Compila i campi per il download gratuito della UNI/PdR richiesta





Si No


Trattamento dei dati personali – informativa ex art.13 DLgs. 196/2003

Ai sensi dell'articolo 13 del DLgs. 196/2003, UNI - titolare del trattamento dei dati, domiciliato in via Sannio 2 - 20137 Milano - informa che i dati richiesti sono raccolti e trattati per finalità di:

- verifica che non vengano violate le norme sul diritto d’autore - informazione e promozione commerciale di prodotti e servizi UNI - indagini di mercato inerenti le attività UNI.

Per quanto riguarda il trattamento dei dati, esso viene effettuato in modo da garantire la sicurezza e riservatezza degli stessi mediante:

- strumenti manuali - strumenti informatici.

Nel caso in cui non venisse accordato il consenso al trattamento dei dati si segnala che verranno meno le prestazioni richieste di cui al punto precedente senza che UNI possa essere tenuto responsabile per il disservizio. Infine, come previsto dall'art. 7 del DLgs. 196/2003, si comunica al conferente dati che è in suo diritto accedere ai propri dati per consultarli, aggiornarli, cancellarli nonché opporsi al loro trattamento per legittimi motivi.

Trattamento dei dati personali – Consenso ex artt. 23,24,25 DLgs. 196/2003

Il sottoscritto, dato atto di avere ricevuto l'informativa prevista all'art. 13 del DLgs. 196/2003 in materia di tutela delle persone e di altri soggetti rispetto al trattamento dei dati personali, espressamente garantisce il suo consenso ai sensi degli articoli 23, 24, 25 del summenzionato decreto (inclusivo di raccolta, registrazione, organizzazione, conservazione, elaborazione, modificazione, selezione, estrazione, raffronto, utilizzo, interconnessione, blocco, comunicazione, diffusione, cancellazione, distruzione) secondo i termini della summenzionata informativa e nei limiti ivi indicati, dei propri dati personali acquisiti o che saranno acquisiti in futuro dall'UNI.

X

MENU
UN MONDO FATTO BENE
Login

Sito Internet: www.unsider.it
Presidente:
Patrizia Dapreda
Direttore:
 Giuliano Corbella

Via Crescenzago 55 - 20134 Milano - Tel. 0283986650

CAMPO DI ATTIVITÀ
Siderurgia, compresi i materiali ferrosi in senso lato e in modo più specifico minerali metallici (cromo, ferro, manganese, ecc.), ferroleghe, prodotti di ghisa e di acciaio della prima e seconda lavorazione (colati, laminati, fucinati, stampati a caldo, trafilati, formati a freddo, saldati, ecc.): lingotti, semilavorati, prodotti piani (lamiere e nastri), prodotti lunghi (vergella, filo, barre, profilati, tubi), getti, flange, raccordi, funi, prodotti da filo (chiodi, reti, ecc.), rivestiti e no, per tutti gli impieghi - Fonderia (attrezzi, macchine, terre per fonderia, modelli, ecc.) - Materiale rotabile ferrotranviario e rotaie ferroviarie e tranviarie - Materiali e prodotti refrattari - Tubazioni industriali - Materiale, equipaggiamento e strutture in mare per le industrie del petrolio e del gas naturale - Relative attività industriali, produttive e commerciali

 

TC CEN DI COMPETENZA
CEN/TC 107 Prefabricated district heating and district cooling pipe systems
CEN/TC 12 Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries
CEN/TC 187 Refractory products and materials
CEN/TC 190 Foundry technology
CEN/TC 190/WG 10 Testing for inner discontinuities
CEN/TC 190/WG 11 Surface testing
CEN/TC 190/WG 5 Grey cast iron and compacted graphite cast iron
CEN/TC 190/WG 6 Malleable cast iron
CEN/TC 190/WG 7 Spheroidal graphite, silicon molybdenum and austempered ductile iron
CEN/TC 202 Foundry machinery
CEN/TC 203 Cast iron pipes, fittings and their joints
CEN/TC 267 Industrial piping and pipelines
CEN/TC 342 Metal hoses, hose assemblies, bellows and expansion joints
CEN/TC 459 ECISS - European Committee for Iron and Steel Standardization
CEN/TC 459/SC 1 Test methods for steel (other than chemical analysis)
CEN/TC 459/SC 10 Steel tubes, and iron and steel fittings
CEN/TC 459/SC 10/WG 1 Tubes for pressure purposes
CEN/TC 459/SC 10/WG 10 Tubes for mechanical and general engineering purposes
CEN/TC 459/SC 10/WG 11 Hygienic and aseptic stainless steel tubes, fittings and connections for food, pharmaceutical and chemical industries
CEN/TC 459/SC 10/WG 2 Line pipe
CEN/TC 459/SC 10/WG 3 Fittings
CEN/TC 459/SC 10/WG 5 Tube for the conveyance of aqueous liquids
CEN/TC 459/SC 10/WG 6 Tube threads and service tubes
CEN/TC 459/SC 10/WG 7 Dimensions and tolerances
CEN/TC 459/SC 11 Steel castings and forgings
CEN/TC 459/SC 12 General issues
CEN/TC 459/SC 12/WG 5 Revision of EN 10020:2000
CEN/TC 459/SC 2 Methods of chemical analysis for iron and steel
CEN/TC 459/SC 3 Structural steels other than reinforcements
CEN/TC 459/SC 3/WG 1 Sheet piles
CEN/TC 459/SC 3/WG 3 Hollow sections
CEN/TC 459/SC 3/WG 4 Dimensional standards for hot rolled flat products
CEN/TC 459/SC 3/WG 5 Dimensional standards for cold rolled flat products
CEN/TC 459/SC 4 Concrete reinforcing and prestressing steels
CEN/TC 459/SC 4/WG 1 Weldable reinforcing steels
CEN/TC 459/SC 4/WG 2 Galvanized reinforcing steels
CEN/TC 459/SC 4/WG 3 Corrosion resistant reinforcing steels
CEN/TC 459/SC 4/WG 4 Pre-stressing steels
CEN/TC 459/SC 4/WG 5 Protected and sheathed strands for pre-stressing
CEN/TC 459/SC 5 Steels for heat treatment, alloy steels, free-cutting steels and stainless steels
CEN/TC 459/SC 6 Wire rod and wires
CEN/TC 459/SC 7 Steels for pressure purposes
CEN/TC 459/SC 8 Steel sheet and strip for electrical applications
CEN/TC 459/SC 9 Coated and uncoated flat products to be used for cold forming
CEN/TC 459/WG 1 Steel circular economy
CEN/TC 74 Flanges and their joints



TC ISO DI COMPETENZA
ISO/TC 102 Iron ore and direct reduced iron
ISO/TC 102/SC 1 Sampling
ISO/TC 102/SC 2 Chemical analysis
ISO/TC 102/SC 3 Physical testing
ISO/TC 105 Steel wire ropes
ISO/TC 132 Ferroalloys
ISO/TC 17 Steel
ISO/TC 17/SC 1 Methods of determination of chemical composition
ISO/TC 17/SC 10 Steel for pressure purposes
ISO/TC 17/SC 11 Steel castings
ISO/TC 17/SC 12 Continuous mill flat rolled products
ISO/TC 17/SC 15 Railway rails, rails fasteners, wheels and wheelsets
ISO/TC 17/SC 16 Steels for the reinforcement and prestressing of concrete
ISO/TC 17/SC 16/WG 8 Revision of ISO 15630-3
ISO/TC 17/SC 17 Steel wire rod and wire products
ISO/TC 17/SC 19 Technical delivery conditions for steel tubes for pressure purposes
ISO/TC 17/SC 19/WG 1 Non-destructive testing
ISO/TC 17/SC 20 General technical delivery conditions, sampling and mechanical testing methods
ISO/TC 17/SC 3 Steels for structural purposes
ISO/TC 17/SC 4 Heat treatable and alloy steels
ISO/TC 17/SC 7 Methods of testing (other than mechanical tests and chemical analysis)
ISO/TC 17/SC 9 Tinplate and blackplate
ISO/TC 25 Cast irons and pig irons
ISO/TC 306 Foundry machinery
ISO/TC 33 Refractories
ISO/TC 5 Ferrous metal pipes and metallic fittings
ISO/TC 5/SC 1 Steel tubes
ISO/TC 5/SC 10 Metallic flanges and their joints
ISO/TC 5/SC 11 Metal hoses and expansion joints
ISO/TC 5/SC 2 Cast iron pipes, fittings and their joints
ISO/TC 5/SC 5 Threaded fittings, solder fittings, welding fittings, pipe threads, thread gauges
ISO/TC 67 Oil and gas industries including lower carbon energy
ISO/TC 67/SC 10 Enhanced oil recovery
ISO/TC 67/SC 2 Pipeline transportation systems
ISO/TC 67/SC 3 Drilling and completion fluids, well cements and treatment fluids
ISO/TC 67/SC 4 Drilling, production and injection equipment
ISO/TC 67/SC 5 Casing, tubing and drill pipe
ISO/TC 67/SC 6 Process equipment, piping, systems, and related safety
ISO/TC 67/SC 7 Offshore structures
ISO/TC 67/SC 8 Arctic operations
ISO/TC 67/SC 9 Production, transport and storage facilities for cryogenic liquefied gases
ISO/TC 67/WG 5 Aluminium alloy pipes

Questo sito si serve dei cookie per fornire servizi. Utilizzando questo sito acconsenti all'utilizzo dei cookie. Clicca qui per ulteriori informazioni.