X
Sito Internet: www.cuna-tech.org/
Presidente: Filippo D’Aprile
Direttore: Gian Maurizio Rodella
Corso Galileo Ferraris 61 - 10128 Torino - Tel. 0115621149 - Telefax 011532143
CAMPO DI ATTIVITÀ
Autoveicoli - Ciclomotori - Motoveicoli - Macchine agricole - Macchine operatrici - Veicoli rimorchiati - Prodotti affini e connessi (motori e propulsori in genere, gruppi meccanici, pneumatici, combustibili, lubrificanti, componenti ed accessori, materiali, ecc.)
TC CEN DI COMPETENZA | |
CEN/TC 144 | Tractors and machinery for agriculture and forestry |
CEN/TC 144/WG 1 | General safety requirements |
CEN/TC 144/WG 2 | Tractors and self propelled machines |
CEN/TC 144/WG 3 | Mobile machines and trailers |
CEN/TC 144/WG 4 | Portable machines and pedestrian controlled machines |
CEN/TC 144/WG 5 | Stationary equipment |
CEN/TC 144/WG 6 | Manually portable forestry machinery |
CEN/TC 144/WG 7 | Powered Lawn and Garden equipment |
CEN/TC 144/WG 8 | Forestry machinery |
CEN/TC 144/WG 9 | Compact tool carriers for agriculture and forestry |
CEN/TC 151/WG 1 | Earth-moving machinery - Safety |
CEN/TC 245 | Leisure accommodation vehicles |
CEN/TC 245/WG 6 | Technical and habitation requirements for Leisure Accommodation Vehicles |
CEN/TC 270 | Internal combustion engines |
CEN/TC 301 | Road vehicles |
CEN/TC 301/WG 11 | Safety of roller brake testers |
CEN/TC 301/WG 15 | Safety of machines for mounting and demounting vehicles tyres |
CEN/TC 301/WG 16 | Performance assessment of the Portable Emission Measuring Systems (PEMS) |
CEN/TC 301/WG 17 | Plastics recycling and sustainability for road vehicles |
CEN/TC 301/WG 18 | Electric vehicles batteries |
CEN/TC 301/WG 6 | M/421 Vehicle OBD, repair and maintenance information |
CEN/TC 301/WG 7 | Supplementary grip devices |
CEN/TC 334 | Irrigation techniques |
CEN/TC 337 | Road operation equipment and products |
CEN/TC 337/WG 1 | Winter service equipment and products |
CEN/TC 337/WG 2 | Road service area maintenance equipment |
CEN/TC 337/WG 3 | Interface between vehicles and equipment |
CEN/TC 337/WG 4 | Road surface cleaning equipment |
CEN/TC 354 | Light motorized vehicles for the transportation of persons and goods and related facilities and not subject to type-approval for on-road use |
CEN/TC 354/WG 1 | Single- track two wheeled motor vehicles |
CEN/TC 354/WG 2 | All Terrain Vehicles (ATV s -Quads) and Side by Side Vehicles - Safety requirements and test methods |
CEN/TC 354/WG 3 | Karts |
CEN/TC 354/WG 4 | Light electric vehicles and self-balancing vehicles |
TC ISO DI COMPETENZA | |
ISO/TC 127 | Earth-moving machinery |
ISO/TC 127/SC 1 | Test methods relating to safety and machine performance |
ISO/TC 127/SC 1/WG 5 | Visibility |
ISO/TC 127/SC 2 | Safety, ergonomics and general requirements |
ISO/TC 127/SC 2/WG 30 | Revision of 6683 |
ISO/TC 127/SC 3 | Machine characteristics, electrical and electronic systems, operation and maintenance |
ISO/TC 127/SC 4 | Terminology, commercial nomenclature, classification and ratings |
ISO/TC 127/SC 4/WG 5 | Revision of ISO 6165 |
ISO/TC 22 | Road vehicles |
ISO/TC 22/SAG | Strategic advisory group |
ISO/TC 22/SC 31 | Data communication |
ISO/TC 22/SC 31/JWG 1 | Joint ISO/TC 22/SC 31 - IEC/TC 69 WG: Vehicle to grid communication interface (V2G CI) |
ISO/TC 22/SC 31/WG 2 | Vehicle diagnostic protocols |
ISO/TC 22/SC 31/WG 3 | In-vehicle networks |
ISO/TC 22/SC 31/WG 4 | Network applications |
ISO/TC 22/SC 31/WG 5 | Test equipment/Data eXchange Formats |
ISO/TC 22/SC 31/WG 6 | Extended vehicle/Remote diagnostics |
ISO/TC 22/SC 31/WG 9 | Sensor data interface for automated driving functions |
ISO/TC 22/SC 32 | Electrical and electronic components and general system aspects |
ISO/TC 22/SC 32/WG 1 | Ignition Equipment |
ISO/TC 22/SC 32/WG 10 | Optical components - Test methods and requirements |
ISO/TC 22/SC 32/WG 11 | Cybersecurity |
ISO/TC 22/SC 32/WG 12 | Software update |
ISO/TC 22/SC 32/WG 13 | Safety for driving automation systems |
ISO/TC 22/SC 32/WG 14 | Safety and Artificial Intelligence |
ISO/TC 22/SC 32/WG 2 | Environmental conditions |
ISO/TC 22/SC 32/WG 3 | Electromagnetic compatibility |
ISO/TC 22/SC 32/WG 4 | Automotive electrical cables |
ISO/TC 22/SC 32/WG 5 | Fuses and circuit breakers |
ISO/TC 22/SC 32/WG 6 | On-board electrical connections |
ISO/TC 22/SC 32/WG 8 | Functional safety |
ISO/TC 22/SC 32/WG 9 | Electrical connections between towing and towed vehicles |
ISO/TC 22/SC 33 | Vehicle dynamics, chassis components and driving automation systems testing |
ISO/TC 22/SC 33/WG 10 | Brake linings and friction couples |
ISO/TC 22/SC 33/WG 11 | Simulation |
ISO/TC 22/SC 33/WG 14 | Brake fluids |
ISO/TC 22/SC 33/WG 15 | Field load specification for brake modulation systems |
ISO/TC 22/SC 33/WG 16 | Active Safety test equipment |
ISO/TC 22/SC 33/WG 2 | Vehicle dynamics of passenger cars |
ISO/TC 22/SC 33/WG 3 | Driver assistance and active safety functions |
ISO/TC 22/SC 33/WG 5 | Wheels |
ISO/TC 22/SC 33/WG 6 | Vehicle dynamics of heavy commercial vehicles and buses |
ISO/TC 22/SC 33/WG 9 | Test scenarios of automated driving systems |
ISO/TC 22/SC 34 | Propulsion, powertrain and powertrain fluids |
ISO/TC 22/SC 34/AG 1 | Paraffinic Fuel Lubricity |
ISO/TC 22/SC 34/WG 1 | Fuel filters |
ISO/TC 22/SC 34/WG 11 | Separator performance, laboratory and engine test methods for crankcase ventilation systems |
ISO/TC 22/SC 34/WG 3 | Air filters |
ISO/TC 22/SC 34/WG 6 | Water injection |
ISO/TC 22/SC 35 | Lighting and visibility |
ISO/TC 22/SC 35/WG 1 | Lighting and light-signalling |
ISO/TC 22/SC 35/WG 2 | Safety glazing |
ISO/TC 22/SC 35/WG 3 | Visibility |
ISO/TC 22/SC 36 | Safety and impact testing |
ISO/TC 22/SC 36/WG 1 | Car collision test procedures |
ISO/TC 22/SC 36/WG 2 | Child restraint systems |
ISO/TC 22/SC 36/WG 3 | Instrumentation |
ISO/TC 22/SC 36/WG 5 | Anthropomorphic test devices |
ISO/TC 22/SC 36/WG 6 | Performance criteria expressed in biomechanical terms |
ISO/TC 22/SC 36/WG 7 | Traffic accident analysis methodology |
ISO/TC 22/SC 37 | Electrically propelled vehicles |
ISO/TC 22/SC 37/WG 1 | Safety aspects and terminology |
ISO/TC 22/SC 37/WG 2 | Performance and energy consumption |
ISO/TC 22/SC 37/WG 3 | Rechargeable energy storage |
ISO/TC 22/SC 37/WG 4 | Systems and components connected to electric propulsion systems |
ISO/TC 22/SC 37/WG 5 | Requirements for energy transfer |
ISO/TC 22/SC 37/WG 6 | Charging performance |
ISO/TC 22/SC 38 | Motorcycles and mopeds |
ISO/TC 22/SC 38/WG 1 | Pollution and energy |
ISO/TC 22/SC 38/WG 2 | Electric mopeds and motorcycles |
ISO/TC 22/SC 38/WG 3 | Functional safety |
ISO/TC 22/SC 38/WG 5 | Controls |
ISO/TC 22/SC 39 | Ergonomics |
ISO/TC 22/SC 39/WG 3 | Controls, displays, and tell-tale localization |
ISO/TC 22/SC 39/WG 5 | Symbols |
ISO/TC 22/SC 39/WG 7 | Hand reach and R and H point determination |
ISO/TC 22/SC 39/WG 8 | TICS on-board-MMI |
ISO/TC 22/SC 40 | Specific aspects for light and heavy commercial vehicles, busses and trailers |
ISO/TC 22/SC 40/WG 1 | Mechanical couplings |
ISO/TC 22/SC 40/WG 3 | Negative pressure compartment for ambulances |
ISO/TC 22/SC 41 | Specific aspects for gaseous fuels |
ISO/TC 22/SC 41/JWG 5 | Joint ISO/TC 22/SC 41 - ISO/TC 197 WG: Fuel system components and refuelling connector for vehicles propelled by blends of natural gas and hydrogen |
ISO/TC 22/SC 41/WG 3 | Fuel system components and refuelling connector for vehicles propelled by gaseous fuel |
ISO/TC 22/SC 41/WG 4 | Fuel system components and refuelling connector for vehicles propelled by Liquefied Natural Gas (LNG) |
ISO/TC 22/SC 41/WG 6 | Fuel system components and refuelling connector for vehicles propelled by Liquefied Petroleum Gas (LPG) |
ISO/TC 22/SC 41/WG 7 | General safety requirements for gaseous fuelled vehicles and terminology |
ISO/TC 22/SC 41/WG 8 | Fuel system components and refueling connector for vehicles propelled by Dimethyl Ether (DME) |
ISO/TC 22/SC 41/WG 9 | Training, competence and conformity assessment |
ISO/TC 23 | Tractors and machinery for agriculture and forestry |
ISO/TC 23/SC 13 | Powered lawn and garden equipment |
ISO/TC 23/SC 14 | Operator controls, operator symbols and other displays, operator manuals |
ISO/TC 23/SC 15 | Machinery for forestry |
ISO/TC 23/SC 17 | Manually portable (hand-held) powered lawn and garden equipment and forest machinery |
ISO/TC 23/SC 18 | Irrigation and drainage equipment and systems |
ISO/TC 23/SC 19 | Agricultural electronics |
ISO/TC 23/SC 2 | Common tests |
ISO/TC 23/SC 3 | Safety and comfort |
ISO/TC 23/SC 4 | Tractors |
ISO/TC 23/SC 6 | Equipment for crop protection |
ISO/TC 23/SC 7 | Equipment for harvesting and conservation |
ISO/TC 31 | Tyres, rims and valves |
ISO/TC 31/SC 10 | Cycle, moped, motorcycle tyres and rims |
ISO/TC 31/SC 3 | Passenger car tyres and rims |
ISO/TC 31/SC 4 | Truck and bus tyres and rims |
ISO/TC 31/SC 5 | Agricultural tyres and rims |
ISO/TC 31/SC 6 | Off-the-road tyres and rims |
ISO/TC 31/SC 7 | Industrial tyres and rims |
ISO/TC 31/SC 9 | Valves for tube and tubeless tyres |
ISO/TC 31/WG 8 | Methods for measuring snow and ice grip performance |
ISO/TC 70 | Internal combustion engines |
ISO/TC 70/SC 7 | Tests for lubricating oil filters |
ISO/TC 70/SC 7/WG 2 | Review of the no-reproducibility of Round Robin filtration efficiency results |
ISO/TC 70/SC 8 | Exhaust gas emission measurement |
ISO/TC 70/SC 8/WG 6 | Test bed measurement |
ISO/TC 70/WG 10 | Reciprocating internal combustion engine driven generating sets - Electrical aspect |
ISO/TC 70/WG 13 | Air-borne noise |
ISO/TC 70/WG 14 | Reciprocating internal combustion engine driven generating sets - Mechanical aspect |
ISO/TC 70/WG 2 | Terms and definitions |