Compila i campi per il download gratuito della UNI/PdR richiesta





Si No


Trattamento dei dati personali – informativa ex art.13 DLgs. 196/2003

Ai sensi dell'articolo 13 del DLgs. 196/2003, UNI - titolare del trattamento dei dati, domiciliato in via Sannio 2 - 20137 Milano - informa che i dati richiesti sono raccolti e trattati per finalità di:

- verifica che non vengano violate le norme sul diritto d’autore - informazione e promozione commerciale di prodotti e servizi UNI - indagini di mercato inerenti le attività UNI.

Per quanto riguarda il trattamento dei dati, esso viene effettuato in modo da garantire la sicurezza e riservatezza degli stessi mediante:

- strumenti manuali - strumenti informatici.

Nel caso in cui non venisse accordato il consenso al trattamento dei dati si segnala che verranno meno le prestazioni richieste di cui al punto precedente senza che UNI possa essere tenuto responsabile per il disservizio. Infine, come previsto dall'art. 7 del DLgs. 196/2003, si comunica al conferente dati che è in suo diritto accedere ai propri dati per consultarli, aggiornarli, cancellarli nonché opporsi al loro trattamento per legittimi motivi.

Trattamento dei dati personali – Consenso ex artt. 23,24,25 DLgs. 196/2003

Il sottoscritto, dato atto di avere ricevuto l'informativa prevista all'art. 13 del DLgs. 196/2003 in materia di tutela delle persone e di altri soggetti rispetto al trattamento dei dati personali, espressamente garantisce il suo consenso ai sensi degli articoli 23, 24, 25 del summenzionato decreto (inclusivo di raccolta, registrazione, organizzazione, conservazione, elaborazione, modificazione, selezione, estrazione, raffronto, utilizzo, interconnessione, blocco, comunicazione, diffusione, cancellazione, distruzione) secondo i termini della summenzionata informativa e nei limiti ivi indicati, dei propri dati personali acquisiti o che saranno acquisiti in futuro dall'UNI.

X

MENU
UN MONDO FATTO BENE
Login

Sito Internet: www.uniplast.info
Presidente:
Roberto Frassine
Direttore: Gianluigi Moroni

Politecnico di Milano (Dipartimento di Chimica, Materiali e Ingegneria Chimica "Giulio Natta"), piazza Leonardo da Vinci 32 - 20133 Milano - Tel. 02 2399 6540/6541 - Telefax 0223996542

CAMPO DI ATTIVITÀ
Materie plastiche in generale, resine sintetiche, materie plastiche di riciclo, materie plastiche biodegradabili - Prodotti semifiniti e finiti ed applicazioni in vari campi di tali materie plastiche e resine, ad esempio: sistemi di tubazioni per l'edilizia, per l'industria, per acquedotti e gasdotti, prodotti per l'imballaggio (cassette, contenitori, sacchi, sacchetti, ecc.), per l'agricoltura (teli, reti, tubi, filtri, serbatoi, ecc.), per i trasporti (protezioni, finiture, interni, ecc.), per le infrastrutture (pali, sostegni, serbatoi, scarichi, ecc.) e le costruzioni (isolamento termico, lucernai, grondaie, serramenti, pannelli di rivestimento interni ed esterni, pavimenti, ecc.)

 

TC CEN DI COMPETENZA
CEN/TC 155 Plastics piping systems and ducting systems
CEN/TC 155/WG 1 Installation outside building structures of flexible piping systems and rainwater infiltration and storage/attenuation systems
CEN/TC 155/WG 12 Pressure systems of polyolefin material for gas supply, water supply and drainage and sewerage
CEN/TC 155/WG 13 Systems with structured-wall pipes for non-pressure drainage and sewerage - PE, PP, PVC-U
CEN/TC 155/WG 14 Systems of glass-reinforced thermosetting plastics for all applications - Polyester, epoxy and polyester resin based concrete
CEN/TC 155/WG 16 Systems for hot and cold water applications
CEN/TC 155/WG 17 Rehabilitation of pipeline systems
CEN/TC 155/WG 20 Thermoplastics ancillaries for soil and waste discharge and gravity buried drainage and sewerage systems
CEN/TC 155/WG 21 Internal CEN/TC 155 Guidance documents and templates for standards development
CEN/TC 155/WG 23 Thermoplastics systems for industrial applications
CEN/TC 155/WG 25 Recycling of PVC-U, PE and PP materials
CEN/TC 155/WG 26 Systems for storm water handling
CEN/TC 155/WG 27 Environmental aspects
CEN/TC 155/WG 28 Material assessment related to long term performance of non-pressure plastic piping systems
CEN/TC 155/WG 32 Valves
CEN/TC 155/WG 33 Thermoplastics piping systems for soil & waste discharge and non-pressure drainage and sewerage
CEN/TC 155/WG 34 Polyamid piping systems for gas supply
CEN/TC 155/WG 8 Systems for water supply and pressure drainage and sewerage - PVC (solid wall)
CEN/TC 210 GRP tanks and vessels
CEN/TC 249 Plastics
CEN/TC 249/WG 11 Plastics recycling
CEN/TC 249/WG 13 Wood Plastics Composites (WPC)
CEN/TC 249/WG 16 Welding of thermoplastics
CEN/TC 249/WG 21 Profiles for windows and doors
CEN/TC 249/WG 24 Environmental aspects
CEN/TC 249/WG 26 Agricultural plastic products - Design-for-recycling, use, removal, collection and recycling
CEN/TC 249/WG 4 Decorative laminated sheets based on thermosetting resins
CEN/TC 249/WG 5 Thermoplastic profiles for building applications
CEN/TC 249/WG 7 Thermoplastic films for use in agriculture
CEN/TC 249/WG 9 Bio-based and biodegradable plastics
CEN/TC 355 Lighters



TC ISO DI COMPETENZA
ISO/TC 138 Plastics pipes, fittings and valves for the transport of fluids
ISO/TC 138/AG 0 Advisory group
ISO/TC 138/SC 1 Plastics pipes and fittings for soil, waste and drainage (including land drainage)
ISO/TC 138/SC 2 Plastics pipes and fittings for water supplies
ISO/TC 138/SC 2/WG 1 Plastics piping systems for hot and cold water applications
ISO/TC 138/SC 2/WG 3 PVC piping systems for water supply
ISO/TC 138/SC 2/WG 4 PE piping systems for water supply
ISO/TC 138/SC 3 Plastics pipes and fittings for industrial applications
ISO/TC 138/SC 3/WG 7 Revision of industrial application standards
ISO/TC 138/SC 4 Plastics pipes and fittings for the supply of gaseous fuels
ISO/TC 138/SC 4/WG 1 Mechanical fittings
ISO/TC 138/SC 4/WG 2 Fusion of PE Pipe Systems
ISO/TC 138/SC 4/WG 3 PE Pipe Systems
ISO/TC 138/SC 4/WG 7 Polyamid Pipe Systems
ISO/TC 138/SC 5 General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications
ISO/TC 138/SC 5/WG 17 Alternative test methods
ISO/TC 138/SC 5/WG 20 Slow crack growth (SCG)
ISO/TC 138/SC 5/WG 5 Polyolefin pipes
ISO/TC 138/SC 6 Reinforced plastics pipes and fittings for all applications
ISO/TC 138/SC 6/WG 1 Methods of test
ISO/TC 138/SC 6/WG 3 Specifications for pipe systems
ISO/TC 138/SC 6/WG 5 Installation
ISO/TC 138/SC 7 Valves and auxiliary equipment of plastics materials
ISO/TC 138/SC 8 Rehabilitation of pipeline systems
ISO/TC 138/SC 8/WG 1 Classification, general information and assessment of conformity items: ISO 11295, ISO/TS 23818-1, -2 & -3 & -4
ISO/TC 138/SC 8/WG 2 ystems for rehabilitation of drainage, sewerage and water supply networks items: ISO 11300-1 (PE material), -2 (Thermoset composite materials) and -3 (PVC-U material)
ISO/TC 138/SC 8/WG 3 Plastics piping systems for rehabilitation of underground water supply networks
ISO/TC 138/SC 8/WG 4 ystems for rehabilitation of gas supply networks items: ISO 11301-1 (PE material)
ISO/TC 61 Plastics
ISO/TC 61/SC 1 Terminology
ISO/TC 61/SC 1/WG 1 Terms and definitions
ISO/TC 61/SC 1/WG 3 Symbols
ISO/TC 61/SC 10 Cellular plastics
ISO/TC 61/SC 10/WG 10 Plastic insulation
ISO/TC 61/SC 10/WG 11 Physical and chemical properties
ISO/TC 61/SC 10/WG 12 Mechanical and endurance properties
ISO/TC 61/SC 10/WG 14 Products and materials
ISO/TC 61/SC 11 Products
ISO/TC 61/SC 11/WG 11 Wood-plastic composites
ISO/TC 61/SC 11/WG 3 Plastics films and sheeting
ISO/TC 61/SC 11/WG 5 Polymeric adhesives
ISO/TC 61/SC 12 Thermosetting materials
ISO/TC 61/SC 12/WG 5 Unsaturated polyesters, epoxy resins and other resins
ISO/TC 61/SC 12/WG 6 Polyurethane raw materials
ISO/TC 61/SC 13 Composites and reinforcement fibres
ISO/TC 61/SC 13/WG 1 Reinforcements and reinforcement products
ISO/TC 61/SC 13/WG 2 Laminates and moulding compounds
ISO/TC 61/SC 14 Environmental aspects
ISO/TC 61/SC 14/WG 1 Terminology, classifications and general guidance
ISO/TC 61/SC 14/WG 2 Biodegradability
ISO/TC 61/SC 14/WG 3 Biobased plastics
ISO/TC 61/SC 14/WG 4 Characterization of plastics leaked into the environment (including microplastics) and quality control criteria of respective methods
ISO/TC 61/SC 14/WG 5 Mechanical and chemical recycling
ISO/TC 61/SC 2 Mechanical behavior
ISO/TC 61/SC 2/WG 1 Static behavior
ISO/TC 61/SC 2/WG 2 Hardness and surface properties
ISO/TC 61/SC 2/WG 3 Impact and high speed properties
ISO/TC 61/SC 2/WG 5 Temperature dependent behavior
ISO/TC 61/SC 2/WG 6 Dimensions of test specimens
ISO/TC 61/SC 2/WG 7 Fracture and fatigue behavior
ISO/TC 61/SC 2/WG 8 Forms of data presentation
ISO/TC 61/SC 4 Burning behaviour
ISO/TC 61/SC 4/WG 10 Lighters
ISO/TC 61/SC 4/WG 2 Smoke opacity and corrosivity
ISO/TC 61/SC 4/WG 8 Ignitability and fire growth
ISO/TC 61/SC 4/WG 9 Composites and semi-finished products
ISO/TC 61/SC 5 Physical-chemical properties
ISO/TC 61/SC 5/WG 11 Analytical methods
ISO/TC 61/SC 5/WG 5 Viscosity
ISO/TC 61/SC 5/WG 8 Thermal analysis
ISO/TC 61/SC 5/WG 9 Rheology
ISO/TC 61/SC 6 Ageing, chemical and environmental resistance
ISO/TC 61/SC 6/WG 2 Exposure to light
ISO/TC 61/SC 6/WG 3 Various exposures
ISO/TC 61/SC 6/WG 7 Basic standards
ISO/TC 61/SC 9 Thermoplastic materials
ISO/TC 61/SC 9/WG 14 Polymer dispersions
ISO/TC 61/SC 9/WG 18 Preparation of test specimens
ISO/TC 61/SC 9/WG 20 Poly(vinyl chloride)
ISO/TC 61/SC 9/WG 26 Thermoplastic elastomers
ISO/TC 61/SC 9/WG 6 Polyolefins
ISO/TC 61/SC 9/WG 7 Styrene polymers
ISO/TC 61/SC 9/WG 8 Polyamides

Questo sito si serve dei cookie per fornire servizi. Utilizzando questo sito acconsenti all'utilizzo dei cookie. Clicca qui per ulteriori informazioni.