MENU
Articoli
UNICHIM (Associazione per l'Unificazione nel settore dell'Industria Chimica)
Approfondimenti
Sito Internet: www.unichim.it
Presidente: Bruno Brianzoli
Segretario Generale: Giovanni Perego
Via P. Rubens 23 - 20148 Milano - Tel. 0276004450 - Telefax 0276014176
CAMPO DI ATTIVITÀ
Problemi analitici di base - Pitture per edilizia, vernici per legno, per materie plastiche e per la protezione di strutture in metallo - Adesivi - Prodotti petroliferi e lubrificanti - Fluidi per la lavorazione dei metalli - Combustibili solidi - Agenti tensioattivi - Campionamento ed analisi delle acque reflue, superficiali, potabili, ecc. - Campionamento, metodologie di analisi, determinazione degli inquinanti nell'atmosfera e nei flussi delle emissioni - Campionamento e analisi negli ambienti di lavoro e studi sul microclima ambientale - Metodi di analisi per i principali prodotti antiparassitari e determinazione dei loro residui - Prodotti fertilizzanti - Prodotti aromatizzanti e oli essenziali - Disinfettanti - Incapsulanti per cemento amianto - Interpretazione delle norme sulla certificazione per il settore chimico - Taratura della strumentazione analitica chimica - Metodi informatici di statistica chimica - Chemiometria - Analisi delle superfici - Validazione di metodi analitici - Materiali di riferimento - Sistemi di gestione della qualità, dell'ambiente, della sicurezza e dell'igiene ambientale nell'industria chimica - Fuochi artificiali - Esplosivi per uso civile - Sistemi qualità nei laboratori microbiologici
tr:nth-child(odd)
{
background-color: #e9e9e9;
}
table tr td {padding:5px}
| TC CEN DI COMPETENZA | |
| ASD-STAN | Aerospace |
| ASD-STAN/D 0 | Technical Authority |
| ASD-STAN/D 1 | Program Management and System Engineering |
| ASD-STAN/D 12/WG 4 | Displays, projection and interior lighting |
| ASD-STAN/D 2 | Electrical |
| ASD-STAN/D 2/WG 1 | Electrical Network |
| ASD-STAN/D 2/WG 10 | Optical |
| ASD-STAN/D 2/WG 12 | MOAA Modular and Open Avionics Architecture |
| ASD-STAN/D 2/WG 2 | Cables & Stripping Tools |
| ASD-STAN/D 2/WG 3 | Elements of Connection (Connectors, Contacts, rear accessories, crimping tools) |
| ASD-STAN/D 2/WG 4 | Relays, Switches, Push-Buttons |
| ASD-STAN/D 2/WG 5 | Protection Devices |
| ASD-STAN/D 2/WG 7 | Batteries |
| ASD-STAN/D 2/WG 8 | Installation Technologies |
| ASD-STAN/D 2/WG 9 | Data Bus |
| ASD-STAN/D 3 | Mechanical |
| ASD-STAN/D 3/WG 1 | Parts of Mechanical Systems |
| ASD-STAN/D 3/WG 2 | Fasteners |
| ASD-STAN/D 3/WG 3 | Hydraulics |
| ASD-STAN/D 4 | Materials |
| ASD-STAN/D 4/WG 1 | Light Alloys |
| ASD-STAN/D 4/WG 3 | Steels |
| ASD-STAN/D 4/WG 4 | Welding / Brazing |
| ASD-STAN/D 4/WG 5 | Test Methods |
| ASD-STAN/D 4/WG 8 | Composite |
| ASD-STAN/D 5/WG 8 | UAS Unmanned Aircraft Systems |
| ASD-STAN/D 6 | Quality and safety management |
| ASD-STAN/D 6/WG 1 | EAQG European Aerospace Quality Group |
| ASD-STAN/D 7 | Digital Projects |
| ASD-STAN/D 7/WG 1 | LOTAR LOng Term Archiving and Retrieval of Digital Technical Product Data |
| ASD-STAN/D 7/WG 2 | RFID Radio Frequency IDentification |
| ASD-STAN/D 8 | Aero engines and technologies |
| ASD-STAN/D 9 | Environment |
| CEN/CLC/ETSI/JWG eAcc | eAccessibility |
| CEN/CLC/JTC 1 | Criteria for conformity assessment bodies |
| CEN/CLC/JTC 10 | Material efficiency aspects for products in scope of Ecodesign legislation |
| CEN/CLC/JTC 11 | Accessibility in the built environment |
| CEN/CLC/JTC 12 | Design for All |
| CEN/CLC/JTC 13 | Cybersecurity and Data Protection |
| CEN/CLC/JTC 13/WG 5 | Data Protection, Privacy and Identity Management |
| CEN/CLC/JTC 14 | Energy management and energy efficiency in the framework of energy transition |
| CEN/CLC/JTC 14/WG 1 | Energy audits |
| CEN/CLC/JTC 14/WG 4 | Energy financial aspects |
| CEN/CLC/JTC 14/WG 5 | Guarantees of Origin related to energy |
| CEN/CLC/JTC 16 | Active Implantable Medical Devices |
| CEN/CLC/JTC 19 | Blockchain and Distributed Ledger Technologies |
| CEN/CLC/JTC 2 | Power Engineering |
| CEN/CLC/JTC 20 | Hyperloop systems |
| CEN/CLC/JTC 21 | Artificial Intelligence |
| CEN/CLC/JTC 22 | Quantum Technologies |
| CEN/CLC/JTC 3 | Quality management and corresponding general aspects for medical devices |
| CEN/CLC/JTC 4 | Services for fire safety and security systems |
| CEN/CLC/JTC 5 | Space |
| CEN/CLC/JTC 6 | Hydrogen in energy systems |
| CEN/CLC/JTC 6/WG 1 | Terms and Definitions |
| CEN/CLC/JTC 6/WG 2 | Guarantees of Origin |
| CEN/TC 10 | Lifts, escalators and moving walks |
| CEN/TC 10/SC 1 | Building hoists |
| CEN/TC 10/WG 2 | Escalators and moving walks |
| CEN/TC 102 | Sterilizers and associated equipment for processing of medical devices |
| CEN/TC 104 | Concrete and related products |
| CEN/TC 104/SC 1 | Concrete - Specification, performance, production and conformity |
| CEN/TC 104/SC 2 | Execution of concrete structures |
| CEN/TC 104/SC 3 | Admixtures for concrete |
| CEN/TC 104/SC 8 | Protection and repairs of concrete structures |
| CEN/TC 106 | Large kitchen appliances using gaseous fuels |
| CEN/TC 107 | Prefabricated district heating and district cooling pipe systems |
| CEN/TC 109 | Central heating boilers using gaseous fuels |
| CEN/TC 110 | Heat exchangers |
| CEN/TC 110/WG 1 | Heat exchangers used in the field of refrigeration and air conditioning |
| CEN/TC 110/WG 6 | Revision of EN 308 |
| CEN/TC 112 | Wood-based panels |
| CEN/TC 113 | Heat pumps and air conditioning units |
| CEN/TC 113/WG 10 | Heat pumps for domestic hot water production and revision of EN 16147 |
| CEN/TC 113/WG 11 | Direct expansion-to-water units |
| CEN/TC 113/WG 14 | Hydronic fan coil units |
| CEN/TC 113/WG 15 | Roof-top units |
| CEN/TC 113/WG 6 | Refrigerant compressors - Presentation of performance data |
| CEN/TC 113/WG 7 | Heat Pumps, air conditioners and chilling liquid packages - testing and rating at part load conditions |
| CEN/TC 113/WG 8 | Rating and testing for performance |
| CEN/TC 113/WG 9 | Sound rating of heat pumps, air conditioners and liquid chilling packages |
| CEN/TC 114 | Safety of machinery |
| CEN/TC 119 | Intermodal Loading Units and Cargo Securing (ILUCS) |
| CEN/TC 12 | Materials, equipment and offshore structures for petroleum, petrochemical and natural gas industries |
| CEN/TC 121 | Welding and allied processes |
| CEN/TC 121/SC 4 | Quality management in the field of welding |
| CEN/TC 122 | Ergonomics |
| CEN/TC 123 | Lasers and photonics |
| CEN/TC 124 | Timber structures |
| CEN/TC 125 | Masonry |
| CEN/TC 125/WG 2 | Mortar |
| CEN/TC 125/WG 4 | Test methods |
| CEN/TC 126 | Acoustic properties of building elements and of buildings |
| CEN/TC 126/WG 1 | Methods for measuring the sound insulation of building elements and the acoustic performances of buildings |
| CEN/TC 126/WG 12 | BIM Acoustics |
| CEN/TC 126/WG 2 | Prediction of the acoustic performance of buildings from the performance of elements |
| CEN/TC 126/WG 7 | Laboratory measurement of airborne and structure borne sound from building equipment |
| CEN/TC 127 | Fire safety in buildings |
| CEN/TC 127/WG 3 | Fire Doors |
| CEN/TC 127/WG 8 | Fire Safety Engineering |
| CEN/TC 128 | Roof covering products for discontinuous laying and products for wall cladding |
| CEN/TC 128/SC 1 | General requirements for roofing products - Types and scope of tests |
| CEN/TC 128/SC 10 | Gutters |
| CEN/TC 128/SC 11 | Double skin metal faced insulating sandwich panels for roofing and cladding |
| CEN/TC 128/SC 2 | Concrete roofing tiles |
| CEN/TC 128/SC 3 | Clay roofing tiles |
| CEN/TC 128/SC 4 | Fibre-cement products for roofing |
| CEN/TC 128/SC 6 | Bitumen shingles and corrugated sheets for roofing |
| CEN/TC 128/SC 7 | Roofing products from metal sheet |
| CEN/TC 128/SC 8 | Slate and stone products for roofing |
| CEN/TC 128/SC 9 | Prefabricated accessories for roofing |
| CEN/TC 129 | Glass in building |
| CEN/TC 130 | Space heating and/or cooling appliances without integral thermal sources |
| CEN/TC 130/WG 10 | Trench convectors and fan assisted radiators and convectors |
| CEN/TC 130/WG 11 | Radiators |
| CEN/TC 130/WG 12 | Connections for heating appliances |
| CEN/TC 130/WG 13 | Determination of parameters for the efficiency of heating and cooling emission products in relation to prEN 15316-2. Coordination - Group |
| CEN/TC 130/WG 7 | Pre-fabricated heating panels, definitions, testing and methods for determining heat outputs |
| CEN/TC 130/WG 9 | Floor heating - Systems and components |
| CEN/TC 131 | Gas burners using fans |
| CEN/TC 132 | Aluminium and aluminium alloys |
| CEN/TC 133 | Copper and copper alloys |
| CEN/TC 133/WG 4 | Extruded and drawn products, forgings and scrap |
| CEN/TC 134 | Resilient, textile, laminate and modular mechanical locked floor coverings |
| CEN/TC 135 | Execution of steel structures and aluminium structures |
| CEN/TC 136 | Sports, playground and other recreational facilities and equipment |
| CEN/TC 136/SC 1 | Playground equipment for children |
| CEN/TC 136/WG 16 | Spa and Wellness centres for public use |
| CEN/TC 136/WG 5 | Mountaineering and climbing equipment |
| CEN/TC 136/WG 8 | Swimming pools |
| CEN/TC 137 | Assessment of workplace exposure to chemical and biological agents |
| CEN/TC 137/WG 5 | Measurement of biological agents |
| CEN/TC 138 | Non-destructive testing |
| CEN/TC 138/WG 1 | Radiographic testing |
| CEN/TC 138/WG 11 | Themographic testing |
| CEN/TC 138/WG 2 | Ultrasonic testing |
| CEN/TC 138/WG 4 | Penetrant testing |
| CEN/TC 138/WG 5 | Magnetic particle testing |
| CEN/TC 138/WG 7 | Acoustic emission testing |
| CEN/TC 139 | Paints and varnishes |
| CEN/TC 140 | In vitro diagnostic medical devices |
| CEN/TC 142 | Woodworking machines - Safety |
| CEN/TC 143 | Machine tools - Safety |
| CEN/TC 143/WG 1 | Metal forming machine tools - Safety |
| CEN/TC 144 | Tractors and machinery for agriculture and forestry |
| CEN/TC 144/WG 1 | General safety requirements |
| CEN/TC 144/WG 2 | Tractors and self propelled machines |
| CEN/TC 144/WG 3 | Mobile machines and trailers |
| CEN/TC 144/WG 4 | Portable machines and pedestrian controlled machines |
| CEN/TC 144/WG 5 | Stationary equipment |
| CEN/TC 144/WG 6 | Manually portable forestry machinery |
| CEN/TC 144/WG 7 | Powered Lawn and Garden equipment |
| CEN/TC 144/WG 8 | Forestry machinery |
| CEN/TC 144/WG 9 | Compact tool carriers for agriculture and forestry |
| CEN/TC 145 | Plastics and rubber machines |
| CEN/TC 146 | Packaging machines - Safety |
| CEN/TC 147 | Cranes - Safety |
| CEN/TC 147/WG 18 | Loader cranes |
| CEN/TC 147/WG 2 | Design - General |
| CEN/TC 148 | Continuous handling equipment and systems - Safety |
| CEN/TC 149 | Power-operated warehouse equipment |
| CEN/TC 15 | Inland navigation vessels |
| CEN/TC 150 | Industrial Trucks - Safety |
| CEN/TC 150/WG 2 | Variable reach trucks |
| CEN/TC 151 | Construction equipment and building material machines - Safety |
| CEN/TC 151/WG 1 | Earth-moving machinery - Safety |
| CEN/TC 152 | Fairground and amusement park machinery and structures - Safety |
| CEN/TC 153 | Machinery intended for use with foodstuffs and feed |
| CEN/TC 154 | Aggregates |
| CEN/TC 154/SC 1 | Aggregates for concrete, mortar and grouts |
| CEN/TC 154/SC 3 | Bituminous bound aggregates |
| CEN/TC 154/SC 4 | Hydraulic bound and unbound aggregates |
| CEN/TC 154/SC 5 | Lightweight aggregates |
| CEN/TC 154/SC 6 | Test methods |
| CEN/TC 155 | Plastics piping systems and ducting systems |
| CEN/TC 155/WG 1 | Installation outside building structures of flexible piping systems and rainwater infiltration and storage/attenuation systems |
| CEN/TC 155/WG 12 | Pressure systems of polyolefin material for gas supply, water supply and drainage and sewerage |
| CEN/TC 155/WG 13 | Systems with structured-wall pipes for non-pressure drainage and sewerage - PE, PP, PVC-U |
| CEN/TC 155/WG 14 | Systems of glass-reinforced thermosetting plastics for all applications - Polyester, epoxy and polyester resin based concrete |
| CEN/TC 155/WG 16 | Systems for hot and cold water applications |
| CEN/TC 155/WG 17 | Rehabilitation of pipeline systems |
| CEN/TC 155/WG 20 | Thermoplastics ancillaries for soil and waste discharge and gravity buried drainage and sewerage systems |
| CEN/TC 155/WG 21 | Internal CEN/TC 155 Guidance documents and templates for standards development |
| CEN/TC 155/WG 23 | Thermoplastics systems for industrial applications |
| CEN/TC 155/WG 25 | Recycling of PVC-U, PE and PP materials |
| CEN/TC 155/WG 26 | Systems for storm water handling |
| CEN/TC 155/WG 27 | Environmental aspects |
| CEN/TC 155/WG 28 | Material assessment related to long term performance of non-pressure plastic piping systems |
| CEN/TC 155/WG 32 | Valves |
| CEN/TC 155/WG 33 | Thermoplastics piping systems for soil & waste discharge and non-pressure drainage and sewerage |
| CEN/TC 155/WG 34 | Polyamid piping systems for gas supply |
| CEN/TC 155/WG 8 | Systems for water supply and pressure drainage and sewerage - PVC (solid wall) |
| CEN/TC 156 | Ventilation for buildings |
| CEN/TC 156/WG 1 | Terminology |
| CEN/TC 156/WG 14 | Ventilation of commercial kitchens |
| CEN/TC 156/WG 16 | Joint Working Group between CEN/TC 156 and CEN/TC 113 - Multifunctional balanced ventilation units for single family dwellings, including heat pumps |
| CEN/TC 156/WG 17 | Fans |
| CEN/TC 156/WG 18 | Ventilation in hospitals |
| CEN/TC 156/WG 2 | Natural and mechanical powered residential ventilation |
| CEN/TC 156/WG 20 | Ventilation and Room-Conditioning Systems in non-Residential Buildings |
| CEN/TC 156/WG 21 | Energy performance calculation of ventilation and cooling systems |
| CEN/TC 156/WG 23 | Ventilation for Buildings - Inspection and checking |
| CEN/TC 156/WG 3 | Ductwork |
| CEN/TC 156/WG 4 | Air terminal devices |
| CEN/TC 156/WG 5 | Air handling units |
| CEN/TC 156/WG 8 | Installation |
| CEN/TC 156/WG 9 | Fire precautions for air distribution systems in buildings |
| CEN/TC 158 | Head protection |
| CEN/TC 159 | Hearing protectors |
| CEN/TC 160 | Protection against falls from height including working belts |
| CEN/TC 161 | Foot and leg protectors |
| CEN/TC 162 | Protective clothing including hand and arm protection and lifejackets |
| CEN/TC 162/WG 9 | Motorcycle rider protective clothing |
| CEN/TC 163 | Sanitary appliances |
| CEN/TC 163/WG 3 | Closet bowls, flushing cisterns, urinals, bidets and kitchen sinks |
| CEN/TC 163/WG 4 | Baths (W/Pools) - Shower trays (Performance testing) |
| CEN/TC 164 | Water supply |
| CEN/TC 164/WG 8 | Sanitary tapware |
| CEN/TC 164/WG 9 | Drinking water treatment |
| CEN/TC 165 | Waste water engineering |
| CEN/TC 165/WG 4 | Manhole tops, gully tops, drainage channels and other ancillary components for use outside buildings |
| CEN/TC 166 | Chimneys |
| CEN/TC 166/SC 2 | Chimneys and their components with inner linings of metal |
| CEN/TC 166/SC 2/WG 1 | Corrosion Test Method |
| CEN/TC 166/SC 2/WG 2 | System Chimneys and Test Methods |
| CEN/TC 166/SC 2/WG 3 | Metal chimneys - Liners and connecting flue pipes |
| CEN/TC 166/SC 2/WG 4 | Multiappliance systems |
| CEN/TC 166/SC 2/WG 5 | Metal chimneys for room sealed applications |
| CEN/TC 166/WG 1 | General requirements |
| CEN/TC 166/WG 2 | Thermal and fluid dynamic calculation methods for chimneys |
| CEN/TC 166/WG 4 | Chimneys and their components with inner linings of plastic |
| CEN/TC 167 | Structural bearings |
| CEN/TC 168 | Chains, ropes, webbing, slings and accessories - Safety |
| CEN/TC 169 | Light and lighting |
| CEN/TC 169/WG 1 | Basic terms and criteria |
| CEN/TC 169/WG 11 | Daylight |
| CEN/TC 169/WG 12 | Joint Working Group with CEN/TC 226 - Road lighting |
| CEN/TC 169/WG 15 | Assessment and control of obtrusive light in outdoor spaces |
| CEN/TC 169/WG 2 | Lighting of work places |
| CEN/TC 169/WG 3 | Emergency lighting in buildings |
| CEN/TC 169/WG 4 | Sports lighting |
| CEN/TC 169/WG 6 | Tunnel lighting |
| CEN/TC 169/WG 7 | Photometry |
| CEN/TC 169/WG 9 | Energy performance of buildings |
| CEN/TC 170 | Ophthalmic optics |
| CEN/TC 171 | Heat cost allocation |
| CEN/TC 171/WG 1 | Heat cost allocators |
| CEN/TC 172 | Pulp, paper and board |
| CEN/TC 175 | Round and sawn timber |
| CEN/TC 176 | Thermal energy meters |
| CEN/TC 176/WG 2 | Thermal energy meters - Requirements, test methods and technical editing |
| CEN/TC 177 | Prefabricated reinforced components of autoclaved aerated concrete or light-weight aggregate concrete with open structure |
| CEN/TC 178 | Paving units and kerbs |
| CEN/TC 178/WG 1 | Precast concrete products |
| CEN/TC 178/WG 2 | Natural stone products |
| CEN/TC 180 | Decentralized gas heating |
| CEN/TC 181 | Appliances and leisure vehicle installations using liquefied petroleum gas and appliances using natural gas for outdoor use |
| CEN/TC 182 | Refrigerating systems, safety and environmental requirements |
| CEN/TC 182/WG 11 | Revision of EN 14624 |
| CEN/TC 182/WG 12 | Flammable Refrigerants Standardization Request M/555 |
| CEN/TC 182/WG 2 | Design and testing |
| CEN/TC 182/WG 4 | Competence |
| CEN/TC 182/WG 6 | Revision of EN 378 |
| CEN/TC 182/WG 7 | JWG CEN/TC 182/CEN/TC 54 Pressure vessels for refrigerating systems |
| CEN/TC 182/WG 9 | Tightness of components |
| CEN/TC 183 | Waste management |
| CEN/TC 184 | Advanced technical ceramics |
| CEN/TC 184/SC 1 | Advanced technical ceramics - ceramic composites |
| CEN/TC 185 | Fasteners |
| CEN/TC 185/WG 6 | Structural bolting |
| CEN/TC 186 | Industrial thermoprocessing - Safety |
| CEN/TC 186/WG 1 | Industrial furnaces and heating equipment - Common safety requirements |
| CEN/TC 186/WG 2 | Combustion - Gas and Liquids - Safety requirements |
| CEN/TC 186/WG 3 | Controlled atmospheres - Safety requirements |
| CEN/TC 186/WG 4 | Protective systems |
| CEN/TC 187 | Refractory products and materials |
| CEN/TC 188 | Conveyor belts |
| CEN/TC 189 | Geosynthetics |
| CEN/TC 19 | Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin |
| CEN/TC 19/JWG 1 | Vegetable fats and oils and their by-products for use in automotive fuels (Joint working group with CEN/TC 307) |
| CEN/TC 19/WG 14 | Cold flow properties |
| CEN/TC 19/WG 15 | Vapour pressure methods |
| CEN/TC 19/WG 27 | Elemental analysis of petroleum and related products |
| CEN/TC 19/WG 31 | Total contamination |
| CEN/TC 19/WG 33 | Bio-lubricants |
| CEN/TC 19/WG 34 | Diesel fuel cold operability correlation |
| CEN/TC 19/WG 36 | Precision evaluation |
| CEN/TC 19/WG 38 | New Fuels Coordination and Planning |
| CEN/TC 19/WG 40 | Distillation characteristics |
| CEN/TC 19/WG 9 | Chromatographic test methods |
| CEN/TC 190 | Foundry technology |
| CEN/TC 190/WG 10 | Testing for inner discontinuities |
| CEN/TC 190/WG 11 | Surface testing |
| CEN/TC 190/WG 5 | Grey cast iron and compacted graphite cast iron |
| CEN/TC 190/WG 6 | Malleable cast iron |
| CEN/TC 190/WG 7 | Spheroidal graphite, silicon molybdenum and austempered ductile iron |
| CEN/TC 191 | Fixed firefighting systems |
| CEN/TC 191/SC 1 | Smoke and heat control systems and components |
| CEN/TC 191/WG 10 | Water mist systems |
| CEN/TC 191/WG 2 | Foam extinguishing systems |
| CEN/TC 191/WG 3 | Fire extinguishing media - Foam |
| CEN/TC 191/WG 4 | Powder extinguishing systems |
| CEN/TC 191/WG 5 | Sprinkler systems |
| CEN/TC 191/WG 6 | Gas extinguishing Systems and components |
| CEN/TC 192 | Fire and Rescue Service Equipment |
| CEN/TC 193 | Adhesives |
| CEN/TC 193/SC 1 | Adhesives for wood and derived timber products |
| CEN/TC 193/WG 1 | General terminology - General physical and chemical tests |
| CEN/TC 193/WG 2 | Structural adhesives |
| CEN/TC 193/WG 3 | Adhesives for paper and board, packaging and disposable sanitary products |
| CEN/TC 193/WG 4 | Building adhesives |
| CEN/TC 194 | Utensils in contact with food |
| CEN/TC 195 | Cleaning equipment for air and other gases |
| CEN/TC 195/WG 2 | HEPA and ULPA filters |
| CEN/TC 196 | Mining machinery and equipment - Safety |
| CEN/TC 197 | Pumps |
| CEN/TC 198 | Printing and paper machinery - Safety |
| CEN/TC 202 | Foundry machinery |
| CEN/TC 203 | Cast iron pipes, fittings and their joints |
| CEN/TC 204 | Sterilization of medical devices |
| CEN/TC 205 | Non-active medical devices |
| CEN/TC 205/WG 17 | Infection protection masks |
| CEN/TC 206 | Biological and clinical evaluation of medical devices |
| CEN/TC 207 | Furniture |
| CEN/TC 208 | Elastomeric seals for joints in pipework and pipelines |
| CEN/TC 209 | Zinc and zinc alloys |
| CEN/TC 210 | GRP tanks and vessels |
| CEN/TC 211 | Acoustics |
| CEN/TC 212 | Pyrotechnic articles |
| CEN/TC 213 | Cartridge operated hand-held tools - Safety |
| CEN/TC 214 | Textile machinery and machinery for dry-cleaning and industrial laundry |
| CEN/TC 215 | Respiratory and anaesthetic equipment |
| CEN/TC 216 | Chemical disinfectants and antiseptics |
| CEN/TC 217 | Surfaces for sports areas |
| CEN/TC 218 | Rubber and plastics hoses and hose assemblies |
| CEN/TC 219 | Cathodic protection |
| CEN/TC 223 | Soil improvers and growing media |
| CEN/TC 224 | Personal identification and related personal devices with secure element, systems, operations and privacy in a multi sectorial environment |
| CEN/TC 225 | AIDC technologies |
| CEN/TC 226 | Road equipment |
| CEN/TC 226/WG 1 | Crash barriers, safety fences, guard rails and bridge parapets |
| CEN/TC 226/WG 10 | Passive safety of support structures for road equipment |
| CEN/TC 226/WG 11 | Variable message signs |
| CEN/TC 226/WG 12 | Road interaction - ADAS / Autonomous vehicles |
| CEN/TC 226/WG 2 | Horizontal road signs |
| CEN/TC 226/WG 3 | Vertical signs |
| CEN/TC 226/WG 4 | Traffic control |
| CEN/TC 226/WG 6 | Noise reducing devices |
| CEN/TC 227 | Road materials |
| CEN/TC 227/WG 5 | Surface characteristics |
| CEN/TC 228 | Heating systems and water based cooling systems in buildings |
| CEN/TC 228/WG 1 | General performance requirements of heating systems and sub-systems in buildings |
| CEN/TC 228/WG 4 | Calculation methods and system performance and evaluation |
| CEN/TC 229 | Precast concrete products |
| CEN/TC 229/WG 3 | Products for which the stability requirements is not dominant |
| CEN/TC 23 | Transportable gas cylinders |
| CEN/TC 230 | Water analysis |
| CEN/TC 230/WG 1 | Physical and biochemical methods |
| CEN/TC 230/WG 2 | Biological methods co-ordination group |
| CEN/TC 230/WG 4 | Performance Requirements for Water Monitoring Equipment |
| CEN/TC 231 | Mechanical vibration and shock |
| CEN/TC 232 | Compressors, vacuum pumps and their systems |
| CEN/TC 233 | Biotechnology |
| CEN/TC 234 | Gas infrastructure |
| CEN/TC 234/WG 1 | Gas installations |
| CEN/TC 234/WG 11 | Gas Quality |
| CEN/TC 234/WG 3 | Gas Transportation |
| CEN/TC 234/WG 5 | Gas measuring |
| CEN/TC 234/WG 6 | Gas pressure regulation |
| CEN/TC 234/WG 7 | Gas compression |
| CEN/TC 234/WG 8 | Industrial piping |
| CEN/TC 235 | Gas pressure regulators and associated safety devices for use in gas transmission and distribution |
| CEN/TC 236 | Non industrial manually operated shut-off valves for gas and particular combinations valves-other products |
| CEN/TC 237 | Gas meters |
| CEN/TC 238 | Test gases, test pressures, appliance categories and gas appliance types |
| CEN/TC 239 | Rescue systems |
| CEN/TC 239/WG 1 | Medical vehicles and their equipment - Stretchers and other patient handling equipment |
| CEN/TC 240 | Thermal spraying and thermally sprayed coatings |
| CEN/TC 241 | Gypsum and gypsum based products |
| CEN/TC 242 | Safety requirements for passenger transportation by rope |
| CEN/TC 243 | Cleanroom technology |
| CEN/TC 245 | Leisure accommodation vehicles |
| CEN/TC 245/WG 6 | Technical and habitation requirements for Leisure Accommodation Vehicles |
| CEN/TC 246 | Natural stones |
| CEN/TC 247 | Building Automation, Controls and Building Management |
| CEN/TC 247/WG 4 | Open System Data Transmission |
| CEN/TC 247/WG 6 | Electronic control equipment for HVAC applications, integrated room automation, controls and management systems |
| CEN/TC 248 | Textiles and textile products |
| CEN/TC 248/WG 10 | Size system of clothing |
| CEN/TC 248/WG 20 | Safety of children's clothing |
| CEN/TC 248/WG 24 | Test methods for the flammability of textiles |
| CEN/TC 248/WG 26 | Textiles -Test methods for analysis of EC restricted substances |
| CEN/TC 248/WG 30 | Composition - Qualitative and quantitative analysis of fibres and fibre mixtures |
| CEN/TC 248/WG 31 | Smart textiles and electronic textiles |
| CEN/TC 248/WG 34 | Joint Working Group between CEN/TC 248 and CEN/TC 252 - Risks in the sleeping environment |
| CEN/TC 248/WG 35 | Slide (zip) fasteners |
| CEN/TC 248/WG 37 | Microplastics from textile sources |
| CEN/TC 248/WG 38 | Community face coverings - Guide to minimum requirements, methods of testing and use |
| CEN/TC 248/WG 39 | Circular Economy for textile products and the textile chain |
| CEN/TC 248/WG 4 | Coated fabrics |
| CEN/TC 248/WG 9 | Prioritization of research topics |
| CEN/TC 249 | Plastics |
| CEN/TC 249/WG 11 | Plastics recycling |
| CEN/TC 249/WG 13 | Wood Plastics Composites (WPC) |
| CEN/TC 249/WG 16 | Welding of thermoplastics |
| CEN/TC 249/WG 21 | Profiles for windows and doors |
| CEN/TC 249/WG 24 | Environmental aspects |
| CEN/TC 249/WG 26 | Agricultural plastic products - Design-for-recycling, use, removal, collection and recycling |
| CEN/TC 249/WG 4 | Decorative laminated sheets based on thermosetting resins |
| CEN/TC 249/WG 5 | Thermoplastic profiles for building applications |
| CEN/TC 249/WG 7 | Thermoplastic films for use in agriculture |
| CEN/TC 249/WG 9 | Bio-based and biodegradable plastics |
| CEN/TC 250 | Structural Eurocodes |
| CEN/TC 250/SC 1 | Eurocode 1: Actions on structures |
| CEN/TC 250/SC 10 | EN 1990 Basis of structural design |
| CEN/TC 250/SC 11 | Structural glass |
| CEN/TC 250/SC 2 | Eurocode 2: Design of concrete structures |
| CEN/TC 250/SC 2/WG 2 | Design of fastenings for use in concrete |
| CEN/TC 250/SC 3 | Eurocode 3 - Design of steel structures |
| CEN/TC 250/SC 4 | Eurocode 4: Design of composite steel and concrete structures |
| CEN/TC 250/SC 5 | Eurocode 5: Design of timber structures |
| CEN/TC 250/SC 6 | Eurocode 6: Design of masonry structures |
| CEN/TC 250/SC 7 | Eurocode 7 - Geotechnical design |
| CEN/TC 250/SC 8 | Eurocode 8: Earthquake resistance design of structures |
| CEN/TC 250/SC 8/WG 1 | Masonry |
| CEN/TC 250/SC 9 | Eurocode 9: Design of aluminium structures |
| CEN/TC 250/WG 2 | Assessment and Retrofitting of Existing Structures |
| CEN/TC 250/WG 4 | Fibre reinforced polymer structures |
| CEN/TC 250/WG 5 | Membrane Structures |
| CEN/TC 250/WG 6 | Robustness |
| CEN/TC 251 | Health informatics |
| CEN/TC 252 | Child care articles |
| CEN/TC 254 | Flexible sheets for waterproofing |
| CEN/TC 254/SC 1 | Bitumen sheeting |
| CEN/TC 254/SC 2 | Synthetic sheets |
| CEN/TC 255 | Hand-held, non-electric power tools - Safety |
| CEN/TC 256 | Railway applications |
| CEN/TC 256/SC 1 | Infrastructure |
| CEN/TC 256/SC 1/WG 40 | Noise barriers |
| CEN/TC 256/SC 2 | Rolling stock products |
| CEN/TC 256/SC 3 | Rolling stock systems |
| CEN/TC 256/WG 1 | Fire Protection |
| CEN/TC 260 | Fertilizers and liming materials |
| CEN/TC 261 | Packaging |
| CEN/TC 261/SC 4 | Packaging and Environment |
| CEN/TC 261/SC 4/WG 10 | Design for recycling for plastic packaging products. |
| CEN/TC 261/SC 5 | Primary packaging and transport packaging |
| CEN/TC 262 | Metallic and other inorganic coatings, including for corrosion protection and corrosion testing of metals and alloys |
| CEN/TC 263 | Secure storage of cash, valuables and data media |
| CEN/TC 264 | Air quality |
| CEN/TC 265 | Metallic tanks for the storage of liquids |
| CEN/TC 265/WG 8 | Shop fabricated tanks |
| CEN/TC 265/WG 9 | Revision of EN 14015 |
| CEN/TC 267 | Industrial piping and pipelines |
| CEN/TC 268 | Cryogenic vessels |
| CEN/TC 269 | Shell and water-tube boilers |
| CEN/TC 269/WG 1 | Water-tube boilers |
| CEN/TC 269/WG 2 | Shell boilers |
| CEN/TC 270 | Internal combustion engines |
| CEN/TC 271 | Surface treatment equipment - Safety |
| CEN/TC 274 | Aircraft ground support equipment |
| CEN/TC 275 | Food analysis - Horizontal methods |
| CEN/TC 276 | Surface active agents |
| CEN/TC 277 | Suspended ceilings |
| CEN/TC 278 | Intelligent Transport Systems |
| CEN/TC 278/WG 1 | Electronic fee collection and access control (EFC) |
| CEN/TC 278/WG 15 | eSafety |
| CEN/TC 278/WG 16 | Cooperative ITS |
| CEN/TC 278/WG 17 | Mobility integration |
| CEN/TC 278/WG 3 | Public transport (PT) |
| CEN/TC 278/WG 8 | Road traffic data (RTD) |
| CEN/TC 279 | Value management - Value analysis, function analysis |
| CEN/TC 281 | Appliances, solid fuels and firelighters for barbecuing |
| CEN/TC 281/WG 1 | Barbecues burning solid fuels |
| CEN/TC 281/WG 5 | Solid fuels and firelighters for barbecuing and single-use-barbecues |
| CEN/TC 282 | Installation and equipment for LNG |
| CEN/TC 284 | Greenhouses |
| CEN/TC 285 | Non-active surgical implants |
| CEN/TC 286 | Liquefied petroleum gas equipment and accessories |
| CEN/TC 287 | Geographic Information |
| CEN/TC 288 | Execution of special geotechnical works |
| CEN/TC 289 | Leather |
| CEN/TC 289/WG 1 | Chemical test methods |
| CEN/TC 289/WG 2 | Physical test methods |
| CEN/TC 289/WG 3 | Fastness test methods |
| CEN/TC 289/WG 4 | Technical specifications on the use of leather and terminology |
| CEN/TC 290 | Dimensional and geometrical product specification and verification |
| CEN/TC 293 | Assistive products and accessibility |
| CEN/TC 294 | Communication systems for meters |
| CEN/TC 295 | Residential solid fuel burning appliances |
| CEN/TC 295/WG 1 | Appliances fired by solid fuels |
| CEN/TC 295/WG 2 | Appliances fired by pellets |
| CEN/TC 295/WG 3 | Heat storage stoves (SHRA) and sauna stoves |
| CEN/TC 295/WG 4 | Tiled Stoves |
| CEN/TC 295/WG 5 | Measurement methods |
| CEN/TC 295/WG 6 | CPR and Mandates |
| CEN/TC 296 | Tanks for the transport of dangerous goods |
| CEN/TC 297 | Free-standing industrial chimneys |
| CEN/TC 298 | Pigments and extenders |
| CEN/TC 299 | Gas-fired sorption appliances, indirect fired sorption appliances, gas-fired endothermic engine heat pumps and domestic gas-fired washing and drying appliances. |
| CEN/TC 301 | Road vehicles |
| CEN/TC 301/WG 11 | Safety of roller brake testers |
| CEN/TC 301/WG 15 | Safety of machines for mounting and demounting vehicles tyres |
| CEN/TC 301/WG 16 | Performance assessment of the Portable Emission Measuring Systems (PEMS) |
| CEN/TC 301/WG 17 | Plastics recycling and sustainability for road vehicles |
| CEN/TC 301/WG 18 | Electric vehicles batteries |
| CEN/TC 301/WG 6 | M/421 Vehicle OBD, repair and maintenance information |
| CEN/TC 301/WG 7 | Supplementary grip devices |
| CEN/TC 302 | Milk and milk products - Methods of sampling and analysis |
| CEN/TC 303 | Floor screeds and screed materials |
| CEN/TC 304 | Information and communications technologies - European localization requirements |
| CEN/TC 305 | Potentially explosive atmospheres - Explosion prevention and protection |
| CEN/TC 306 | Lead and lead alloys |
| CEN/TC 307 | Oilseeds, vegetable and animal fats and oils and their by-products - Methods of sampling and analysis |
| CEN/TC 308 | Characterization and management of sludge |
| CEN/TC 309 | Footwear |
| CEN/TC 310 | Advanced automation technologies and their applications |
| CEN/TC 312 | Thermal solar systems and components |
| CEN/TC 312/WG 1 | Solar collectors |
| CEN/TC 312/WG 2 | Factory made systems |
| CEN/TC 312/WG 3 | Thermal solar systems and components; Custom built systems |
| CEN/TC 313 | Centrifuges |
| CEN/TC 314 | Mastic asphalt for waterproofing |
| CEN/TC 315 | Spectator facilities |
| CEN/TC 317 | Derivatives from coal pyrolysis |
| CEN/TC 318 | Hydrometry |
| CEN/TC 319 | Maintenance |
| CEN/TC 319/WG 10 | Maintenance within physical asset management |
| CEN/TC 319/WG 9 | Qualification of personnel |
| CEN/TC 320 | Transport - Logistics and services |
| CEN/TC 321 | Explosives for civil uses |
| CEN/TC 322 | Equipments for making and shaping of metals - Safety requirements |
| CEN/TC 323 | Raised access floors |
| CEN/TC 323/SC 1 | Hollow floors |
| CEN/TC 325 | Crime prevention through building, facility and area design |
| CEN/TC 326 | Natural gas vehicles - Fuelling and operation |
| CEN/TC 327 | Animal feeding stuffs - Methods of sampling and analysis |
| CEN/TC 329 | Tourism services |
| CEN/TC 329/WG 3 | Recreational Diving Services |
| CEN/TC 33 | Doors, windows, shutters, building hardware and curtain walling |
| CEN/TC 33/WG 5 | Industrial, commercial and garage doors and gates |
| CEN/TC 330 | Qualification of construction enterprises |
| CEN/TC 331 | Postal services |
| CEN/TC 332 | Laboratory equipment |
| CEN/TC 333 | Cycles |
| CEN/TC 334 | Irrigation techniques |
| CEN/TC 335 | Solid biofuels |
| CEN/TC 336 | Bituminous binders |
| CEN/TC 337 | Road operation equipment and products |
| CEN/TC 337/WG 1 | Winter service equipment and products |
| CEN/TC 337/WG 2 | Road service area maintenance equipment |
| CEN/TC 337/WG 3 | Interface between vehicles and equipment |
| CEN/TC 337/WG 4 | Road surface cleaning equipment |
| CEN/TC 338 | Cereal and cereal products |
| CEN/TC 339 | Slip resistance of pedestrian surfaces - Methods of evaluation |
| CEN/TC 340 | Anti-seismic devices |
| CEN/TC 341 | Geotechnical Investigation and Testing |
| CEN/TC 342 | Metal hoses, hose assemblies, bellows and expansion joints |
| CEN/TC 343 | Solid recovered materials, including solid recovered fuels |
| CEN/TC 344 | Steel static storage systems |
| CEN/TC 346 | Conservation of Cultural Heritage |
| CEN/TC 346/WG 1 | General methodologies and terminology |
| CEN/TC 346/WG 11 | Conservation process |
| CEN/TC 346/WG 12 | Showcases |
| CEN/TC 346/WG 14 | Monitoring of cultural deposit |
| CEN/TC 346/WG 15 | Exhibition lighting of cultural heritage |
| CEN/TC 346/WG 16 | Specification for the management of moveable cultural heritage |
| CEN/TC 346/WG 3 | Porous inorganic materials constituting cultural heritage |
| CEN/TC 346/WG 7 | Specifying and measuring Indoor/outdoor climate |
| CEN/TC 346/WG 9 | Waterlogged wood |
| CEN/TC 347 | Methods for analysis of allergens |
| CEN/TC 348 | Facility Management |
| CEN/TC 349 | Sealants for joints in building construction |
| CEN/TC 350 | Sustainability of construction works |
| CEN/TC 351 | Construction Products - Assessment of release of dangerous substances |
| CEN/TC 352 | Nanotechnologies |
| CEN/TC 353 | Technologies supporting education and learning processes |
| CEN/TC 354 | Light motorized vehicles for the transportation of persons and goods and related facilities and not subject to type-approval for on-road use |
| CEN/TC 354/WG 1 | Single- track two wheeled motor vehicles |
| CEN/TC 354/WG 2 | All Terrain Vehicles (ATV s -Quads) and Side by Side Vehicles - Safety requirements and test methods |
| CEN/TC 354/WG 3 | Karts |
| CEN/TC 354/WG 4 | Light electric vehicles and self-balancing vehicles |
| CEN/TC 355 | Lighters |
| CEN/TC 357 | Stretched ceilings |
| CEN/TC 360 | Coating systems for chemical apparatus and plants against corrosion |
| CEN/TC 361 | Thick synthetic modified bitumous coating masses - Definitions and requirements/Test methods |
| CEN/TC 362 | Healthcare services - Quality management systems |
| CEN/TC 363 | Organic contaminants ('tar') in Biomass producer gases |
| CEN/TC 364 | High chairs and learning towers |
| CEN/TC 365 | Internet Filtering |
| CEN/TC 366 | Materials obtained from End-of-Life Tyres (ELT) |
| CEN/TC 367 | Breath-alcohol testers |
| CEN/TC 368 | Product Identification |
| CEN/TC 369 | Candle fire safety |
| CEN/TC 371 | Energy Performance of Buildings |
| CEN/TC 371/WG 1 | EPBD Standards group |
| CEN/TC 371/WG 2 | EPB CAG |
| CEN/TC 371/WG 3 | Development of EN 16798-1-1 |
| CEN/TC 371/WG 4 | Development of EN 16798-1-2 |
| CEN/TC 377 | Air Traffic Management |
| CEN/TC 38 | Durability of wood and wood-based products |
| CEN/TC 381 | Management consultancy services |
| CEN/TC 383 | Sustainably produced biomass for energy applications |
| CEN/TC 383/WG 3 | Biodiversity and Environmental aspects |
| CEN/TC 386 | Photocatalysis |
| CEN/TC 388 | Perimeter Protection |
| CEN/TC 389 | Innovation Management |
| CEN/TC 391 | Societal and Citizen Security |
| CEN/TC 392 | Cosmetics |
| CEN/TC 393 | Equipment for storage tanks and for service stations |
| CEN/TC 393/WG 2 | Leak detecting devices for tanks and pipes |
| CEN/TC 393/WG 3 | Overfill prevention devices for static tanks for liquid petroleum fuels |
| CEN/TC 393/WG 6 | Underground pipework systems for petrol filling stations |
| CEN/TC 395 | Engineering consultancy services |
| CEN/TC 396 | Earthworks |
| CEN/TC 397 | Baling presses - Safety requirements |
| CEN/TC 398 | Child Protective Products |
| CEN/TC 399 | Gas Turbines applications - Safety |
| CEN/TC 401 | Reduced Ignition Propensity Cigarettes |
| CEN/TC 402 | Domestic Pools and Spas |
| CEN/TC 402/WG 5 | Domestic pools - Environmental impacts |
| CEN/TC 403 | Aesthetic surgery and aesthetic non-surgical medical services |
| CEN/TC 406 | Mechanical products - Ecodesign methodology |
| CEN/TC 407 | Cylindrical helical springs made from round wire and bar - Calculation and design |
| CEN/TC 408 | Natural gas and biomethane for use in transport and biomethane for injection in the natural gas grid |
| CEN/TC 409 | Beauty Salon Services |
| CEN/TC 410 | Jewellery and precious metals |
| CEN/TC 411 | Bio-based products |
| CEN/TC 413 | Insulated means of transport for temperature sensitive goods with or without cooling and/or heating device |
| CEN/TC 413/WG 1 | Insulated means of transport for temperature sensitive goods - Equipment |
| CEN/TC 413/WG 2 | EN 16440 - devices |
| CEN/TC 415 | Sustainable and Traceable Cocoa |
| CEN/TC 419 | Forensic science processes |
| CEN/TC 421 | Emission safety of combustible air fresheners |
| CEN/TC 422 | Side curtains ventilation systems |
| CEN/TC 423 | Means of measuring and/or recording temperature in the cold chain |
| CEN/TC 426 | Domestic appliances used for water treatment not connected to water supply |
| CEN/TC 428 | ICT Professionalism and Digital Competences |
| CEN/TC 429 | Food hygiene - Commercial warewashing machines - Hygiene requirements and testing |
| CEN/TC 430 | Nuclear energy, nuclear technologies, and radiological protection |
| CEN/TC 431 | Service Chain for Social Care Alarms |
| CEN/TC 432 | Competency for Customs Representatives |
| CEN/TC 433 | Entertainment Technology - Machinery, equipment and installations |
| CEN/TC 434 | Electronic Invoicing |
| CEN/TC 435 | Tattooing services |
| CEN/TC 436 | Cabin Air Quality on civil aircraft - Chemical Agents |
| CEN/TC 437 | Electronic cigarettes and e-liquids |
| CEN/TC 438 | Additive Manufacturing |
| CEN/TC 439 | Private security services |
| CEN/TC 44 | Commercial and Professional Refrigerating Appliances and Systems, Performance and Energy Consumption |
| CEN/TC 44/WG 1 | Commercial refrigerated display cabinets |
| CEN/TC 44/WG 2 | Service refrigerated cabinets and counters for use in commercial kitchens |
| CEN/TC 44/WG 4 | Walk-in cold rooms |
| CEN/TC 44/WG 5 | Refrigerated display cabinets for artisan and self made gelato |
| CEN/TC 44/WG 6 | Commercial beverage coolers and ice cream freezers |
| CEN/TC 44/WG 7 | Walk-in cold rooms packaged Refrigerating Units |
| CEN/TC 440 | Electronic Public Procurement |
| CEN/TC 441 | Fuel labelling |
| CEN/TC 442 | Building Information Modelling (BIM) |
| CEN/TC 442/WG 1 | Terminology |
| CEN/TC 442/WG 2 | Exchange information |
| CEN/TC 442/WG 3 | Information Delivery Specification |
| CEN/TC 442/WG 4 | Support Dictionaries |
| CEN/TC 442/WG 6 | Infrastructure |
| CEN/TC 442/WG 7 | Horizontal role |
| CEN/TC 442/WG 8 | Competence |
| CEN/TC 443 | Feather and down |
| CEN/TC 444 | Environmental characterization of solid matrices |
| CEN/TC 445 | Digital information Interchange in the Insurance Industry |
| CEN/TC 447 | Horizontal standards for the provision of services |
| CEN/TC 448 | Funeral Services |
| CEN/TC 449 | Quality of care for older people |
| CEN/TC 450 | Patient involvement in person-centred care |
| CEN/TC 451 | Water wells and borehole heat exchangers |
| CEN/TC 451/WG 1 | Water wells |
| CEN/TC 451/WG 2 | Borehole heat exchangers |
| CEN/TC 452 | Assistance Dogs |
| CEN/TC 453 | Nutritional Supplements compatible with doping prevention |
| CEN/TC 454 | Algae and algae products |
| CEN/TC 455 | Plant Biostimulants |
| CEN/TC 456 | Online Gambling |
| CEN/TC 457 | Digital preservation of cinematographic works |
| CEN/TC 458 | Stirring and mixing industrial equipment |
| CEN/TC 459 | ECISS - European Committee for Iron and Steel Standardization |
| CEN/TC 459/SC 1 | Test methods for steel (other than chemical analysis) |
| CEN/TC 459/SC 10 | Steel tubes, and iron and steel fittings |
| CEN/TC 459/SC 10/WG 1 | Tubes for pressure purposes |
| CEN/TC 459/SC 10/WG 10 | Tubes for mechanical and general engineering purposes |
| CEN/TC 459/SC 10/WG 11 | Hygienic and aseptic stainless steel tubes, fittings and connections for food, pharmaceutical and chemical industries |
| CEN/TC 459/SC 10/WG 2 | Line pipe |
| CEN/TC 459/SC 10/WG 3 | Fittings |
| CEN/TC 459/SC 10/WG 5 | Tube for the conveyance of aqueous liquids |
| CEN/TC 459/SC 10/WG 6 | Tube threads and service tubes |
| CEN/TC 459/SC 10/WG 7 | Dimensions and tolerances |
| CEN/TC 459/SC 11 | Steel castings and forgings |
| CEN/TC 459/SC 12 | General issues |
| CEN/TC 459/SC 12/WG 5 | Revision of EN 10020:2000 |
| CEN/TC 459/SC 2 | Methods of chemical analysis for iron and steel |
| CEN/TC 459/SC 3 | Structural steels other than reinforcements |
| CEN/TC 459/SC 3/WG 1 | Sheet piles |
| CEN/TC 459/SC 3/WG 3 | Hollow sections |
| CEN/TC 459/SC 3/WG 4 | Dimensional standards for hot rolled flat products |
| CEN/TC 459/SC 3/WG 5 | Dimensional standards for cold rolled flat products |
| CEN/TC 459/SC 4 | Concrete reinforcing and prestressing steels |
| CEN/TC 459/SC 4/WG 1 | Weldable reinforcing steels |
| CEN/TC 459/SC 4/WG 2 | Galvanized reinforcing steels |
| CEN/TC 459/SC 4/WG 3 | Corrosion resistant reinforcing steels |
| CEN/TC 459/SC 4/WG 4 | Pre-stressing steels |
| CEN/TC 459/SC 4/WG 5 | Protected and sheathed strands for pre-stressing |
| CEN/TC 459/SC 5 | Steels for heat treatment, alloy steels, free-cutting steels and stainless steels |
| CEN/TC 459/SC 6 | Wire rod and wires |
| CEN/TC 459/SC 7 | Steels for pressure purposes |
| CEN/TC 459/SC 8 | Steel sheet and strip for electrical applications |
| CEN/TC 459/SC 9 | Coated and uncoated flat products to be used for cold forming |
| CEN/TC 459/WG 1 | Steel circular economy |
| CEN/TC 46 | Fireplaces for liquid fuels |
| CEN/TC 46/WG 1 | Oil stoves with vaporizing burners |
| CEN/TC 46/WG 2 | Fireplaces for Ethanol/Gel |
| CEN/TC 460 | Food Authenticity |
| CEN/TC 460/WG 6 | Stable Isotope Analysis |
| CEN/TC 461 | Public Procurement |
| CEN/TC 462 | Regulated chemicals in products |
| CEN/TC 463 | Microbiology of the food chain |
| CEN/TC 464 | Small Craft |
| CEN/TC 465 | Sustainable Cities and Communities |
| CEN/TC 466 | Circularity and recyclability of fishing gear and aquaculture equipment. |
| CEN/TC 467 | Climate Change |
| CEN/TC 468 | Preservation of digital information |
| CEN/TC 469 | Animal health diagnostic analyses |
| CEN/TC 47 | Atomizing oil burners and their components - Function - Safety - Testing |
| CEN/TC 47/WG 4 | Oil supply systems |
| CEN/TC 470 | Quality along the patient pathway in medical imaging |
| CEN/TC 48 | Domestic gas-fired water heaters |
| CEN/TC 49 | Gas cooking appliances |
| CEN/TC 50 | Lighting columns and spigots |
| CEN/TC 51 | Cement and building limes |
| CEN/TC 51/WG 11 | Building lime |
| CEN/TC 51/WG 15 | Test methods of cement and its constituents |
| CEN/TC 52 | Safety of toys |
| CEN/TC 53 | Temporary works equipment |
| CEN/TC 54 | Unfired pressure vessels |
| CEN/TC 54/WG 11 | Pressure equipment and components fabricated with additive manufacturing methods |
| CEN/TC 54/WG 5 | Accumulators |
| CEN/TC 54/WG 51 | A - Overall co-ordination, scope of standard and vessel classification |
| CEN/TC 54/WG 52 | B - Material selection |
| CEN/TC 54/WG 53 | C - Design methods |
| CEN/TC 54/WG 54 | D - Manufacture |
| CEN/TC 54/WG 55 | E - Inspection and testing |
| CEN/TC 54/WG 58 | G - Nodular cast iron vessels |
| CEN/TC 54/WG 59 | Creep |
| CEN/TC 54/WG 6 | Pressure vessels constructed from nickel or nickel alloys |
| CEN/TC 54/WG 60 | Aluminium |
| CEN/TC 54/WG 7 | Pressure vessels constructed from titanium and titanium alloys |
| CEN/TC 55 | Dentistry |
| CEN/TC 57 | Central heating boilers |
| CEN/TC 57/WG 1 | Central heating boilers for solid fuels |
| CEN/TC 57/WG 2 | Requirements for efficiency and emission and test methods for central heating boilers |
| CEN/TC 57/WG 4 | Low pressure boilers |
| CEN/TC 57/WG 5 | Heating boilers for fuel oil |
| CEN/TC 57/WG 6 | Airborne noise emissions |
| CEN/TC 57/WG 7 | Pellets burners and pellet burner/boiler units. |
| CEN/TC 57/WG 8 | Energy efficiency requirements for warm water storage tanks |
| CEN/TC 57/WG 9 | Electrical power consumption for heat generators |
| CEN/TC 58 | Safety and control devices for burners and appliances burning gaseous or liquid fuels |
| CEN/TC 62 | Independent gas-fired space heaters |
| CEN/TC 67 | Ceramic tiles |
| CEN/TC 69 | Industrial valves |
| CEN/TC 69/WG 1 | Basic standards |
| CEN/TC 69/WG 19 | Valves for hydrogen applications and network |
| CEN/TC 70 | Manual means of fire fighting equipment |
| CEN/TC 72 | Fire detection and fire alarm systems |
| CEN/TC 74 | Flanges and their joints |
| CEN/TC 79 | Respiratory protective devices |
| CEN/TC 79/SC 7 | Diving apparatus |
| CEN/TC 85 | Eye protective equipment |
| CEN/TC 88 | Thermal insulating materials and products |
| CEN/TC 88/WG 1 | Common general test methods |
| CEN/TC 88/WG 10 | Building equipment and industrial installations |
| CEN/TC 88/WG 11 | Vacuum insulation products (VIP) |
| CEN/TC 88/WG 12 | Prefabricated products of bonded expanded perlite |
| CEN/TC 88/WG 13 | Expanded cork boards (ICB) |
| CEN/TC 88/WG 16 | Factory production control |
| CEN/TC 88/WG 17 | Wood fibre boards (WF) |
| CEN/TC 88/WG 18 | External thermal insulation composite systems |
| CEN/TC 88/WG 19 | Polyethylene foam |
| CEN/TC 88/WG 2 | Coordinating group |
| CEN/TC 88/WG 20 | Expanded clay lightweight aggregates |
| CEN/TC 88/WG 21 | Reflective insulation products |
| CEN/TC 88/WG 22 | Factory made calcium silicate (CS) products |
| CEN/TC 88/WG 3 | Mineral wool |
| CEN/TC 88/WG 4 | Expanded polystyrene foam (EPS) |
| CEN/TC 88/WG 5 | Rigid cellular polystyrene, extruded |
| CEN/TC 88/WG 6 | Rigid cellular polyurethane and polyisocyanurate |
| CEN/TC 88/WG 7 | Rigid cellular phenolic foam |
| CEN/TC 88/WG 8 | Cellular glass (CG) |
| CEN/TC 88/WG 9 | Mineral bonded wood wool (including multi-layered products) |
| CEN/TC 89 | Thermal performance of buildings and building components |
| CEN/TC 89/WG 10 | Moisture |
| CEN/TC 89/WG 12 | Reflective insulation products |
| CEN/TC 89/WG 13 | In-situ thermal performance of construction products, building elements and structures |
| CEN/TC 89/WG 7 | Thermal properties of doors and windows |
| CEN/TC 92 | Water meters |
| CEN/TC 93 | Ladders |
| CEN/TC 98 | Lifting platforms |
| CEN/TC 98/WG 1 | Mobile elevating work platforms |
| CEN/TC 98/WG 3 | Vehicle lifting devices |
| CEN/TC 99 | Wallcoverings |
| SECT/SF EM | CEN-CLC/SF on Energy Management |
| TC ISO DI COMPETENZA | |
| IIW | International Institute of Welding |
| ISO/CASCO | Committee on conformity assessment |
| ISO/IEC JTC 1 | Information technology |
| ISO/IEC JTC 1/SC 17 | Cards and security devices for personal identification |
| ISO/IEC JTC 1/SC 2 | Coded character sets |
| ISO/IEC JTC 1/SC 22 | Programming languages, their environments and system software interfaces |
| ISO/IEC JTC 1/SC 23 | Digitally recorded media for information interchange and storage |
| ISO/IEC JTC 1/SC 24 | Computer graphics, image processing and environmental data representation |
| ISO/IEC JTC 1/SC 25 | Interconnection of information technology equipment |
| ISO/IEC JTC 1/SC 27 | Information security, cybersecurity and privacy protection |
| ISO/IEC JTC 1/SC 27/JWG 6 | Joint ISO/IEC JTC1/SC 27 - ISO/TC 22/SC 32 WG : Cybersecurity requirements and evaluation activities for connected vehicle devices |
| ISO/IEC JTC 1/SC 27/WG 1 | Information security management systems |
| ISO/IEC JTC 1/SC 27/WG 5 | Identity management and privacy technologies |
| ISO/IEC JTC 1/SC 28 | Office equipment |
| ISO/IEC JTC 1/SC 29 | Coding of audio, picture, multimedia and hypermedia information |
| ISO/IEC JTC 1/SC 31 | Automatic identification and data capture techniques |
| ISO/IEC JTC 1/SC 32 | Data management and interchange |
| ISO/IEC JTC 1/SC 34 | Document description and processing languages |
| ISO/IEC JTC 1/SC 35 | User interfaces |
| ISO/IEC JTC 1/SC 35/WG 6 | User interfaces accessibility |
| ISO/IEC JTC 1/SC 36 | Information technology for learning, education and training |
| ISO/IEC JTC 1/SC 37 | Biometrics |
| ISO/IEC JTC 1/SC 38 | Cloud computing and distributed platforms |
| ISO/IEC JTC 1/SC 39 | Sustainability, IT and data centres |
| ISO/IEC JTC 1/SC 40 | IT service management and IT governance |
| ISO/IEC JTC 1/SC 41 | Internet of things and digital twin |
| ISO/IEC JTC 1/SC 41/WG 6 | Digital twin |
| ISO/IEC JTC 1/SC 42 | Artificial intelligence |
| ISO/IEC JTC 1/SC 43 | Brain-computer interfaces |
| ISO/IEC JTC 1/SC 6 | Telecommunications and information exchange between systems |
| ISO/IEC JTC 1/SC 7 | Software and systems engineering |
| ISO/IEC JTC 1/WG 11 | Smart cities |
| ISO/IEC JTC 1/WG 12 | 3D Printing and scanning |
| ISO/IEC JTC 1/WG 14 | Quantum information technology |
| ISO/PC 250 | Sustainability in event management |
| ISO/PC 316 | Water efficient products - Rating |
| ISO/PC 317 | Consumer protection: privacy by design for consumer goods and services |
| ISO/PC 329 | Consumer incident investigation guideline |
| ISO/PC 335 | Guidelines for organizations to increase consumer understanding of online terms and conditions |
| ISO/PC 337 | Guidelines for the promotion and implementation of gender equality |
| ISO/PC 337/WG 1 | Guidelines for the promotion and implementation of gender equality |
| ISO/TC 1 | Screw threads |
| ISO/TC 10 | Technical product documentation |
| ISO/TC 10/SC 1 | Basic conventions |
| ISO/TC 10/SC 10 | Process plant documentation |
| ISO/TC 10/SC 6 | Mechanical engineering documentation |
| ISO/TC 10/SC 8 | Construction documentation |
| ISO/TC 10/WG 16 | 3D models: Presentation of product definition data |
| ISO/TC 10/WG 18 | Drawing and writing instruments |
| ISO/TC 10/WG 19 | Harmonization ISO 129 and ISO 128 series |
| ISO/TC 100 | Chains and chain sprockets for power transmission and conveyors |
| ISO/TC 101 | Continuous mechanical handling equipment |
| ISO/TC 102 | Iron ore and direct reduced iron |
| ISO/TC 102/SC 1 | Sampling |
| ISO/TC 102/SC 2 | Chemical analysis |
| ISO/TC 102/SC 3 | Physical testing |
| ISO/TC 104 | Freight containers |
| ISO/TC 104/SC 1 | General purpose containers |
| ISO/TC 104/SC 2 | Specific purpose containers |
| ISO/TC 104/SC 4 | Identification and communication |
| ISO/TC 105 | Steel wire ropes |
| ISO/TC 106 | Dentistry |
| ISO/TC 106/SC 1 | Filling and restorative materials |
| ISO/TC 106/SC 2 | Prosthodontic materials |
| ISO/TC 106/SC 3 | Terminology |
| ISO/TC 106/SC 4 | Dental instruments |
| ISO/TC 106/SC 6 | Dental equipment |
| ISO/TC 106/SC 7 | Oral care products |
| ISO/TC 106/SC 8 | Dental implants |
| ISO/TC 106/SC 9 | Dental CAD/CAM systems |
| ISO/TC 107 | Metallic and other inorganic coatings |
| ISO/TC 107/SC 3 | Electrodeposited coatings and related finishes |
| ISO/TC 107/SC 4 | Hot dip coatings (galvanized, etc.) |
| ISO/TC 107/SC 7 | Corrosion tests |
| ISO/TC 107/SC 8 | Chemical conversion coatings |
| ISO/TC 108 | Mechanical vibration, shock and condition monitoring |
| ISO/TC 108/SC 2 | Measurement and evaluation of mechanical vibration and shock as applied to machines, vehicles and structures |
| ISO/TC 108/SC 4 | Human exposure to mechanical vibration and shock |
| ISO/TC 108/SC 5 | Condition monitoring and diagnostics of machine systems |
| ISO/TC 108/SC 6 | Vibration and shock generating systems |
| ISO/TC 109 | Oil and gas burners |
| ISO/TC 109/WG 1 | Forced draught gas burners |
| ISO/TC 109/WG 2 | Forced draught oil burners |
| ISO/TC 11 | Boilers and pressure vessels |
| ISO/TC 110 | Industrial trucks |
| ISO/TC 110/SC 1 | General terminology |
| ISO/TC 110/SC 2 | Safety of powered industrial trucks |
| ISO/TC 110/SC 4 | Rough-terrain trucks |
| ISO/TC 110/SC 5 | Sustainability |
| ISO/TC 111 | Round steel link chains, chain slings, components and accessories |
| ISO/TC 111/SC 1 | Chains and chain slings |
| ISO/TC 111/SC 3 | Components and accessories |
| ISO/TC 112 | Vacuum technology |
| ISO/TC 113 | Hydrometry |
| ISO/TC 113/SC 1 | Velocity area methods |
| ISO/TC 113/SC 2 | Flow measurement structures |
| ISO/TC 113/SC 5 | Instruments, equipment and data management |
| ISO/TC 113/SC 6 | Sediment transport |
| ISO/TC 113/SC 8 | Ground water |
| ISO/TC 115 | Pumps |
| ISO/TC 115/SC 1 | Dimensions and technical specifications of pumps |
| ISO/TC 115/SC 2 | Methods of measurement and testing |
| ISO/TC 115/SC 3 | Installation and special application |
| ISO/TC 117 | Fans |
| ISO/TC 117/WG 10 | Vocabulary and definition of categories |
| ISO/TC 117/WG 11 | Energy efficiency classification |
| ISO/TC 117/WG 12 | System effect factors |
| ISO/TC 117/WG 13 | Jet fans |
| ISO/TC 117/WG 7 | Performance testing of fans |
| ISO/TC 117/WG 9 | Air curtain units |
| ISO/TC 118 | Compressors and pneumatic tools, machines and equipment |
| ISO/TC 118/SC 1 | Process compressors |
| ISO/TC 118/SC 3 | Pneumatic tools and machines |
| ISO/TC 118/SC 3/WG 3 | Vibrations in hand-held tools |
| ISO/TC 118/SC 3/WG 4 | Tightening of threaded fasteners |
| ISO/TC 118/SC 3/WG 7 | Safety of fastener driving tools |
| ISO/TC 118/SC 4 | Compressed air treatment technology |
| ISO/TC 118/SC 4/WG 1 | Compressed air purity specification and compressed air treatment equipment |
| ISO/TC 118/SC 6 | Air compressors and compressed air systems |
| ISO/TC 118/SC 6/WG 1 | Performance specifications |
| ISO/TC 118/SC 6/WG 2 | Safety |
| ISO/TC 118/SC 6/WG 4 | Energy management |
| ISO/TC 119 | Powder metallurgy |
| ISO/TC 119/SC 2 | Sampling and testing methods for powders (including powders for hardmetals) |
| ISO/TC 119/SC 3 | Sampling and testing methods for sintered metal materials (excluding hardmetals) |
| ISO/TC 119/SC 4 | Sampling and testing methods for hardmetals |
| ISO/TC 12 | Quantities and units |
| ISO/TC 120 | Leather |
| ISO/TC 120/SC 1 | Raw hides and skins, including pickled pelts |
| ISO/TC 120/SC 2 | Tanned leather |
| ISO/TC 120/SC 3 | Leather products |
| ISO/TC 121 | Anaesthetic and respiratory equipment |
| ISO/TC 121/SC 1 | Breathing attachments and anaesthetic machines |
| ISO/TC 121/SC 2 | Airways and related equipment |
| ISO/TC 121/SC 3 | Respiratory devices and related equipment used for patient care |
| ISO/TC 121/SC 4 | Vocabulary and semantics |
| ISO/TC 121/SC 6 | Medical gas supply systems |
| ISO/TC 121/SC 8 | Suction devices |
| ISO/TC 122 | Packaging |
| ISO/TC 122/SC 3 | Performance requirements and tests for means of packaging, packages and unit loads (as required by ISO/TC 122) |
| ISO/TC 122/SC 4 | Packaging and the environment |
| ISO/TC 123 | Plain bearings |
| ISO/TC 123/SC 2 | Materials and lubricants, their properties, characteristics, test methods and testing conditions |
| ISO/TC 123/SC 3 | Dimensions, tolerances and construction details |
| ISO/TC 123/SC 5 | Quality analysis and assurance |
| ISO/TC 123/SC 6 | Terms and common items |
| ISO/TC 126 | Tobacco and tobacco products |
| ISO/TC 126/SC 1 | Physical and dimensional tests |
| ISO/TC 126/SC 2 | Leaf tobacco |
| ISO/TC 126/SC 3 | Vape and vapour products |
| ISO/TC 127 | Earth-moving machinery |
| ISO/TC 127/SC 1 | Test methods relating to safety and machine performance |
| ISO/TC 127/SC 1/WG 5 | Visibility |
| ISO/TC 127/SC 2 | Safety, ergonomics and general requirements |
| ISO/TC 127/SC 2/WG 30 | Revision of 6683 |
| ISO/TC 127/SC 3 | Machine characteristics, electrical and electronic systems, operation and maintenance |
| ISO/TC 127/SC 4 | Terminology, commercial nomenclature, classification and ratings |
| ISO/TC 127/SC 4/WG 5 | Revision of ISO 6165 |
| ISO/TC 130 | Graphic technology |
| ISO/TC 131 | Fluid power systems |
| ISO/TC 131/SC 1 | Symbols, terminology and classifications |
| ISO/TC 131/SC 2 | Pumps, motors and integral transmissions |
| ISO/TC 131/SC 3 | Cylinders |
| ISO/TC 131/SC 4 | Connectors and similar products and components |
| ISO/TC 131/SC 4/WG 4 | Hydraulic and pneumatic quick-action couplings |
| ISO/TC 131/SC 5 | Control products and components |
| ISO/TC 131/SC 6 | Contamination control |
| ISO/TC 131/SC 7 | Sealing devices |
| ISO/TC 131/SC 8 | Product testing |
| ISO/TC 131/SC 9 | Installations and systems |
| ISO/TC 132 | Ferroalloys |
| ISO/TC 133 | Clothing sizing systems - size designation, size measurement methods and digital fittings |
| ISO/TC 134 | Fertilizers, soil conditioners and beneficial substances |
| ISO/TC 135 | Non-destructive testing |
| ISO/TC 135/SC 2 | Surface methods |
| ISO/TC 135/SC 3 | Ultrasonic testing |
| ISO/TC 135/SC 4 | Eddy current testing |
| ISO/TC 135/SC 5 | Radiographic testing |
| ISO/TC 135/SC 6 | Leak testing |
| ISO/TC 135/SC 7 | Personnel qualification |
| ISO/TC 135/SC 8 | Thermographic testing |
| ISO/TC 135/SC 9 | Acoustic emission testing |
| ISO/TC 136 | Furniture |
| ISO/TC 137 | Footwear sizing designations and marking systems |
| ISO/TC 138 | Plastics pipes, fittings and valves for the transport of fluids |
| ISO/TC 138/AG 0 | Advisory group |
| ISO/TC 138/SC 1 | Plastics pipes and fittings for soil, waste and drainage (including land drainage) |
| ISO/TC 138/SC 2 | Plastics pipes and fittings for water supplies |
| ISO/TC 138/SC 2/WG 1 | Plastics piping systems for hot and cold water applications |
| ISO/TC 138/SC 2/WG 3 | PVC piping systems for water supply |
| ISO/TC 138/SC 2/WG 4 | PE piping systems for water supply |
| ISO/TC 138/SC 3 | Plastics pipes and fittings for industrial applications |
| ISO/TC 138/SC 3/WG 7 | Revision of industrial application standards |
| ISO/TC 138/SC 4 | Plastics pipes and fittings for the supply of gaseous fuels |
| ISO/TC 138/SC 4/WG 1 | Mechanical fittings |
| ISO/TC 138/SC 4/WG 2 | Fusion of PE Pipe Systems |
| ISO/TC 138/SC 4/WG 3 | PE Pipe Systems |
| ISO/TC 138/SC 4/WG 7 | Polyamid Pipe Systems |
| ISO/TC 138/SC 5 | General properties of pipes, fittings and valves of plastic materials and their accessories -- Test methods and basic specifications |
| ISO/TC 138/SC 5/WG 17 | Alternative test methods |
| ISO/TC 138/SC 5/WG 20 | Slow crack growth (SCG) |
| ISO/TC 138/SC 5/WG 5 | Polyolefin pipes |
| ISO/TC 138/SC 6 | Reinforced plastics pipes and fittings for all applications |
| ISO/TC 138/SC 6/WG 1 | Methods of test |
| ISO/TC 138/SC 6/WG 3 | Specifications for pipe systems |
| ISO/TC 138/SC 6/WG 5 | Installation |
| ISO/TC 138/SC 7 | Valves and auxiliary equipment of plastics materials |
| ISO/TC 138/SC 8 | Rehabilitation of pipeline systems |
| ISO/TC 138/SC 8/WG 1 | Classification, general information and assessment of conformity items: ISO 11295, ISO/TS 23818-1, -2 & -3 & -4 |
| ISO/TC 138/SC 8/WG 2 | ystems for rehabilitation of drainage, sewerage and water supply networks items: ISO 11300-1 (PE material), -2 (Thermoset composite materials) and -3 (PVC-U material) |
| ISO/TC 138/SC 8/WG 3 | Plastics piping systems for rehabilitation of underground water supply networks |
| ISO/TC 138/SC 8/WG 4 | ystems for rehabilitation of gas supply networks items: ISO 11301-1 (PE material) |
| ISO/TC 14 | Shafts for machinery and accessories |
| ISO/TC 142 | Cleaning equipment for air and other gases |
| ISO/TC 142/JWG 10 | Joint ISO/TC 142 - ISO/TC 85/SC 2 WG: Aerosol filters for nuclear applications |
| ISO/TC 142/JWG 11 | Joint ISO/TC 142 - IEC/TC 59 WG: Portable room air cleaners for comfort applications |
| ISO/TC 142/WG 1 | Terminology |
| ISO/TC 142/WG 12 | Sustainability of air cleaning equipment and media |
| ISO/TC 142/WG 13 | Biological equipment for waste gas treatment |
| ISO/TC 142/WG 2 | UV-C technology |
| ISO/TC 142/WG 3 | General ventilation filters |
| ISO/TC 142/WG 4 | HEPA and ULPA filters |
| ISO/TC 142/WG 5 | Dust collectors, droplet separators and purifiers |
| ISO/TC 142/WG 7 | Cleanable filter media used in industrial applications |
| ISO/TC 142/WG 8 | Gas-phase air cleaning devices |
| ISO/TC 142/WG 9 | Particulate air filter intake systems for rotary machinery and stationary internal combustion engines |
| ISO/TC 145 | Graphical symbols |
| ISO/TC 145/SC 1 | Public information symbols |
| ISO/TC 145/SC 2 | Safety identification, signs, shapes, symbols and colours |
| ISO/TC 145/SC 3 | Graphical symbols for use on equipment |
| ISO/TC 146 | Air quality |
| ISO/TC 146/SC 1 | Stationary source emissions |
| ISO/TC 146/SC 2 | Workplace atmospheres |
| ISO/TC 146/SC 3 | Ambient atmospheres |
| ISO/TC 146/SC 4 | General aspects |
| ISO/TC 146/SC 5 | Meteorology |
| ISO/TC 146/SC 6 | Indoor air |
| ISO/TC 147 | Water quality |
| ISO/TC 147/SC 1 | Terminology |
| ISO/TC 147/SC 2 | Physical, chemical and biochemical methods |
| ISO/TC 147/SC 3 | Radioactivity measurements |
| ISO/TC 147/SC 4 | Microbiological methods |
| ISO/TC 147/SC 5 | Biological methods |
| ISO/TC 147/SC 6 | Sampling (general methods) |
| ISO/TC 149 | Cycles |
| ISO/TC 149/SC 1 | Cycles and major sub-assemblies |
| ISO/TC 150 | Implants for surgery |
| ISO/TC 150/SC 1 | Materials |
| ISO/TC 150/SC 2 | Cardiovascular implants and extracorporeal systems |
| ISO/TC 150/SC 4 | Bone and joint replacements |
| ISO/TC 150/SC 5 | Osteosynthesis and spinal devices |
| ISO/TC 150/SC 6 | Active implants |
| ISO/TC 153 | Valves |
| ISO/TC 153/WG 1 | Valve actuators and valve actuators attachments |
| ISO/TC 154 | Processes, data elements and documents in commerce, industry and administration |
| ISO/TC 154/WG 6 | Trusted eCommunications |
| ISO/TC 155 | Nickel and nickel alloys |
| ISO/TC 156 | Corrosion of metals and alloys |
| ISO/TC 156/SC 1 | Corrosion control engineering life cycle |
| ISO/TC 156/WG 10 | Cathodic protection of buried and immersed metallic structures |
| ISO/TC 157 | Non-systemic contraceptives and STI barrier prophylactics |
| ISO/TC 158 | Analysis of gases |
| ISO/TC 159 | Ergonomics |
| ISO/TC 159/SC 1 | General ergonomics principles |
| ISO/TC 159/SC 3 | Anthropometry and biomechanics |
| ISO/TC 159/SC 4 | Ergonomics of human-system interaction |
| ISO/TC 159/SC 5 | Ergonomics of the physical environment |
| ISO/TC 160 | Glass in building |
| ISO/TC 160/SC 1 | Product considerations |
| ISO/TC 161 | Controls and protective devices for gas and/or oil |
| ISO/TC 162 | Doors, windows and curtain walling |
| ISO/TC 163 | Thermal performance and energy use in the built environment |
| ISO/TC 163/SC 1 | Test and measurement methods |
| ISO/TC 163/SC 1/WG 15 | Thermography of buildings and industrial installations |
| ISO/TC 163/SC 1/WG 16 | In-situ measurement of thermal resistance and thermal transmittance of opaque building elements |
| ISO/TC 163/SC 1/WG 17 | Solar heat gain coefficient of windows and doors |
| ISO/TC 163/SC 1/WG 22 | Energy performance of underfloor air distribution systems |
| ISO/TC 163/SC 1/WG 8 | Moisture content and moisture permeability |
| ISO/TC 163/SC 2 | Calculation methods |
| ISO/TC 163/SC 2/WG 15 | Energy Performance calculation methods |
| ISO/TC 163/SC 3 | Thermal insulation products, components and systems |
| ISO/TC 163/SC 3/WG 11 | Vacuum insulation panels |
| ISO/TC 163/SC 3/WG 9 | Exterior insulation and finish systems |
| ISO/TC 163/WG 4 | Joint ISO/TC 163 - ISO/TC 205 WG: Energy performance of buildings using holistic approach |
| ISO/TC 164 | Mechanical testing of metals |
| ISO/TC 164/SC 1 | Uniaxial testing |
| ISO/TC 164/SC 2 | Ductility testing |
| ISO/TC 164/SC 3 | Hardness testing |
| ISO/TC 164/SC 4 | Fatigue, fracture and toughness testing |
| ISO/TC 165 | Timber structures |
| ISO/TC 166 | Ceramic ware, glassware and glass ceramic ware in contact with food |
| ISO/TC 167 | Steel and aluminium structures |
| ISO/TC 168 | Prosthetics and orthotics |
| ISO/TC 17 | Steel |
| ISO/TC 17/SC 1 | Methods of determination of chemical composition |
| ISO/TC 17/SC 10 | Steel for pressure purposes |
| ISO/TC 17/SC 11 | Steel castings |
| ISO/TC 17/SC 12 | Continuous mill flat rolled products |
| ISO/TC 17/SC 15 | Railway rails, rails fasteners, wheels and wheelsets |
| ISO/TC 17/SC 16 | Steels for the reinforcement and prestressing of concrete |
| ISO/TC 17/SC 16/WG 8 | Revision of ISO 15630-3 |
| ISO/TC 17/SC 17 | Steel wire rod and wire products |
| ISO/TC 17/SC 19 | Technical delivery conditions for steel tubes for pressure purposes |
| ISO/TC 17/SC 19/WG 1 | Non-destructive testing |
| ISO/TC 17/SC 20 | General technical delivery conditions, sampling and mechanical testing methods |
| ISO/TC 17/SC 3 | Steels for structural purposes |
| ISO/TC 17/SC 4 | Heat treatable and alloy steels |
| ISO/TC 17/SC 7 | Methods of testing (other than mechanical tests and chemical analysis) |
| ISO/TC 17/SC 9 | Tinplate and blackplate |
| ISO/TC 170 | Surgical instruments |
| ISO/TC 171 | Document management applications |
| ISO/TC 171/SC 1 | Quality, preservation and integrity of information |
| ISO/TC 171/SC 2 | Document file formats, EDMS systems and authenticity of information |
| ISO/TC 172 | Optics and photonics |
| ISO/TC 172/SC 7 | Ophthalmic optics and instruments |
| ISO/TC 172/SC 9 | Laser and electro-optical systems |
| ISO/TC 173 | Assistive products |
| ISO/TC 173/SC 1 | Wheelchairs |
| ISO/TC 173/SC 2 | Classification and terminology |
| ISO/TC 173/SC 3 | Aids for ostomy and incontinence |
| ISO/TC 173/SC 7 | Assistive products for persons with impaired sensory functions |
| ISO/TC 174 | Jewellery and precious metals |
| ISO/TC 176 | Quality management and quality assurance |
| ISO/TC 176/SC 1 | Concepts and terminology |
| ISO/TC 176/SC 2 | Quality systems |
| ISO/TC 176/SC 3 | Supporting technologies |
| ISO/TC 178 | Lifts, escalators and moving walks |
| ISO/TC 18 | Zinc and zinc alloys |
| ISO/TC 180 | Solar energy |
| ISO/TC 180/SC 1 | Climate - Measurement and data |
| ISO/TC 180/SC 4 | Systems - Thermal performance, reliability and durability |
| ISO/TC 180/WG 3 | Collector components and materials |
| ISO/TC 181 | Safety of toys |
| ISO/TC 182 | Geotechnics |
| ISO/TC 183 | Copper, lead, zinc and nickel ores and concentrates |
| ISO/TC 184 | Automation systems and integration |
| ISO/TC 184/SC 1 | Industrial cyber and physical device control |
| ISO/TC 184/SC 4 | Industrial data |
| ISO/TC 184/SC 5 | Interoperability, integration, and architectures for enterprise systems and automation applications |
| ISO/TC 185 | Safety devices for protection against excessive pressure |
| ISO/TC 185/WG 18 | Performance testing |
| ISO/TC 185/WG 19 | Safety devices for protection against excessive pressure -- Application, selection and installation of bursting disc safety devices |
| ISO/TC 186 | Cutlery and table and decorative metal hollow-ware |
| ISO/TC 188 | Small craft |
| ISO/TC 188/SC 1 | Personal safety equipment |
| ISO/TC 189 | Ceramic tile |
| ISO/TC 190 | Soil quality |
| ISO/TC 190/SC 3 | Chemical and physical characterization |
| ISO/TC 190/SC 4 | Biological characterization |
| ISO/TC 190/SC 7 | Impact assessment |
| ISO/TC 192 | Gas turbines |
| ISO/TC 192/WG 10 | Gas turbine safety |
| ISO/TC 192/WG 12 | Microturbines |
| ISO/TC 192/WG 4 | Gas turbine |
| ISO/TC 193 | Natural gas |
| ISO/TC 193/SC 1 | Analysis of natural gas |
| ISO/TC 193/WG 5 | Odorization |
| ISO/TC 194 | Biological and clinical evaluation of medical devices |
| ISO/TC 195 | Building construction machinery and equipment |
| ISO/TC 195/SC 1 | Machinery and equipment for concrete work |
| ISO/TC 195/SC 2 | Road operation machinery and associated equipment |
| ISO/TC 195/SC 3 | Drilling and foundation machinery and equipment |
| ISO/TC 197 | Hydrogen technologies |
| ISO/TC 197/TAB 1 | Technical Advisory Board |
| ISO/TC 197/WG 15 | Cylinders and tubes for stationary storage |
| ISO/TC 197/WG 24 | Gaseous hydrogen - Fuelling protocols for hydrogen-fuelled vehicles |
| ISO/TC 197/WG 5 | Gaseous hydrogen land vehicle refuelling connection devices |
| ISO/TC 198 | Sterilization of health care products |
| ISO/TC 199 | Safety of machinery |
| ISO/TC 2 | Fasteners |
| ISO/TC 2/SC 11 | Fasteners with metric external thread |
| ISO/TC 2/SC 12 | Fasteners with metric internal thread |
| ISO/TC 2/SC 13 | Fasteners with non-metric thread |
| ISO/TC 2/SC 14 | Surface coatings |
| ISO/TC 2/SC 7 | Reference standards |
| ISO/TC 2/WG 13 | Washer and non-threaded fasteners |
| ISO/TC 2/WG 17 | Stainless steel fasteners |
| ISO/TC 2/WG 18 | Pre-applied adhesive systems for threaded fasteners |
| ISO/TC 20 | Aircraft and space vehicles |
| ISO/TC 20/SC 1 | Aerospace electrical requirements |
| ISO/TC 20/SC 10 | Aerospace fluid systems and components |
| ISO/TC 20/SC 10/WG 6 | Couplings for rigid pipe |
| ISO/TC 20/SC 10/WG 8 | Hydraulic fluids and fluid contamination control |
| ISO/TC 20/SC 13 | Space data and information transfer systems |
| ISO/TC 20/SC 14 | Space systems and operations |
| ISO/TC 20/SC 16 | Unmanned aircraft systems |
| ISO/TC 20/SC 17 | Airport infrastructure |
| ISO/TC 20/SC 4 | Aerospace fastener systems |
| ISO/TC 20/SC 9 | Air cargo and ground equipment |
| ISO/TC 201 | Surface chemical analysis |
| ISO/TC 201/SC 1 | Terminology |
| ISO/TC 201/SC 10 | X-ray Reflectometry (XRR) and X-ray Fluorescence (XRF) Analysis |
| ISO/TC 201/SC 3 | Data management and treatment |
| ISO/TC 201/SC 4 | Depth profiling |
| ISO/TC 201/SC 6 | Secondary ion mass spectrometry |
| ISO/TC 201/SC 7 | Electron spectroscopies |
| ISO/TC 201/SC 8 | Glow discharge spectroscopy |
| ISO/TC 201/SC 9 | Scanning probe microscopy |
| ISO/TC 202 | Microbeam analysis |
| ISO/TC 202/SC 2 | Electron probe microanalysis |
| ISO/TC 202/SC 3 | Analytical electron microscopy |
| ISO/TC 204 | Intelligent transport systems |
| ISO/TC 204/WG 10 | Traveller information systems |
| ISO/TC 204/WG 14 | Vehicle/roadway warning and control systems |
| ISO/TC 204/WG 18 | Cooperative systems |
| ISO/TC 204/WG 19 | Mobility integration |
| ISO/TC 204/WG 3 | ITS geographic data |
| ISO/TC 204/WG 5 | Fee and toll collection |
| ISO/TC 204/WG 8 | Public transport/emergency |
| ISO/TC 204/WG 9 | Integrated transport information, management and control |
| ISO/TC 205 | Building environment design |
| ISO/TC 205/WG 1 | General principles |
| ISO/TC 205/WG 10 | Commissioning |
| ISO/TC 205/WG 2 | Design of energy-efficient buildings |
| ISO/TC 205/WG 3 | Building Automation and Control System (BACS) Design |
| ISO/TC 205/WG 7 | Indoor visual environment |
| ISO/TC 205/WG 8 | Radiant heating and cooling systems |
| ISO/TC 205/WG 9 | Heating and cooling systems |
| ISO/TC 206 | Fine ceramics |
| ISO/TC 206/WG 9 | Photocatalysis |
| ISO/TC 207 | Environmental management |
| ISO/TC 207/SC 1 | Environmental management systems |
| ISO/TC 207/SC 2 | Environmental auditing and related environmental investigations |
| ISO/TC 207/SC 3 | Environmental labelling |
| ISO/TC 207/SC 4 | Environmental performance evaluation |
| ISO/TC 207/SC 5 | Life cycle assessment |
| ISO/TC 207/SC 7 | Greenhouse gas and climate change management and related activities |
| ISO/TC 209 | Cleanrooms and associated controlled environments |
| ISO/TC 21 | Equipment for fire protection and fire fighting |
| ISO/TC 21/SC 11 | Smoke and heat control systems and components |
| ISO/TC 21/SC 2 | Manually transportable fire extinguishers |
| ISO/TC 21/SC 3 | Fire detection and alarm systems |
| ISO/TC 21/SC 5 | Fixed firefighting systems using water |
| ISO/TC 21/SC 6 | Foam and powder media and firefighting systems using foam and powder |
| ISO/TC 21/SC 8 | Gaseous media and firefighting systems using gas |
| ISO/TC 210 | Quality management and corresponding general aspects for medical devices |
| ISO/TC 211 | Geographic information/Geomatics |
| ISO/TC 212 | Clinical laboratory testing and in vitro diagnostic test systems |
| ISO/TC 213 | Dimensional and geometrical product specifications and verification |
| ISO/TC 213/AG 1 | Strategy and planning |
| ISO/TC 213/AG 12 | Mathematical support group |
| ISO/TC 213/AG 13 | Identification of user needs |
| ISO/TC 213/AG 2 | Auditing |
| ISO/TC 213/WG 10 | Coordinate measuring machines |
| ISO/TC 213/WG 12 | Size |
| ISO/TC 213/WG 14 | Vertical GPS principles |
| ISO/TC 213/WG 15 | GPS extraction and filtration techniques |
| ISO/TC 213/WG 16 | Areal and profile surface texture |
| ISO/TC 213/WG 17 | Facilitation of GPS implementation |
| ISO/TC 213/WG 18 | Geometrical tolerancing |
| ISO/TC 213/WG 2 | Datums and datum systems |
| ISO/TC 213/WG 4 | Uncertainty of measurement and decision rules |
| ISO/TC 213/WG 6 | General requirements for geometrical product specification (GPS) measuring equipment |
| ISO/TC 213/WG 9 | Dimensional and geometrical tolerancing for castings |
| ISO/TC 214 | Elevating work platforms |
| ISO/TC 215 | Health informatics |
| ISO/TC 215/WG 1 | Architecture, Frameworks and Models |
| ISO/TC 215/WG 2 | Systems and Device Interoperability |
| ISO/TC 215/WG 3 | Semantic content |
| ISO/TC 215/WG 4 | Security, Safety and Privacy |
| ISO/TC 215/WG 6 | Pharmacy and medicines business |
| ISO/TC 216 | Footwear |
| ISO/TC 217 | Cosmetics |
| ISO/TC 218 | Timber |
| ISO/TC 219 | Floor coverings |
| ISO/TC 22 | Road vehicles |
| ISO/TC 22/SAG | Strategic advisory group |
| ISO/TC 22/SC 31 | Data communication |
| ISO/TC 22/SC 31/JWG 1 | Joint ISO/TC 22/SC 31 - IEC/TC 69 WG: Vehicle to grid communication interface (V2G CI) |
| ISO/TC 22/SC 31/WG 2 | Vehicle diagnostic protocols |
| ISO/TC 22/SC 31/WG 3 | In-vehicle networks |
| ISO/TC 22/SC 31/WG 4 | Network applications |
| ISO/TC 22/SC 31/WG 5 | Test equipment/Data eXchange Formats |
| ISO/TC 22/SC 31/WG 6 | Extended vehicle/Remote diagnostics |
| ISO/TC 22/SC 31/WG 9 | Sensor data interface for automated driving functions |
| ISO/TC 22/SC 32 | Electrical and electronic components and general system aspects |
| ISO/TC 22/SC 32/WG 1 | Ignition Equipment |
| ISO/TC 22/SC 32/WG 10 | Optical components - Test methods and requirements |
| ISO/TC 22/SC 32/WG 11 | Cybersecurity |
| ISO/TC 22/SC 32/WG 12 | Software update |
| ISO/TC 22/SC 32/WG 13 | Safety for driving automation systems |
| ISO/TC 22/SC 32/WG 14 | Safety and Artificial Intelligence |
| ISO/TC 22/SC 32/WG 2 | Environmental conditions |
| ISO/TC 22/SC 32/WG 3 | Electromagnetic compatibility |
| ISO/TC 22/SC 32/WG 4 | Automotive electrical cables |
| ISO/TC 22/SC 32/WG 5 | Fuses and circuit breakers |
| ISO/TC 22/SC 32/WG 6 | On-board electrical connections |
| ISO/TC 22/SC 32/WG 8 | Functional safety |
| ISO/TC 22/SC 32/WG 9 | Electrical connections between towing and towed vehicles |
| ISO/TC 22/SC 33 | Vehicle dynamics, chassis components and driving automation systems testing |
| ISO/TC 22/SC 33/WG 10 | Brake linings and friction couples |
| ISO/TC 22/SC 33/WG 11 | Simulation |
| ISO/TC 22/SC 33/WG 14 | Brake fluids |
| ISO/TC 22/SC 33/WG 15 | Field load specification for brake modulation systems |
| ISO/TC 22/SC 33/WG 16 | Active Safety test equipment |
| ISO/TC 22/SC 33/WG 2 | Vehicle dynamics of passenger cars |
| ISO/TC 22/SC 33/WG 3 | Driver assistance and active safety functions |
| ISO/TC 22/SC 33/WG 5 | Wheels |
| ISO/TC 22/SC 33/WG 6 | Vehicle dynamics of heavy commercial vehicles and buses |
| ISO/TC 22/SC 33/WG 9 | Test scenarios of automated driving systems |
| ISO/TC 22/SC 34 | Propulsion, powertrain and powertrain fluids |
| ISO/TC 22/SC 34/AG 1 | Paraffinic Fuel Lubricity |
| ISO/TC 22/SC 34/WG 1 | Fuel filters |
| ISO/TC 22/SC 34/WG 11 | Separator performance, laboratory and engine test methods for crankcase ventilation systems |
| ISO/TC 22/SC 34/WG 3 | Air filters |
| ISO/TC 22/SC 34/WG 6 | Water injection |
| ISO/TC 22/SC 35 | Lighting and visibility |
| ISO/TC 22/SC 35/WG 1 | Lighting and light-signalling |
| ISO/TC 22/SC 35/WG 2 | Safety glazing |
| ISO/TC 22/SC 35/WG 3 | Visibility |
| ISO/TC 22/SC 36 | Safety and impact testing |
| ISO/TC 22/SC 36/WG 1 | Car collision test procedures |
| ISO/TC 22/SC 36/WG 2 | Child restraint systems |
| ISO/TC 22/SC 36/WG 3 | Instrumentation |
| ISO/TC 22/SC 36/WG 5 | Anthropomorphic test devices |
| ISO/TC 22/SC 36/WG 6 | Performance criteria expressed in biomechanical terms |
| ISO/TC 22/SC 36/WG 7 | Traffic accident analysis methodology |
| ISO/TC 22/SC 37 | Electrically propelled vehicles |
| ISO/TC 22/SC 37/WG 1 | Safety aspects and terminology |
| ISO/TC 22/SC 37/WG 2 | Performance and energy consumption |
| ISO/TC 22/SC 37/WG 3 | Rechargeable energy storage |
| ISO/TC 22/SC 37/WG 4 | Systems and components connected to electric propulsion systems |
| ISO/TC 22/SC 37/WG 5 | Requirements for energy transfer |
| ISO/TC 22/SC 37/WG 6 | Charging performance |
| ISO/TC 22/SC 38 | Motorcycles and mopeds |
| ISO/TC 22/SC 38/WG 1 | Pollution and energy |
| ISO/TC 22/SC 38/WG 2 | Electric mopeds and motorcycles |
| ISO/TC 22/SC 38/WG 3 | Functional safety |
| ISO/TC 22/SC 38/WG 5 | Controls |
| ISO/TC 22/SC 39 | Ergonomics |
| ISO/TC 22/SC 39/WG 3 | Controls, displays, and tell-tale localization |
| ISO/TC 22/SC 39/WG 5 | Symbols |
| ISO/TC 22/SC 39/WG 7 | Hand reach and R and H point determination |
| ISO/TC 22/SC 39/WG 8 | TICS on-board-MMI |
| ISO/TC 22/SC 40 | Specific aspects for light and heavy commercial vehicles, busses and trailers |
| ISO/TC 22/SC 40/WG 1 | Mechanical couplings |
| ISO/TC 22/SC 40/WG 3 | Negative pressure compartment for ambulances |
| ISO/TC 22/SC 41 | Specific aspects for gaseous fuels |
| ISO/TC 22/SC 41/JWG 5 | Joint ISO/TC 22/SC 41 - ISO/TC 197 WG: Fuel system components and refuelling connector for vehicles propelled by blends of natural gas and hydrogen |
| ISO/TC 22/SC 41/WG 3 | Fuel system components and refuelling connector for vehicles propelled by gaseous fuel |
| ISO/TC 22/SC 41/WG 4 | Fuel system components and refuelling connector for vehicles propelled by Liquefied Natural Gas (LNG) |
| ISO/TC 22/SC 41/WG 6 | Fuel system components and refuelling connector for vehicles propelled by Liquefied Petroleum Gas (LPG) |
| ISO/TC 22/SC 41/WG 7 | General safety requirements for gaseous fuelled vehicles and terminology |
| ISO/TC 22/SC 41/WG 8 | Fuel system components and refueling connector for vehicles propelled by Dimethyl Ether (DME) |
| ISO/TC 22/SC 41/WG 9 | Training, competence and conformity assessment |
| ISO/TC 220 | Cryogenic vessels |
| ISO/TC 221 | Geosynthetics |
| ISO/TC 221/WG 3 | Mechanical properties |
| ISO/TC 222 | Personal financial planning |
| ISO/TC 224 | Drinking water, wastewater and stormwater systems and services |
| ISO/TC 225 | Market, opinion and social research |
| ISO/TC 226 | Materials for the production of primary aluminium |
| ISO/TC 227 | Springs |
| ISO/TC 228 | Tourism and related services |
| ISO/TC 228/WG 1 | Diving services |
| ISO/TC 228/WG 20 | Exhibition and Convention |
| ISO/TC 229 | Nanotechnologies |
| ISO/TC 23 | Tractors and machinery for agriculture and forestry |
| ISO/TC 23/SC 13 | Powered lawn and garden equipment |
| ISO/TC 23/SC 14 | Operator controls, operator symbols and other displays, operator manuals |
| ISO/TC 23/SC 15 | Machinery for forestry |
| ISO/TC 23/SC 17 | Manually portable (hand-held) powered lawn and garden equipment and forest machinery |
| ISO/TC 23/SC 18 | Irrigation and drainage equipment and systems |
| ISO/TC 23/SC 19 | Agricultural electronics |
| ISO/TC 23/SC 2 | Common tests |
| ISO/TC 23/SC 3 | Safety and comfort |
| ISO/TC 23/SC 4 | Tractors |
| ISO/TC 23/SC 6 | Equipment for crop protection |
| ISO/TC 23/SC 7 | Equipment for harvesting and conservation |
| ISO/TC 232 | Education and learning services |
| ISO/TC 234 | Fisheries and aquaculture |
| ISO/TC 238 | Solid biofuels |
| ISO/TC 238/WG 1 | Terminology |
| ISO/TC 238/WG 2 | Fuel specifications and classes |
| ISO/TC 238/WG 4 | Physical and mechanical test methods |
| ISO/TC 238/WG 5 | Chemical test methods |
| ISO/TC 238/WG 6 | Sampling and sample preparation |
| ISO/TC 238/WG 7 | Safety of solid biofuels |
| ISO/TC 241 | Road traffic safety management systems |
| ISO/TC 244 | Industrial furnaces and associated processing equipment |
| ISO/TC 244/WG 1 | General safety requirements |
| ISO/TC 244/WG 2 | Safety requirements for combustion and fuel handling systems |
| ISO/TC 244/WG 3 | Method of energy balance and efficiency |
| ISO/TC 244/WG 4 | Vocabulary |
| ISO/TC 244/WG 5 | Protective system |
| ISO/TC 244/WG 6 | Safety requirements for generation and use of protective and reactive gases |
| ISO/TC 244/WG 7 | Safety Requirements for Steelmaking Equipment |
| ISO/TC 249 | Traditional Chinese medicine |
| ISO/TC 25 | Cast irons and pig irons |
| ISO/TC 251 | Asset management |
| ISO/TC 254 | Safety of amusement rides and amusement devices |
| ISO/TC 255 | Biogas |
| ISO/TC 255/WG 1 | Terms, definitions and classification scheme for the production, conditioning and utilization of biogas |
| ISO/TC 256 | Pigments, dyestuffs and extenders |
| ISO/TC 258 | Project, programme and portfolio management |
| ISO/TC 26 | Copper and copper alloys |
| ISO/TC 260 | Human resource management |
| ISO/TC 261 | Additive manufacturing |
| ISO/TC 262 | Risk management |
| ISO/TC 264 | Fireworks |
| ISO/TC 265 | Carbon dioxide capture, transportation, and geological storage |
| ISO/TC 267 | Facility management |
| ISO/TC 268 | Sustainable cities and communities |
| ISO/TC 268/SC 1 | Smart community infrastructures |
| ISO/TC 268/SC 1/WG 7 | Utility tunnel |
| ISO/TC 268/SC 2 | Sustainable cities and communities - Sustainable mobility and transportation |
| ISO/TC 269 | Railway applications |
| ISO/TC 269/SC 1 | Infrastructure |
| ISO/TC 269/SC 2 | Rolling stock |
| ISO/TC 269/SC 3 | Operations and services |
| ISO/TC 27 | Coal and coke |
| ISO/TC 27/SC 1 | Coal preparation: Terminology and performance |
| ISO/TC 27/SC 3 | Coke |
| ISO/TC 27/SC 4 | Sampling |
| ISO/TC 27/SC 5 | Methods of analysis |
| ISO/TC 270 | Plastics and rubber machines |
| ISO/TC 272 | Forensic sciences |
| ISO/TC 274 | Light and lighting |
| ISO/TC 274/JWG 1 | Energy performance of lighting in buildings (joint working group with CIE-JTC 6) |
| ISO/TC 274/JWG 5 | Lighting for work places (joint working group with CIE-JTC 15) |
| ISO/TC 274/WG 2 | Commissioning process of lighting systems |
| ISO/TC 275 | Sludge recovery, recycling, treatment and disposal |
| ISO/TC 276 | Biotechnology |
| ISO/TC 279 | Innovation management |
| ISO/TC 28 | Petroleum and related products, fuels and lubricants from natural or synthetic sources |
| ISO/TC 28/SC 2 | Measurement of petroleum and related products |
| ISO/TC 28/SC 4 | Classifications and specifications |
| ISO/TC 28/SC 5 | Measurement of refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels |
| ISO/TC 28/SC 7 | Liquid Biofuels |
| ISO/TC 282 | Water reuse |
| ISO/TC 283 | Occupational health and safety management |
| ISO/TC 286 | Collaborative business relationship management |
| ISO/TC 287 | Sustainable processes for wood and wood-based products |
| ISO/TC 289 | Brand evaluation |
| ISO/TC 29 | Small tools |
| ISO/TC 29/SC 10 | Assembly tools for screws and nuts, pliers and nippers |
| ISO/TC 29/SC 5 | Grinding wheels and abrasives |
| ISO/TC 29/SC 8 | Tools for pressing and moulding |
| ISO/TC 29/SC 9 | Tools with defined cutting edges, holding tools, cutting items, adaptive items and interfaces |
| ISO/TC 290 | Online reputation |
| ISO/TC 291 | Domestic gas cooking appliances |
| ISO/TC 292 | Security and resilience |
| ISO/TC 293 | Feed machinery |
| ISO/TC 295 | Audit data services |
| ISO/TC 296 | Bamboo and rattan |
| ISO/TC 297 | Waste collection and transportation management |
| ISO/TC 298 | Rare earth |
| ISO/TC 299 | Robotics |
| ISO/TC 30 | Measurement of fluid flow in closed conduits |
| ISO/TC 30/SC 2 | Pressure differential devices |
| ISO/TC 30/SC 5 | Velocity and mass methods |
| ISO/TC 30/SC 7 | Volume methods including water meters |
| ISO/TC 300 | Solid recovered materials, including solid recovered fuels |
| ISO/TC 300/WG 2 | Specification and classes |
| ISO/TC 300/WG 4 | Physical and mechanical tests |
| ISO/TC 300/WG 5 | Chemical tests and determination of biomass content |
| ISO/TC 300/WG 6 | Safety of solid recovered fuels |
| ISO/TC 301 | Energy management and energy savings |
| ISO/TC 301/CAG | Chair's Advisory Group |
| ISO/TC 301/TG 2 | Communication Task Group |
| ISO/TC 301/TG 3 | Terminology Task group |
| ISO/TC 301/WG 1 | Energy management |
| ISO/TC 301/WG 2 | Metrics and measurement internal to the organization |
| ISO/TC 304 | Healthcare organization management |
| ISO/TC 306 | Foundry machinery |
| ISO/TC 307 | Blockchain and distributed ledger technologies |
| ISO/TC 308 | Chain of custody |
| ISO/TC 309 | Governance of organizations |
| ISO/TC 31 | Tyres, rims and valves |
| ISO/TC 31/SC 10 | Cycle, moped, motorcycle tyres and rims |
| ISO/TC 31/SC 3 | Passenger car tyres and rims |
| ISO/TC 31/SC 3/WG 19 | Runflat tyre system capabilities |
| ISO/TC 31/SC 4 | Truck and bus tyres and rims |
| ISO/TC 31/SC 5 | Agricultural tyres and rims |
| ISO/TC 31/SC 6 | Off-the-road tyres and rims |
| ISO/TC 31/SC 7 | Industrial tyres and rims |
| ISO/TC 31/SC 9 | Valves for tube and tubeless tyres |
| ISO/TC 31/WG 8 | Methods for measuring snow and ice grip performance |
| ISO/TC 310 | Child care articles |
| ISO/TC 312 | Excellence in service |
| ISO/TC 313 | Packaging machinery |
| ISO/TC 314 | Ageing societies |
| ISO/TC 315 | Cold chain logistics |
| ISO/TC 321 | Transaction assurance in E-commerce |
| ISO/TC 322 | Sustainable finance |
| ISO/TC 323 | Circular economy |
| ISO/TC 323/WG 1 | Terminology, principles, frameworks and management system standard |
| ISO/TC 323/WG 2 | Practical approaches to develop and implement Circular Economy |
| ISO/TC 323/WG 3 | Measuring and assessing circularity |
| ISO/TC 323/WG 4 | Circular Economy in practice: experience feedback |
| ISO/TC 323/WG 5 | Product circularity data sheet |
| ISO/TC 324 | Sharing economy |
| ISO/TC 326 | Machinery intended for use with foodstuffs |
| ISO/TC 327 | Natural stones |
| ISO/TC 328 | Engineered stones |
| ISO/TC 33 | Refractories |
| ISO/TC 330 | Surfaces with biocidal and antimicrobial properties |
| ISO/TC 331 | Biodiversity |
| ISO/TC 332 | Security equipment for financial institutions and commercial organizations |
| ISO/TC 333 | Lithium |
| ISO/TC 334 | Reference materials |
| ISO/TC 336 | Laboratory design |
| ISO/TC 338 | Menstrual products |
| ISO/TC 339 | Small hydropower plants |
| ISO/TC 34 | Food products |
| ISO/TC 34/SC 10 | Animal feeding stuffs |
| ISO/TC 34/SC 11 | Animal and vegetable fats and oils |
| ISO/TC 34/SC 12 | Sensory analysis |
| ISO/TC 34/SC 15 | Coffee |
| ISO/TC 34/SC 16 | Horizontal methods for molecular biomarker analysis |
| ISO/TC 34/SC 17 | Management systems for food safety |
| ISO/TC 34/SC 19 | Bee products |
| ISO/TC 34/SC 2 | Oleaginous seeds and fruits and oilseed meals |
| ISO/TC 34/SC 3 | Fruits and vegetables and their derived products |
| ISO/TC 34/SC 4 | Cereals and pulses |
| ISO/TC 34/SC 5 | Milk and milk products |
| ISO/TC 34/SC 6 | Meat, poultry, fish, eggs and their products |
| ISO/TC 34/SC 7 | Spices, culinary herbs and condiments |
| ISO/TC 34/SC 9 | Microbiology |
| ISO/TC 340 | Natural gas fuelling stations |
| ISO/TC 341 | Heat supply network |
| ISO/TC 35 | Paints and varnishes |
| ISO/TC 35/SC 12 | Preparation of steel substrates before application of paints and related products |
| ISO/TC 35/SC 14 | Protective paint systems for steel structures |
| ISO/TC 35/SC 16 | Chemical analysis |
| ISO/TC 35/SC 9 | General test methods for paints and varnishes |
| ISO/TC 36 | Cinematography |
| ISO/TC 37 | Language and terminology |
| ISO/TC 37/SC 1 | Principles and methods |
| ISO/TC 37/SC 2 | Terminology workflow and language coding |
| ISO/TC 37/SC 3 | Management of terminology resources |
| ISO/TC 37/SC 4 | Language resource management |
| ISO/TC 37/SC 5 | Translation, interpreting and related technology |
| ISO/TC 38 | Textiles |
| ISO/TC 38/SC 1 | Tests for coloured textiles and colorants |
| ISO/TC 38/SC 2 | Cleansing, finishing and water resistance tests |
| ISO/TC 38/SC 2/WG 12 | Care labelling |
| ISO/TC 38/SC 20 | Fabric descriptions |
| ISO/TC 38/SC 23 | Fibres and yarns |
| ISO/TC 38/SC 23/WG 5 | Fibres - Natural proteins |
| ISO/TC 38/SC 24 | Conditioning atmospheres and physical tests for textile fabrics |
| ISO/TC 38/SC 24/WG 2 | Fabrics - Physical Tests |
| ISO/TC 38/SC 24/WG 5 | Digital measurement of fabric appearance |
| ISO/TC 38/WG 22 | Composition and chemical testing |
| ISO/TC 38/WG 33 | Animal welfare in the textile supply chain |
| ISO/TC 38/WG 34 | Microplastics from textile sources |
| ISO/TC 38/WG 35 | Environmental aspects |
| ISO/TC 39 | Machine tools |
| ISO/TC 39/SC 10 | Safety |
| ISO/TC 39/SC 10/WG 1 | Metal forming machines |
| ISO/TC 39/SC 2 | Test conditions for metal cutting machine tools |
| ISO/TC 39/SC 4 | Woodworking machines |
| ISO/TC 39/SC 6 | Noise of machine tools |
| ISO/TC 39/SC 8 | Work holding spindles and chucks |
| ISO/TC 39/WG 12 | Environmental evaluation of machine tools |
| ISO/TC 4 | Rolling bearings |
| ISO/TC 4/SC 11 | Linear motion rolling bearings |
| ISO/TC 4/SC 4 | Rolling bearings - Geometrical product specifications (GPS) |
| ISO/TC 4/SC 5 | Needle, cylindrical and spherical roller bearings |
| ISO/TC 4/SC 6 | Insert bearings |
| ISO/TC 4/SC 7 | Spherical plain bearings |
| ISO/TC 4/SC 8 | Load ratings and life |
| ISO/TC 41 | Pulleys and belts (including veebelts) |
| ISO/TC 41/SC 1 | Friction |
| ISO/TC 41/SC 3 | Conveyor belts |
| ISO/TC 41/SC 4 | Synchronous belt drives |
| ISO/TC 42 | Photography |
| ISO/TC 43 | Acoustics |
| ISO/TC 43/SC 1 | Noise |
| ISO/TC 43/SC 1/WG 27 | Joint ISO/TC 43/SC 1 - ISO/TC 22 WG: Effect of temperature on tyre/road noise testing |
| ISO/TC 43/SC 1/WG 28 | Basic machinery noise emission standards |
| ISO/TC 43/SC 1/WG 33 | Measuring method for comparing traffic noise on different road surfaces |
| ISO/TC 43/SC 1/WG 42 | Joint ISO/TC 43/SC 1 - ISO/TC 22 WG: Measurement of noise emission (external) from road vehicles |
| ISO/TC 43/SC 1/WG 58 | Revision of ISO 5135 - Sound power levels of air-terminal devices |
| ISO/TC 43/SC 1/WG 67 | Revision of ISO 9612 - Determination of occupational noise exposure |
| ISO/TC 43/SC 2 | Building acoustics |
| ISO/TC 43/SC 2/WG 18 | Measurement of sound insulation in buildings and of building elements |
| ISO/TC 43/SC 2/WG 29 | Acoustic classification scheme for buildings |
| ISO/TC 43/SC 2/WG 32 | Determination of acoustical parameters of materials |
| ISO/TC 43/SC 2/WG 35 | Sound absorption |
| ISO/TC 43/SC 3 | Underwater acoustics |
| ISO/TC 44 | Welding and allied processes |
| ISO/TC 44/SC 10 | Quality management in the field of welding |
| ISO/TC 44/SC 11 | Qualification requirements for welding and allied processes personnel |
| ISO/TC 44/SC 12 | Soldering materials |
| ISO/TC 44/SC 13 | Brazing materials and processes |
| ISO/TC 44/SC 14 | Welding and brazing in aerospace |
| ISO/TC 44/SC 3 | Welding consumables |
| ISO/TC 44/SC 5 | Testing and inspection of welds |
| ISO/TC 44/SC 6 | Resistance welding and allied mechanical joining |
| ISO/TC 44/SC 7 | Representation and terms |
| ISO/TC 44/SC 8 | Equipment for gas welding, cutting and allied processes |
| ISO/TC 44/SC 9 | Health and safety |
| ISO/TC 45 | Rubber and rubber products |
| ISO/TC 45/SC 1 | Rubber and plastics hoses and hose assemblies |
| ISO/TC 45/SC 2 | Testing and analysis |
| ISO/TC 45/SC 2/WG 5 | Chemical tests |
| ISO/TC 45/SC 3 | Raw materials (including latex) for use in the rubber industry |
| ISO/TC 45/SC 4 | Products (other than hoses) |
| ISO/TC 45/SC 4/WG 2 | Rubber seals |
| ISO/TC 46 | Information and documentation |
| ISO/TC 46/SC 10 | Requirements for document storage and conditions for preservation |
| ISO/TC 46/SC 11 | Archives/records management |
| ISO/TC 46/SC 4 | Technical interoperability |
| ISO/TC 46/SC 8 | Quality - Statistics and performance evaluation |
| ISO/TC 46/SC 9 | Identification and description |
| ISO/TC 47 | Chemistry |
| ISO/TC 48 | Laboratory equipment |
| ISO/TC 48/SC 3 | Thermometers |
| ISO/TC 48/SC 4 | Density measuring instruments |
| ISO/TC 5 | Ferrous metal pipes and metallic fittings |
| ISO/TC 5/SC 1 | Steel tubes |
| ISO/TC 5/SC 10 | Metallic flanges and their joints |
| ISO/TC 5/SC 11 | Metal hoses and expansion joints |
| ISO/TC 5/SC 2 | Cast iron pipes, fittings and their joints |
| ISO/TC 5/SC 5 | Threaded fittings, solder fittings, welding fittings, pipe threads, thread gauges |
| ISO/TC 51 | Pallets for unit load method of materials handling |
| ISO/TC 52 | Light gauge metal containers |
| ISO/TC 54 | Essential oils |
| ISO/TC 58 | Gas cylinders |
| ISO/TC 58/SC 2 | Cylinder fittings |
| ISO/TC 58/SC 3 | Cylinder design |
| ISO/TC 58/SC 3/WG 27 | Composite cylinders |
| ISO/TC 58/SC 4 | Operational requirements for gas cylinders |
| ISO/TC 59 | Buildings and civil engineering works |
| ISO/TC 59/SC 13 | Organization and digitization of information about buildings and civil engineering works, including building information modelling (BIM) |
| ISO/TC 59/SC 13/JWG 14 | Joint ISO/TC 59/SC 13 - ISO/TC 211 WG: GIS-BIM interoperability |
| ISO/TC 59/SC 14 | Design life |
| ISO/TC 59/SC 15 | Framework for the description of housing performance |
| ISO/TC 59/SC 16 | Accessibility and usability of the built environment |
| ISO/TC 59/SC 17 | Sustainability in buildings and civil engineering works |
| ISO/TC 59/SC 18 | Construction procurement |
| ISO/TC 59/SC 19 | Prefabricated building |
| ISO/TC 59/SC 2 | Terminology and harmonization of languages |
| ISO/TC 59/SC 8 | Sealants |
| ISO/TC 6 | Paper, board and pulps |
| ISO/TC 6/SC 2 | Test methods and quality specifications for paper and board |
| ISO/TC 60 | Gears |
| ISO/TC 60/SC 1 | Nomenclature and wormgearing |
| ISO/TC 60/SC 2 | Gear capacity calculation |
| ISO/TC 61 | Plastics |
| ISO/TC 61/SC 1 | Terminology |
| ISO/TC 61/SC 1/WG 1 | Terms and definitions |
| ISO/TC 61/SC 1/WG 3 | Symbols |
| ISO/TC 61/SC 10 | Cellular plastics |
| ISO/TC 61/SC 10/WG 10 | Plastic insulation |
| ISO/TC 61/SC 10/WG 11 | Physical and chemical properties |
| ISO/TC 61/SC 10/WG 12 | Mechanical and endurance properties |
| ISO/TC 61/SC 10/WG 14 | Products and materials |
| ISO/TC 61/SC 11 | Products |
| ISO/TC 61/SC 11/WG 11 | Wood-plastic composites |
| ISO/TC 61/SC 11/WG 3 | Plastics films and sheeting |
| ISO/TC 61/SC 11/WG 5 | Polymeric adhesives |
| ISO/TC 61/SC 12 | Thermosetting materials |
| ISO/TC 61/SC 12/WG 5 | Unsaturated polyesters, epoxy resins and other resins |
| ISO/TC 61/SC 12/WG 6 | Polyurethane raw materials |
| ISO/TC 61/SC 13 | Composites and reinforcement fibres |
| ISO/TC 61/SC 13/WG 1 | Reinforcements and reinforcement products |
| ISO/TC 61/SC 13/WG 2 | Laminates and moulding compounds |
| ISO/TC 61/SC 14 | Environmental aspects |
| ISO/TC 61/SC 14/WG 1 | Terminology, classifications and general guidance |
| ISO/TC 61/SC 14/WG 2 | Biodegradability |
| ISO/TC 61/SC 14/WG 3 | Biobased plastics |
| ISO/TC 61/SC 14/WG 4 | Characterization of plastics leaked into the environment (including microplastics) and quality control criteria of respective methods |
| ISO/TC 61/SC 14/WG 5 | Mechanical and chemical recycling |
| ISO/TC 61/SC 2 | Mechanical behavior |
| ISO/TC 61/SC 2/WG 1 | Static behavior |
| ISO/TC 61/SC 2/WG 2 | Hardness and surface properties |
| ISO/TC 61/SC 2/WG 3 | Impact and high speed properties |
| ISO/TC 61/SC 2/WG 5 | Temperature dependent behavior |
| ISO/TC 61/SC 2/WG 6 | Dimensions of test specimens |
| ISO/TC 61/SC 2/WG 7 | Fracture and fatigue behavior |
| ISO/TC 61/SC 2/WG 8 | Forms of data presentation |
| ISO/TC 61/SC 4 | Burning behaviour |
| ISO/TC 61/SC 4/WG 10 | Lighters |
| ISO/TC 61/SC 4/WG 2 | Smoke opacity and corrosivity |
| ISO/TC 61/SC 4/WG 8 | Ignitability and fire growth |
| ISO/TC 61/SC 4/WG 9 | Composites and semi-finished products |
| ISO/TC 61/SC 5 | Physical-chemical properties |
| ISO/TC 61/SC 5/WG 11 | Analytical methods |
| ISO/TC 61/SC 5/WG 5 | Viscosity |
| ISO/TC 61/SC 5/WG 8 | Thermal analysis |
| ISO/TC 61/SC 5/WG 9 | Rheology |
| ISO/TC 61/SC 6 | Ageing, chemical and environmental resistance |
| ISO/TC 61/SC 6/WG 2 | Exposure to light |
| ISO/TC 61/SC 6/WG 3 | Various exposures |
| ISO/TC 61/SC 6/WG 7 | Basic standards |
| ISO/TC 61/SC 9 | Thermoplastic materials |
| ISO/TC 61/SC 9/WG 14 | Polymer dispersions |
| ISO/TC 61/SC 9/WG 18 | Preparation of test specimens |
| ISO/TC 61/SC 9/WG 20 | Poly(vinyl chloride) |
| ISO/TC 61/SC 9/WG 26 | Thermoplastic elastomers |
| ISO/TC 61/SC 9/WG 6 | Polyolefins |
| ISO/TC 61/SC 9/WG 7 | Styrene polymers |
| ISO/TC 61/SC 9/WG 8 | Polyamides |
| ISO/TC 63 | Glass containers |
| ISO/TC 67 | Oil and gas industries including lower carbon energy |
| ISO/TC 67/SC 10 | Enhanced oil recovery |
| ISO/TC 67/SC 2 | Pipeline transportation systems |
| ISO/TC 67/SC 3 | Drilling and completion fluids, well cements and treatment fluids |
| ISO/TC 67/SC 4 | Drilling, production and injection equipment |
| ISO/TC 67/SC 5 | Casing, tubing and drill pipe |
| ISO/TC 67/SC 6 | Process equipment, piping, systems, and related safety |
| ISO/TC 67/SC 7 | Offshore structures |
| ISO/TC 67/SC 8 | Arctic operations |
| ISO/TC 67/SC 9 | Production, transport and storage facilities for cryogenic liquefied gases |
| ISO/TC 67/WG 5 | Aluminium alloy pipes |
| ISO/TC 68 | Financial services |
| ISO/TC 68/SC 2 | Financial Services, security |
| ISO/TC 68/SC 8 | Reference data for financial services |
| ISO/TC 68/SC 9 | Information exchange for financial services |
| ISO/TC 69 | Applications of statistical methods |
| ISO/TC 69/SC 4 | Applications of statistical methods in product and process management |
| ISO/TC 69/SC 5 | Acceptance sampling |
| ISO/TC 69/SC 6 | Measurement methods and results |
| ISO/TC 69/SC 7 | Applications of statistical and related techniques for the implementation of Six Sigma |
| ISO/TC 69/SC 8 | Application of statistical and related methodology for new technology and product development |
| ISO/TC 70 | Internal combustion engines |
| ISO/TC 70/SC 7 | Tests for lubricating oil filters |
| ISO/TC 70/SC 7/WG 2 | Review of the no-reproducibility of Round Robin filtration efficiency results |
| ISO/TC 70/SC 8 | Exhaust gas emission measurement |
| ISO/TC 70/SC 8/WG 6 | Test bed measurement |
| ISO/TC 70/WG 10 | Reciprocating internal combustion engine driven generating sets - Electrical aspect |
| ISO/TC 70/WG 13 | Air-borne noise |
| ISO/TC 70/WG 14 | Reciprocating internal combustion engine driven generating sets - Mechanical aspect |
| ISO/TC 70/WG 2 | Terms and definitions |
| ISO/TC 71 | Concrete, reinforced concrete and pre-stressed concrete |
| ISO/TC 71/SC 1 | Test methods for concrete |
| ISO/TC 71/SC 3 | Concrete production and execution of concrete structures |
| ISO/TC 71/SC 4 | Performance requirements for structural concrete |
| ISO/TC 72 | Textile machinery and accessories |
| ISO/TC 72/SC 1 | Spinning preparatory, spinning, twisting and winding machinery and accessories |
| ISO/TC 72/SC 3 | Machinery for fabric manufacturing including preparatory machinery and accessories |
| ISO/TC 72/SC 4 | Dyeing and finishing machinery and accessories |
| ISO/TC 72/SC 5 | Industrial laundry and dry-cleaning machinery and accessories |
| ISO/TC 72/SC 8 | Safety requirements for textile machinery |
| ISO/TC 74 | Cement and lime |
| ISO/TC 76 | Transfusion, infusion and injection, and blood processing equipment for medical and pharmaceutical use |
| ISO/TC 79 | Light metals and their alloys |
| ISO/TC 79/SC 11 | Titanium |
| ISO/TC 79/SC 2 | Organic and anodic oxidation coatings on aluminium |
| ISO/TC 79/SC 4 | Unalloyed (refined) aluminium ingots |
| ISO/TC 79/SC 5 | Magnesium and alloys of cast or wrought magnesium |
| ISO/TC 79/SC 6 | Wrought aluminium and aluminium alloys |
| ISO/TC 79/SC 7 | Aluminium and cast aluminium alloys |
| ISO/TC 79/SC 9 | Symbolization |
| ISO/TC 8 | Ships and marine technology |
| ISO/TC 8/SC 1 | Maritime safety |
| ISO/TC 8/SC 11 | Intermodal and Short Sea Shipping |
| ISO/TC 8/SC 12 | Ships and marine technology - Large yachts |
| ISO/TC 8/SC 2 | Marine environment protection |
| ISO/TC 8/SC 3 | Piping and machinery |
| ISO/TC 8/SC 4 | Outfitting and deck machinery |
| ISO/TC 8/SC 6 | Navigation and ship operations |
| ISO/TC 8/SC 7 | Inland navigation vessels |
| ISO/TC 8/SC 8 | Ship design |
| ISO/TC 81 | Common names for pesticides and other agrochemicals |
| ISO/TC 83 | Sports and other recreational facilities and equipment |
| ISO/TC 83/SC 4 | Snowsports equipment |
| ISO/TC 83/SC 5 | Ice hockey equipment and facilities |
| ISO/TC 83/SC 6 | Martial arts |
| ISO/TC 83/WG 9 | Floating leisure articles |
| ISO/TC 84 | Devices for administration of medicinal products and catheters |
| ISO/TC 85 | Nuclear energy, nuclear technologies, and radiological protection |
| ISO/TC 85/SC 2 | Radiological protection |
| ISO/TC 85/SC 5 | Nuclear installations, processes and technologies |
| ISO/TC 85/SC 6 | Reactor technology |
| ISO/TC 86 | Refrigeration and air-conditioning |
| ISO/TC 86/SC 1 | Safety and environmental requirements for refrigerating systems |
| ISO/TC 86/SC 1/WG 1 | Safety and environmental requirements for refrigerating systems and heat pumps |
| ISO/TC 86/SC 4 | Testing and rating of refrigerant compressors |
| ISO/TC 86/SC 6 | Testing and rating of air-conditioners and heat pumps |
| ISO/TC 86/SC 6/WG 1 | Air-source air-conditioners and heat pumps |
| ISO/TC 86/SC 6/WG 10 | Energy recovery ventilators |
| ISO/TC 86/SC 6/WG 12 | Heat pump water heaters |
| ISO/TC 86/SC 6/WG 3 | Water and brine source heat pumps and air-conditioners |
| ISO/TC 86/SC 7 | Testing and rating of commercial refrigerated display cabinets |
| ISO/TC 86/SC 8 | Refrigerants and refrigeration lubricants |
| ISO/TC 86/SC 8/WG 5 | Refrigerants - Designation and safety classification |
| ISO/TC 87 | Cork |
| ISO/TC 89 | Wood-based panels |
| ISO/TC 89/SC 1 | Fibre boards |
| ISO/TC 89/SC 2 | Particle boards |
| ISO/TC 89/SC 3 | Plywood |
| ISO/TC 91 | Surface active agents |
| ISO/TC 92 | Fire safety |
| ISO/TC 92/SC 1 | Fire initiation and growth |
| ISO/TC 92/SC 2 | Fire containment |
| ISO/TC 92/SC 3 | Fire threat to people and environment |
| ISO/TC 92/SC 4 | Fire safety engineering |
| ISO/TC 93 | Starch (including derivatives and by-products) |
| ISO/TC 94 | Personal safety -- Personal protective equipment |
| ISO/TC 94/SC 13 | Protective clothing |
| ISO/TC 94/SC 14 | Firefighters' personal equipment |
| ISO/TC 94/SC 15 | Respiratory protective devices |
| ISO/TC 94/SC 3 | Foot protection |
| ISO/TC 94/SC 6 | Eye and face protection |
| ISO/TC 96 | Cranes |
| ISO/TC 96/SC 10 | Design principles and requirements |
| ISO/TC 96/SC 2 | Terminology |
| ISO/TC 96/SC 3 | Selection of ropes |
| ISO/TC 96/SC 4 | Test methods |
| ISO/TC 96/SC 5 | Use, operation and maintenance |
| ISO/TC 96/SC 6 | Mobile cranes |
| ISO/TC 96/SC 7 | Tower cranes |
| ISO/TC 96/SC 8 | Jib cranes |
| ISO/TC 96/SC 9 | Bridge and gantry cranes |
| ISO/TC 98 | Bases for design of structures |
| ISO/TC 98/SC 1 | Terminology and symbols |
| ISO/TC 98/SC 2 | Reliability of structures |
| ISO/TC 98/SC 3 | Loads, forces and other actions |
| IULTCS | International Union of Leather Technologists and Chemists Societies |
normeUNI
@normeUNI
normeUNI
slideshare UNI
