TC 61/SC 9/WG 26 Thermoplastic elastomers
ISO/TC 61/SC 9/WG 6 Polyolefins
ISO/TC 61/SC 9/WG 7 Styrene polymers
ISO/TC 61/SC 9/WG 8 Polyamides
ISO/TC 63 Glass containers
ISO/TC 67 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
ISO/TC 67/SC 2 Pipeline transportation systems
ISO/TC 67/SC 3 Drilling and completion fluids, and well cements
ISO/TC 67/SC 4 Drilling and production equipment
ISO/TC 67/SC 5 Casing, tubing and drill pipe
ISO/TC 67/SC 6 Processing equipment and systems
ISO/TC 67/SC 7 Offshore structures
ISO/TC 67/SC 8 Arctic operations
ISO/TC 67/SC 9 Liquefied natural gas installations and equipment
ISO/TC 67/WG 5 Aluminium alloy pipes
ISO/TC 68 Financial services
ISO/TC 68/SC 2 Financial Services, security
ISO/TC 68/SC 4 Securities and related financial instruments
ISO/TC 68/SC 7 Core banking
ISO/TC 69 Applications of statistical methods
ISO/TC 69/SC 1 Terminology and symbols
ISO/TC 69/SC 4 Applications of statistical methods in product and process management
ISO/TC 69/SC 5 Acceptance sampling
ISO/TC 69/SC 6 Measurement methods and results
ISO/TC 69/SC 7 Applications of statistical and related techniques for the implementation of Six Sigma
ISO/TC 69/SC 8 Application of statistical and related methodology for new technology and product development
ISO/TC 70 Internal combustion engines
ISO/TC 70/SC 7 Tests for lubricating oil filters
ISO/TC 70/SC 8 Exhaust gas emission measurement
ISO/TC 70/WG 10 Reciprocating internal combustion engine driven generating sets
ISO/TC 70/WG 13 Air-borne noise
ISO/TC 70/WG 14 Requirements and tests for low-power generating sets
ISO/TC 70/WG 2 Terms and definitions
ISO/TC 71 Concrete, reinforced concrete and pre-stressed concrete
ISO/TC 71/SC 1 Test methods for concrete
ISO/TC 71/SC 3 Concrete production and execution of concrete structures
ISO/TC 71/SC 4 Performance requirements for structural concrete
ISO/TC 72 Textile machinery and accessories
ISO/TC 72/SC 1 Spinning preparatory, spinning, twisting and winding machinery and accessories
ISO/TC 72/SC 3 Machinery for fabric manufacturing including preparatory machinery and accessories
ISO/TC 72/SC 4 Dyeing and finishing machinery and accessories
ISO/TC 72/SC 5 Industrial laundry and dry-cleaning machinery and accessories
ISO/TC 72/SC 8 Safety requirements for textile machinery
ISO/TC 74 Cement and lime
ISO/TC 76 Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use
ISO/TC 79 Light metals and their alloys
ISO/TC 79/SC 11 Titanium
ISO/TC 79/SC 2 Organic and anodic oxidation coatings on aluminium
ISO/TC 79/SC 4 Unalloyed (refined) aluminium ingots
ISO/TC 79/SC 5 Magnesium and alloys of cast or wrought magnesium
ISO/TC 79/SC 6 Wrought aluminium and aluminium alloys
ISO/TC 79/SC 7 Aluminium and cast aluminium alloys
ISO/TC 79/SC 9 Symbolization
ISO/TC 8 Ships and marine technology
ISO/TC 8/SC 1 Lifesaving and fire protection
ISO/TC 8/SC 11 Intermodal and Short Sea Shipping
ISO/TC 8/SC 12 Ships and marine technology - Large yachts
ISO/TC 8/SC 2 Marine environment protection
ISO/TC 8/SC 3 Piping and machinery
ISO/TC 8/SC 4 Outfitting and deck machinery
ISO/TC 8/SC 6 Navigation and ship operations
ISO/TC 8/SC 7 Inland navigation vessels
ISO/TC 8/SC 8 Ship design
ISO/TC 81 Common names for pesticides and other agrochemicals
ISO/TC 83 Sports and other recreational facilities and equipment
ISO/TC 83/SC 4 Snowsports equipment
ISO/TC 83/SC 5 Ice hockey equipment and facilities
ISO/TC 83/SC 6 Martial arts
ISO/TC 84 Devices for administration of medicinal products and catheters
ISO/TC 85 Nuclear energy, nuclear technologies, and radiological protection
ISO/TC 85/SC 2 Radiological protection
ISO/TC 85/SC 5 Nuclear installations, processes and technologies
ISO/TC 85/SC 6 Reactor technology
ISO/TC 86 Refrigeration and air-conditioning
ISO/TC 86/SC 1 Safety and environmental requirements for refrigerating systems
ISO/TC 86/SC 1/WG 1 Safety and environmental requirements for refrigerating systems and heat pumps
ISO/TC 86/SC 4 Testing and rating of refrigerant compressors
ISO/TC 86/SC 6 Testing and rating of air-conditioners and heat pumps
ISO/TC 86/SC 6/WG 1 Air-source air-conditioners and heat pumps
ISO/TC 86/SC 6/WG 10 Energy recovery ventilators
ISO/TC 86/SC 6/WG 12 Heat pump water heaters
ISO/TC 86/SC 6/WG 3 Water and brine source heat pumps and air-conditioners
ISO/TC 86/SC 7 Testing and rating of commercial refrigerated display cabinets
ISO/TC 86/SC 8 Refrigerants and refrigeration lubricants
ISO/TC 86/SC 8/WG 5 Refrigerants - Designation and safety classification
ISO/TC 87 Cork
ISO/TC 89 Wood-based panels
ISO/TC 89/SC 1 Fibre boards
ISO/TC 89/SC 2 Particle boards
ISO/TC 89/SC 3 Plywood
ISO/TC 91 Surface active agents
ISO/TC 92 Fire safety
ISO/TC 92/SC 1 Fire initiation and growth
ISO/TC 92/SC 2 Fire containment
ISO/TC 92/SC 3 Fire threat to people and environment
ISO/TC 92/SC 4 Fire safety engineering
ISO/TC 93 Starch (including derivatives and by-products)
ISO/TC 94 Personal safety -- Protective clothing and equipment
ISO/TC 94/SC 1 Head protection
ISO/TC 94/SC 12 Hearing protection
ISO/TC 94/SC 13 Protective clothing
ISO/TC 94/SC 14 Firefighters' personal equipment
ISO/TC 94/SC 15 Respiratory protective devices
ISO/TC 94/SC 3 Foot protection
ISO/TC 94/SC 4 Personal equipment for protection against falls
ISO/TC 94/SC 6 Eye and face protection
ISO/TC 96 Cranes
ISO/TC 96/SC 10 Design principles and requirements
ISO/TC 96/SC 2 Terminology
ISO/TC 96/SC 3 Selection of wire ropes
ISO/TC 96/SC 4 Test methods
ISO/TC 96/SC 5 Use, operation and maintenance
ISO/TC 96/SC 6 Mobile cranes
ISO/TC 96/SC 7 Tower cranes
ISO/TC 96/SC 8 Jib cranes
ISO/TC 96/SC 9 Bridge and gantry cranes
ISO/TC 98 Bases for design of structures
ISO/TC 98/SC 1 Terminology and symbols
ISO/TC 98/SC 2 Reliability of structures
ISO/TC 98/SC 3 Loads, forces and other actions
IULTCS International Union of Leather Technologists and Chemists Societies

Questo sito si serve dei cookie per fornire servizi. Utilizzando questo sito acconsenti all'utilizzo dei cookie. Clicca qui per ulteriori informazioni.