X
Sito Internet: www.unichim.it
Presidente: Bruno Brianzoli
Segretario Generale: Giovanni Perego
Piazzale R. Morandi 2 - 20121 Milano - Tel. 0276004450 - Telefax 0276014176
CAMPO DI ATTIVITÀ
Problemi analitici di base - Pitture per edilizia, vernici per legno, per materie plastiche e per la protezione di strutture in metallo - Adesivi - Prodotti petroliferi e lubrificanti - Fluidi per la lavorazione dei metalli - Combustibili solidi - Agenti tensioattivi - Campionamento ed analisi delle acque reflue, superficiali, potabili, ecc. - Campionamento, metodologie di analisi, determinazione degli inquinanti nell'atmosfera e nei flussi delle emissioni - Campionamento e analisi negli ambienti di lavoro e studi sul microclima ambientale - Metodi di analisi per i principali prodotti antiparassitari e determinazione dei loro residui - Prodotti fertilizzanti - Prodotti aromatizzanti e oli essenziali - Disinfettanti - Incapsulanti per cemento amianto - Interpretazione delle norme sulla certificazione per il settore chimico - Taratura della strumentazione analitica chimica - Metodi informatici di statistica chimica - Chemiometria - Analisi delle superfici - Validazione di metodi analitici - Materiali di riferimento - Sistemi di gestione della qualità, dell'ambiente, della sicurezza e dell'igiene ambientale nell'industria chimica - Fuochi artificiali - Esplosivi per uso civile - Sistemi qualità nei laboratori microbiologici
TC CEN DI COMPETENZA | |
CEN/TC 137 | Assessment of workplace exposure to chemical and biological agents |
CEN/TC 137/WG 5 | Measurement of biological agents |
CEN/TC 139 | Paints and varnishes |
CEN/TC 164/WG 9 | Drinking water treatment |
CEN/TC 19 | Gaseous and liquid fuels, lubricants and related products of petroleum, synthetic and biological origin |
CEN/TC 19/JWG 1 | Vegetable fats and oils and their by-products for use in automotive fuels (Joint working group with CEN/TC 307) |
CEN/TC 19/WG 14 | Cold flow properties |
CEN/TC 19/WG 15 | Vapour pressure methods |
CEN/TC 19/WG 27 | Elemental analysis of petroleum and related products |
CEN/TC 19/WG 31 | Total contamination |
CEN/TC 19/WG 33 | Bio-lubricants |
CEN/TC 19/WG 34 | Diesel fuel cold operability correlation |
CEN/TC 19/WG 36 | Precision evaluation |
CEN/TC 19/WG 38 | New Fuels Coordination and Planning |
CEN/TC 19/WG 40 | Distillation characteristics |
CEN/TC 19/WG 9 | Chromatographic test methods |
CEN/TC 193 | Adhesives |
CEN/TC 193/SC 1 | Adhesives for wood and derived timber products |
CEN/TC 193/WG 1 | General terminology - General physical and chemical tests |
CEN/TC 193/WG 2 | Structural adhesives |
CEN/TC 193/WG 3 | Adhesives for paper and board, packaging and disposable sanitary products |
CEN/TC 193/WG 4 | Building adhesives |
CEN/TC 193/WG 5 | Adhesives for leather and footwear |
CEN/TC 212 | Fireworks |
CEN/TC 216 | Chemical disinfectants and antiseptics |
CEN/TC 223 | Soil improvers and growing media |
CEN/TC 230 | Water analysis |
CEN/TC 230/WG 1 | Physical and biochemical methods |
CEN/TC 230/WG 2 | Biological methods co-ordination group |
CEN/TC 230/WG 4 | Performance Requirements for Water Monitoring Equipment |
CEN/TC 260 | Fertilizers and liming materials |
CEN/TC 276 | Surface active agents |
CEN/TC 298 | Pigments and extenders |
CEN/TC 317 | Derivatives from coal pyrolysis |
CEN/TC 321 | Explosives for civil uses |
CEN/TC 332 | Laboratory equipment |
CEN/TC 336 | Bituminous binders |
CEN/TC 360 | Coating systems for chemical apparatus and plants against corrosion |
CEN/TC 361 | Thick synthetic modified bitumous coating masses - Definitions and requirements/Test methods |
CEN/TC 411 | Bio-based products |
CEN/TC 441 | Fuel labelling |
CEN/TC 455 | Plant Biostimulants |
CEN/TC 462 | Regulated chemicals in products |
TC ISO DI COMPETENZA | |
ISO/TC 134 | Fertilizers, soil conditioners and beneficial substances |
ISO/TC 147 | Water quality |
ISO/TC 147/SC 1 | Terminology |
ISO/TC 147/SC 2 | Physical, chemical and biochemical methods |
ISO/TC 147/SC 4 | Microbiological methods |
ISO/TC 147/SC 5 | Biological methods |
ISO/TC 147/SC 6 | Sampling (general methods) |
ISO/TC 190 | Soil quality |
ISO/TC 190/SC 3 | Chemical and physical characterization |
ISO/TC 190/SC 4 | Biological characterization |
ISO/TC 190/SC 7 | Impact assessment |
ISO/TC 201 | Surface chemical analysis |
ISO/TC 201/SC 1 | Terminology |
ISO/TC 201/SC 10 | X-ray Reflectometry (XRR) and X-ray Fluorescence (XRF) Analysis |
ISO/TC 201/SC 3 | Data management and treatment |
ISO/TC 201/SC 4 | Depth profiling |
ISO/TC 201/SC 6 | Secondary ion mass spectrometry |
ISO/TC 201/SC 7 | Electron spectroscopies |
ISO/TC 201/SC 8 | Glow discharge spectroscopy |
ISO/TC 201/SC 9 | Scanning probe microscopy |
ISO/TC 202 | Microbeam analysis |
ISO/TC 202/SC 2 | Electron probe microanalysis |
ISO/TC 202/SC 3 | Analytical electron microscopy |
ISO/TC 256 | Pigments, dyestuffs and extenders |
ISO/TC 264 | Fireworks |
ISO/TC 27 | Coal and coke |
ISO/TC 27/SC 1 | Coal preparation: Terminology and performance |
ISO/TC 27/SC 3 | Coke |
ISO/TC 27/SC 4 | Sampling |
ISO/TC 27/SC 5 | Methods of analysis |
ISO/TC 28 | Petroleum and related products, fuels and lubricants from natural or synthetic sources |
ISO/TC 28/SC 2 | Measurement of petroleum and related products |
ISO/TC 28/SC 4 | Classifications and specifications |
ISO/TC 28/SC 5 | Measurement of refrigerated hydrocarbon and non-petroleum based liquefied gaseous fuels |
ISO/TC 28/SC 7 | Liquid Biofuels |
ISO/TC 298 | Rare earth |
ISO/TC 35 | Paints and varnishes |
ISO/TC 35/SC 12 | Preparation of steel substrates before application of paints and related products |
ISO/TC 35/SC 14 | Protective paint systems for steel structures |
ISO/TC 35/SC 9 | General test methods for paints and varnishes |
ISO/TC 47 | Chemistry |
ISO/TC 48 | Laboratory equipment |
ISO/TC 48/SC 3 | Thermometers |
ISO/TC 48/SC 4 | Density measuring instruments |
ISO/TC 54 | Essential oils |
ISO/TC 81 | Common names for pesticides and other agrochemicals |
ISO/TC 91 | Surface active agents |
ISO/TC 93 | Starch (including derivatives and by-products) |