X
Sito Internet: www.cti2000.it
Presidente: Cesare Boffa
Direttore Generale: Antonio Panvini
Viale Elvezia 12 - 20154 Milano - Tel. 02 2662651 - Telefax 02 26626550
CAMPO DI ATTIVITÀ
Fonti Vettori di Energia: Biocombustibili solidi; Biocombustibili liquidi (olii e grassi animali e vegetali, loro sottoprodotti e derivati, etanolo, biodiesel, olii pirolitici per usi diversi dell’autorizzazione); Biocombustibili gassosi (biogas/biometano da fermentazione anaerobica, gassificazione, pirolisi); Combustibili solidi secondari (prevalentemente da rifiuti); Idrogeno (con esclusione auto a idrogeno); Energia solare); Combustibili fossili per il riscaldamento (affiancando Unichim); Combustibili non convenzionali per usi differenti dall’autotrazione (p.e. biocarburanti di seconda generazione) - Apparecchi ed impianti per il riscaldamento degli edifici: Componenti per impianti di riscaldamento, produzione acqua calda sanitaria e cottura, tra i quali: bruciatori, caldaiei, stufe, caminetti e barbecue, termocucine e affini, corpi scaldanti e relativi accessori), dispositivi di regolazione e automazione (termostati, domotica e building automation), pannelli solari termici; Progettazione, realizzazione, collaudo, esercizio, manutenzione degli impianti di riscaldamento; Certificazione energetica degli edifici: climatizzazione invernale (metodologie di calcolo, ecc.); Cogenerazione, Teleriscaldamento. (esclusi componenti, apparecchi, ecc. a gas naturale trattati dal CIG - Generatori e impianti in pressione (direttiva PED): Materiali, progettazione, costruzione, ispezione, componenti, sicurezza, ecc. per: recipienti a pressione non esposti a fiamma, caldaie a tubi d’acqua e a fumi; Integrità strutturale degli apparecchi a pressione; Esercizio e protezione degli impianti in pressione; Forni chimici e petrolchimici (per aspetti PED) - Trasmissione del calore e fluidodinamica: Metodologia di calcolo e verifica della trasmissione del calore; Materiali e prodotti per l’isolamento termico ed acustico; caratteristiche termo igrometriche e prestazioni energetico-ambientali degli edifici e dei componenti per l’edilizia; Fabbisogno termico degli edifici - Climatizzazione, raffrescamento e refrigerazione: Filtri e filtrazione; Certificazione energetica degli edifici: climatizzazione estiva (metodologia di calcolo, ecc.); Macchine: condizionatori, pompe di calore, scambiatori di calore, compressori frigoriferi e loro componenti; Apparecchi per la refrigerazione domestica e commerciale, inclusi banchi refrigeranti e celle frigorifere; Progettazione, realizzazione, collaudo, esercizio, manutenzione degli impianti di ventilazione e condizionamento. Sono inclusi anche gli impianti di trattamento aria per destinazione specifiche - Uso razionale e gestione dell’energia: Energy management; Società di fornitura di servizi energetici; Servizi energetici; Audit energetici; Energy managers ed esperti in gestione dell’energia; Sistemi di gestione energetica; Benchmarking nell’energy management; Modalità di calcolo del risparmio e dell’efficienza energetica; Sistemi di energia tecnica - Misure e strumentazione: Contabilizzazione e contatori di calore; Ripartitori spese di riscaldamento; Misure termiche in campo - Apparecchi ed impianti industriali e altri argomenti non ricollegabili a classificazione precedente: Compressori, utensili e macchine pneumatiche; Forni industriali;Turbine a gas e turbine a vapore; Centrali termoelettriche (esclusa parte elettrica); Distributori di carburante e serbatoi; Motori stazionari; Altri motori primi per la generazione di energia;impianti per la produzione e l’utilizzo di biogas e biometano; Sicurezza degli impianti a rischio di incidente rilevante (con UNICHIM)
TC CEN DI COMPETENZA | |
CEN/CLC/JTC 10 | Material efficiency aspects for products in scope of Ecodesign legislation |
CEN/CLC/JTC 14 | Energy management and energy efficiency in the framework of energy transition |
CEN/CLC/JTC 14/WG 1 | Energy audits |
CEN/CLC/JTC 14/WG 4 | Energy financial aspects |
CEN/CLC/JTC 14/WG 5 | Guarantees of Origin related to energy |
CEN/CLC/JTC 2 | Power Engineering |
CEN/TC 110 | Heat exchangers |
CEN/TC 110/WG 1 | Heat exchangers used in the field of refrigeration and air conditioning |
CEN/TC 110/WG 6 | Revision of EN 308 |
CEN/TC 113 | Heat pumps and air conditioning units |
CEN/TC 113/WG 10 | Heat pumps for domestic hot water production and revision of EN 16147 |
CEN/TC 113/WG 11 | Direct expansion-to-water units |
CEN/TC 113/WG 14 | Hydronic fan coil units |
CEN/TC 113/WG 15 | Roof-top units |
CEN/TC 113/WG 6 | Refrigerant compressors - Presentation of performance data |
CEN/TC 113/WG 7 | Heat Pumps, air conditioners and chilling liquid packages - testing and rating at part load conditions |
CEN/TC 113/WG 8 | Rating and testing for performance |
CEN/TC 113/WG 9 | Sound rating of heat pumps, air conditioners and liquid chilling packages |
CEN/TC 130 | Space heating and/or cooling appliances without integral thermal sources |
CEN/TC 130/WG 10 | Trench convectors and fan assisted radiators and convectors |
CEN/TC 130/WG 11 | Radiators |
CEN/TC 130/WG 12 | Connections for heating appliances |
CEN/TC 130/WG 13 | Determination of parameters for the efficiency of heating and cooling emission products in relation to prEN 15316-2. Coordination - Group |
CEN/TC 130/WG 7 | Pre-fabricated heating panels, definitions, testing and methods for determining heat outputs |
CEN/TC 130/WG 9 | Floor heating - Systems and components |
CEN/TC 156 | Ventilation for buildings |
CEN/TC 156/WG 1 | Terminology |
CEN/TC 156/WG 14 | Ventilation of commercial kitchens |
CEN/TC 156/WG 16 | Joint Working Group between CEN/TC 156 and CEN/TC 113 - Multifunctional balanced ventilation units for single family dwellings, including heat pumps |
CEN/TC 156/WG 17 | Fans |
CEN/TC 156/WG 18 | Ventilation in hospitals |
CEN/TC 156/WG 2 | Natural and mechanical powered residential ventilation |
CEN/TC 156/WG 20 | Ventilation and Room-Conditioning Systems in non-Residential Buildings |
CEN/TC 156/WG 21 | Energy performance calculation of ventilation and cooling systems |
CEN/TC 156/WG 23 | Ventilation for Buildings - Inspection and checking |
CEN/TC 156/WG 3 | Ductwork |
CEN/TC 156/WG 4 | Air terminal devices |
CEN/TC 156/WG 5 | Air handling units |
CEN/TC 156/WG 8 | Installation |
CEN/TC 156/WG 9 | Fire precautions for air distribution systems in buildings |
CEN/TC 166 | Chimneys |
CEN/TC 166/SC 2 | Chimneys and their components with inner linings of metal |
CEN/TC 166/SC 2/WG 1 | Corrosion Test Method |
CEN/TC 166/SC 2/WG 2 | System Chimneys and Test Methods |
CEN/TC 166/SC 2/WG 3 | Metal chimneys - Liners and connecting flue pipes |
CEN/TC 166/SC 2/WG 4 | Multiappliance systems |
CEN/TC 166/SC 2/WG 5 | Metal chimneys for room sealed applications |
CEN/TC 166/WG 1 | General requirements |
CEN/TC 166/WG 2 | Thermal and fluid dynamic calculation methods for chimneys |
CEN/TC 166/WG 4 | Chimneys and their components with inner linings of plastic |
CEN/TC 171 | Heat cost allocation |
CEN/TC 171/WG 1 | Heat cost allocators |
CEN/TC 176 | Thermal energy meters |
CEN/TC 176/WG 2 | Thermal energy meters - Requirements, test methods and technical editing |
CEN/TC 182 | Refrigerating systems, safety and environmental requirements |
CEN/TC 182/WG 11 | Revision of EN 14624 |
CEN/TC 182/WG 12 | Flammable Refrigerants Standardization Request M/555 |
CEN/TC 182/WG 2 | Design and testing |
CEN/TC 182/WG 4 | Competence |
CEN/TC 182/WG 6 | Revision of EN 378 |
CEN/TC 182/WG 7 | JWG CEN/TC 182/CEN/TC 54 Pressure vessels for refrigerating systems |
CEN/TC 182/WG 9 | Tightness of components |
CEN/TC 186 | Industrial thermoprocessing - Safety |
CEN/TC 186/WG 1 | Industrial furnaces and heating equipment - Common safety requirements |
CEN/TC 186/WG 2 | Combustion - Gas and Liquids - Safety requirements |
CEN/TC 186/WG 3 | Controlled atmospheres - Safety requirements |
CEN/TC 186/WG 4 | Protective systems |
CEN/TC 195 | Cleaning equipment for air and other gases |
CEN/TC 195/WG 2 | HEPA and ULPA filters |
CEN/TC 228 | Heating systems and water based cooling systems in buildings |
CEN/TC 228/WG 1 | General performance requirements of heating systems and sub-systems in buildings |
CEN/TC 228/WG 4 | Calculation methods and system performance and evaluation |
CEN/TC 232 | Compressors, vacuum pumps and their systems |
CEN/TC 247 | Building Automation, Controls and Building Management |
CEN/TC 247/WG 4 | Open System Data Transmission |
CEN/TC 247/WG 6 | Electronic control equipment for HVAC applications, integrated room automation, controls and management systems |
CEN/TC 265 | Metallic tanks for the storage of liquids |
CEN/TC 265/WG 8 | Shop fabricated tanks |
CEN/TC 265/WG 9 | Revision of EN 14015 |
CEN/TC 269 | Shell and water-tube boilers |
CEN/TC 269/WG 1 | Water-tube boilers |
CEN/TC 269/WG 2 | Shell boilers |
CEN/TC 270 | Internal combustion engines |
CEN/TC 281 | Appliances, solid fuels and firelighters for barbecuing |
CEN/TC 281/WG 1 | Barbecues burning solid fuels |
CEN/TC 281/WG 5 | Solid fuels and firelighters for barbecuing and single-use-barbecues |
CEN/TC 295 | Residential solid fuel burning appliances |
CEN/TC 295/WG 1 | Appliances fired by solid fuels |
CEN/TC 295/WG 2 | Appliances fired by pellets |
CEN/TC 295/WG 3 | Heat storage stoves (SHRA) and sauna stoves |
CEN/TC 295/WG 4 | Tiled Stoves |
CEN/TC 295/WG 5 | Measurement methods |
CEN/TC 295/WG 6 | CPR and Mandates |
CEN/TC 297 | Free-standing industrial chimneys |
CEN/TC 312 | Thermal solar systems and components |
CEN/TC 312/WG 1 | Solar collectors |
CEN/TC 312/WG 2 | Factory made systems |
CEN/TC 312/WG 3 | Thermal solar systems and components; Custom built systems |
CEN/TC 335 | Solid biofuels |
CEN/TC 343 | Solid recovered materials, including solid recovered fuels |
CEN/TC 363 | Organic contaminants ('tar') in Biomass producer gases |
CEN/TC 371 | Energy Performance of Buildings |
CEN/TC 371/WG 1 | EPBD Standards group |
CEN/TC 371/WG 2 | EPB CAG |
CEN/TC 371/WG 3 | Development of EN 16798-1-1 |
CEN/TC 371/WG 4 | Development of EN 16798-1-2 |
CEN/TC 383 | Sustainably produced biomass for energy applications |
CEN/TC 383/WG 3 | Biodiversity and Environmental aspects |
CEN/TC 393 | Equipment for storage tanks and for service stations |
CEN/TC 393/WG 2 | Leak detecting devices for tanks and pipes |
CEN/TC 393/WG 3 | Overfill prevention devices for static tanks for liquid petroleum fuels |
CEN/TC 393/WG 6 | Underground pipework systems for petrol filling stations |
CEN/TC 399 | Gas Turbines applications - Safety |
CEN/TC 413 | Insulated means of transport for temperature sensitive goods with or without cooling and/or heating device |
CEN/TC 413/WG 1 | Insulated means of transport for temperature sensitive goods - Equipment |
CEN/TC 413/WG 2 | EN 16440 - devices |
CEN/TC 44 | Commercial and Professional Refrigerating Appliances and Systems, Performance and Energy Consumption |
CEN/TC 44/WG 1 | Commercial refrigerated display cabinets |
CEN/TC 44/WG 2 | Service refrigerated cabinets and counters for use in commercial kitchens |
CEN/TC 44/WG 4 | Walk-in cold rooms |
CEN/TC 44/WG 5 | Refrigerated display cabinets for artisan and self made gelato |
CEN/TC 44/WG 6 | Commercial beverage coolers and ice cream freezers |
CEN/TC 44/WG 7 | Walk-in cold rooms packaged Refrigerating Units |
CEN/TC 451 | Water wells and borehole heat exchangers |
CEN/TC 451/WG 1 | Water wells |
CEN/TC 451/WG 2 | Borehole heat exchangers |
CEN/TC 46 | Fireplaces for liquid fuels |
CEN/TC 46/WG 1 | Oil stoves with vaporizing burners |
CEN/TC 46/WG 2 | Fireplaces for Ethanol/Gel |
CEN/TC 47 | Atomizing oil burners and their components - Function - Safety - Testing |
CEN/TC 47/WG 4 | Oil supply systems |
CEN/TC 54 | Unfired pressure vessels |
CEN/TC 54/WG 11 | Pressure equipment and components fabricated with additive manufacturing methods |
CEN/TC 54/WG 5 | Accumulators |
CEN/TC 54/WG 51 | A - Overall co-ordination, scope of standard and vessel classification |
CEN/TC 54/WG 52 | B - Material selection |
CEN/TC 54/WG 53 | C - Design methods |
CEN/TC 54/WG 54 | D - Manufacture |
CEN/TC 54/WG 55 | E - Inspection and testing |
CEN/TC 54/WG 58 | G - Nodular cast iron vessels |
CEN/TC 54/WG 59 | Creep |
CEN/TC 54/WG 6 | Pressure vessels constructed from nickel or nickel alloys |
CEN/TC 54/WG 60 | Aluminium |
CEN/TC 54/WG 7 | Pressure vessels constructed from titanium and titanium alloys |
CEN/TC 57 | Central heating boilers |
CEN/TC 57/WG 1 | Central heating boilers for solid fuels |
CEN/TC 57/WG 2 | Requirements for efficiency and emission and test methods for central heating boilers |
CEN/TC 57/WG 4 | Low pressure boilers |
CEN/TC 57/WG 5 | Heating boilers for fuel oil |
CEN/TC 57/WG 6 | Airborne noise emissions |
CEN/TC 57/WG 7 | Pellets burners and pellet burner/boiler units. |
CEN/TC 57/WG 8 | Energy efficiency requirements for warm water storage tanks |
CEN/TC 57/WG 9 | Electrical power consumption for heat generators |
CEN/TC 88 | Thermal insulating materials and products |
CEN/TC 88/WG 1 | Common general test methods |
CEN/TC 88/WG 10 | Building equipment and industrial installations |
CEN/TC 88/WG 11 | Vacuum insulation products (VIP) |
CEN/TC 88/WG 12 | Prefabricated products of bonded expanded perlite |
CEN/TC 88/WG 13 | Expanded cork boards (ICB) |
CEN/TC 88/WG 16 | Factory production control |
CEN/TC 88/WG 17 | Wood fibre boards (WF) |
CEN/TC 88/WG 18 | External thermal insulation composite systems |
CEN/TC 88/WG 19 | Polyethylene foam |
CEN/TC 88/WG 2 | Coordinating group |
CEN/TC 88/WG 20 | Expanded clay lightweight aggregates |
CEN/TC 88/WG 21 | Reflective insulation products |
CEN/TC 88/WG 22 | Factory made calcium silicate (CS) products |
CEN/TC 88/WG 3 | Mineral wool |
CEN/TC 88/WG 4 | Expanded polystyrene foam (EPS) |
CEN/TC 88/WG 5 | Rigid cellular polystyrene, extruded |
CEN/TC 88/WG 6 | Rigid cellular polyurethane and polyisocyanurate |
CEN/TC 88/WG 7 | Rigid cellular phenolic foam |
CEN/TC 88/WG 8 | Cellular glass (CG) |
CEN/TC 88/WG 9 | Mineral bonded wood wool (including multi-layered products) |
CEN/TC 89 | Thermal performance of buildings and building components |
CEN/TC 89/WG 10 | Moisture |
CEN/TC 89/WG 12 | Reflective insulation products |
CEN/TC 89/WG 13 | In-situ thermal performance of construction products, building elements and structures |
CEN/TC 89/WG 7 | Thermal properties of doors and windows |
SECT/SF EM | CEN-CLC/SF on Energy Management |
TC ISO DI COMPETENZA | |
ISO/TC 109 | Oil and gas burners |
ISO/TC 109/WG 1 | Forced draught gas burners |
ISO/TC 109/WG 2 | Forced draught oil burners |
ISO/TC 11 | Boilers and pressure vessels |
ISO/TC 117 | Fans |
ISO/TC 117/WG 10 | Vocabulary and definition of categories |
ISO/TC 117/WG 11 | Energy efficiency classification |
ISO/TC 117/WG 12 | System effect factors |
ISO/TC 117/WG 13 | Jet fans |
ISO/TC 117/WG 7 | Performance testing of fans |
ISO/TC 117/WG 9 | Air curtain units |
ISO/TC 118 | Compressors and pneumatic tools, machines and equipment |
ISO/TC 118/SC 1 | Process compressors |
ISO/TC 118/SC 3 | Pneumatic tools and machines |
ISO/TC 118/SC 3/WG 3 | Vibrations in hand-held tools |
ISO/TC 118/SC 3/WG 4 | Tightening of threaded fasteners |
ISO/TC 118/SC 3/WG 7 | Safety of fastener driving tools |
ISO/TC 118/SC 4 | Compressed air treatment technology |
ISO/TC 118/SC 4/WG 1 | Compressed air purity specification and compressed air treatment equipment |
ISO/TC 118/SC 6 | Air compressors and compressed air systems |
ISO/TC 118/SC 6/WG 1 | Performance specifications |
ISO/TC 118/SC 6/WG 2 | Safety |
ISO/TC 118/SC 6/WG 4 | Energy management |
ISO/TC 142 | Cleaning equipment for air and other gases |
ISO/TC 142/JWG 10 | Joint ISO/TC 142 - ISO/TC 85/SC 2 WG: Aerosol filters for nuclear applications |
ISO/TC 142/JWG 11 | Joint ISO/TC 142 - IEC/TC 59 WG: Portable room air cleaners for comfort applications |
ISO/TC 142/WG 1 | Terminology |
ISO/TC 142/WG 12 | Sustainability of air cleaning equipment and media |
ISO/TC 142/WG 13 | Biological equipment for waste gas treatment |
ISO/TC 142/WG 2 | UV-C technology |
ISO/TC 142/WG 3 | General ventilation filters |
ISO/TC 142/WG 4 | HEPA and ULPA filters |
ISO/TC 142/WG 5 | Dust collectors, droplet separators and purifiers |
ISO/TC 142/WG 7 | Cleanable filter media used in industrial applications |
ISO/TC 142/WG 8 | Gas-phase air cleaning devices |
ISO/TC 142/WG 9 | Particulate air filter intake systems for rotary machinery and stationary internal combustion engines |
ISO/TC 163 | Thermal performance and energy use in the built environment |
ISO/TC 163/SC 1 | Test and measurement methods |
ISO/TC 163/SC 1/WG 15 | Thermography of buildings and industrial installations |
ISO/TC 163/SC 1/WG 16 | In-situ measurement of thermal resistance and thermal transmittance of opaque building elements |
ISO/TC 163/SC 1/WG 17 | Solar heat gain coefficient of windows and doors |
ISO/TC 163/SC 1/WG 22 | Energy performance of underfloor air distribution systems |
ISO/TC 163/SC 1/WG 8 | Moisture content and moisture permeability |
ISO/TC 163/SC 2 | Calculation methods |
ISO/TC 163/SC 2/WG 15 | Energy Performance calculation methods |
ISO/TC 163/SC 3 | Thermal insulation products, components and systems |
ISO/TC 163/SC 3/WG 11 | Vacuum insulation panels |
ISO/TC 163/SC 3/WG 9 | Exterior insulation and finish systems |
ISO/TC 163/WG 4 | Joint ISO/TC 163 - ISO/TC 205 WG: Energy performance of buildings using holistic approach |
ISO/TC 180 | Solar energy |
ISO/TC 180/SC 1 | Climate - Measurement and data |
ISO/TC 180/SC 4 | Systems - Thermal performance, reliability and durability |
ISO/TC 180/WG 3 | Collector components and materials |
ISO/TC 185 | Safety devices for protection against excessive pressure |
ISO/TC 185/WG 18 | Performance testing |
ISO/TC 185/WG 19 | Safety devices for protection against excessive pressure -- Application, selection and installation of bursting disc safety devices |
ISO/TC 192 | Gas turbines |
ISO/TC 192/WG 10 | Gas turbine safety |
ISO/TC 192/WG 12 | Microturbines |
ISO/TC 192/WG 4 | Gas turbine |
ISO/TC 205 | Building environment design |
ISO/TC 205/WG 1 | General principles |
ISO/TC 205/WG 10 | Commissioning |
ISO/TC 205/WG 2 | Design of energy-efficient buildings |
ISO/TC 205/WG 3 | Building Automation and Control System (BACS) Design |
ISO/TC 205/WG 7 | Indoor visual environment |
ISO/TC 205/WG 8 | Radiant heating and cooling systems |
ISO/TC 205/WG 9 | Heating and cooling systems |
ISO/TC 238 | Solid biofuels |
ISO/TC 238/WG 1 | Terminology |
ISO/TC 238/WG 2 | Fuel specifications and classes |
ISO/TC 238/WG 4 | Physical and mechanical test methods |
ISO/TC 238/WG 5 | Chemical test methods |
ISO/TC 238/WG 6 | Sampling and sample preparation |
ISO/TC 238/WG 7 | Safety of solid biofuels |
ISO/TC 244 | Industrial furnaces and associated processing equipment |
ISO/TC 244/WG 1 | General safety requirements |
ISO/TC 244/WG 2 | Safety requirements for combustion and fuel handling systems |
ISO/TC 244/WG 3 | Method of energy balance and efficiency |
ISO/TC 244/WG 4 | Vocabulary |
ISO/TC 244/WG 5 | Protective system |
ISO/TC 244/WG 6 | Safety requirements for generation and use of protective and reactive gases |
ISO/TC 244/WG 7 | Safety Requirements for Steelmaking Equipment |
ISO/TC 255 | Biogas |
ISO/TC 255/WG 1 | Terms, definitions and classification scheme for the production, conditioning and utilization of biogas |
ISO/TC 300 | Solid recovered materials, including solid recovered fuels |
ISO/TC 300/WG 2 | Specification and classes |
ISO/TC 300/WG 4 | Physical and mechanical tests |
ISO/TC 300/WG 5 | Chemical tests and determination of biomass content |
ISO/TC 300/WG 6 | Safety of solid recovered fuels |
ISO/TC 301 | Energy management and energy savings |
ISO/TC 301/CAG | Chair's Advisory Group |
ISO/TC 301/TG 2 | Communication Task Group |
ISO/TC 301/TG 3 | Terminology Task group |
ISO/TC 301/WG 1 | Energy management |
ISO/TC 301/WG 2 | Metrics and measurement internal to the organization |
ISO/TC 339 | Small hydropower plants |
ISO/TC 341 | Heat supply network |
ISO/TC 70 | Internal combustion engines |
ISO/TC 70/SC 7 | Tests for lubricating oil filters |
ISO/TC 70/SC 8 | Exhaust gas emission measurement |
ISO/TC 70/WG 10 | Reciprocating internal combustion engine driven generating sets - Electrical aspect |
ISO/TC 70/WG 13 | Air-borne noise |
ISO/TC 70/WG 14 | Reciprocating internal combustion engine driven generating sets - Mechanical aspect |
ISO/TC 70/WG 2 | Terms and definitions |
ISO/TC 86 | Refrigeration and air-conditioning |
ISO/TC 86/SC 1 | Safety and environmental requirements for refrigerating systems |
ISO/TC 86/SC 1/WG 1 | Safety and environmental requirements for refrigerating systems and heat pumps |
ISO/TC 86/SC 4 | Testing and rating of refrigerant compressors |
ISO/TC 86/SC 6 | Testing and rating of air-conditioners and heat pumps |
ISO/TC 86/SC 6/WG 1 | Air-source air-conditioners and heat pumps |
ISO/TC 86/SC 6/WG 10 | Energy recovery ventilators |
ISO/TC 86/SC 6/WG 12 | Heat pump water heaters |
ISO/TC 86/SC 6/WG 3 | Water and brine source heat pumps and air-conditioners |
ISO/TC 86/SC 7 | Testing and rating of commercial refrigerated display cabinets |
ISO/TC 86/SC 8 | Refrigerants and refrigeration lubricants |
ISO/TC 86/SC 8/WG 5 | Refrigerants - Designation and safety classification |